May I ask for a version for WXR-2533DHP (Qualcomm Atheros IPQ8064)?
Thanks
9 days uptime on my own build and so far all devices still available
Nice job @BrainSlayer if that issue is really gone now
2 Likes
That was easy, cheers.
If anyone else needs to build with kmods you need to replace the settings in .config with config.buildinfo from releases before you add the kmods in "make menuconfig"
Edit: My MT7921 works again but it only gets 4 mbits down from WAN compared to 300-400 mbit on stock openwrt. I can still iperf3 to my firewall locally at that speed. I'm thinking it's probably some kind of compatibility issue with NSS.
Edit2: Fixed it, just had to run "ethtool -K phy2-ap0 tx-checksumming off" to exclude the Mediatek adapter from NSS. I'll add that to my startup scripts and we should be good.
Local iperf3 from cell phone to firewall
iperf3 -c 192.168.5.1
Connecting to host 192.168.5.1, port 5201
[ 5] local 192.168.5.123 port 40152 connected to 192.168.5.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 22.9 MBytes 192 Mbits/sec 45 489 KBytes
[ 5] 1.00-2.00 sec 29.5 MBytes 248 Mbits/sec 0 489 KBytes
[ 5] 2.00-3.00 sec 35.4 MBytes 297 Mbits/sec 0 489 KBytes
[ 5] 3.00-4.00 sec 36.8 MBytes 308 Mbits/sec 0 489 KBytes
[ 5] 4.00-5.00 sec 35.2 MBytes 295 Mbits/sec 0 489 KBytes
[ 5] 5.00-6.00 sec 38.4 MBytes 322 Mbits/sec 0 489 KBytes
[ 5] 6.00-7.00 sec 34.4 MBytes 288 Mbits/sec 0 489 KBytes
[ 5] 7.00-8.00 sec 29.6 MBytes 248 Mbits/sec 0 489 KBytes
[ 5] 8.00-9.00 sec 31.1 MBytes 261 Mbits/sec 0 489 KBytes
[ 5] 9.00-10.01 sec 32.5 MBytes 272 Mbits/sec 0 489 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 326 MBytes 273 Mbits/sec 45 sender
[ 5] 0.00-10.02 sec 324 MBytes 271 Mbits/sec receiver
iperf Done.
Speedtest to WAN from a cell phone
nss_diag
MODEL: Dynalink DL-WRX36
OPENWRT: r28556-a1bbf959ea
IPQ BRANCH: main_nss
IPQ COMMIT: a1bbf959ea
IPQ DATE: 2024-12-28
NSS FW: NSS.FW.12.2-161-HK.R
MAC80211: v6.12.6-0-ge9d65b48ce1a
ATH11K FW: WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
INTERFACE: br-lan tx-checksumming: on rx-gro-list: off
lan1 tx-checksumming: on rx-gro-list: off
lan2 tx-checksumming: on rx-gro-list: off
lan3 tx-checksumming: on rx-gro-list: off
lan4 tx-checksumming: on rx-gro-list: off
phy0-ap0 tx-checksumming: on rx-gro-list: off
phy1-ap0 tx-checksumming: on rx-gro-list: off
phy2-ap0 tx-checksumming: on rx-gro-list: off
wan tx-checksumming: on rx-gro-list: off
NSS PKGS: kmod-qca-mcs-6.6.67.12.5.2024.02.27~26d6424-r1 aarch64_cortex-a53 {feeds/nss_packages/qca-mcs} () [installed]
kmod-qca-nss-dp-6.6.67.2024.04.16~5bf8b91e-r1 aarch64_cortex-a53 {feeds/base/kernel/qca-nss-dp} () [installed]
kmod-qca-nss-drv-6.6.67.12.5.2024.04.06~53a0dc1-r15 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-drv} () [installed]
kmod-qca-nss-drv-bridge-mgr-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-gre-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-igs-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-lag-mgr-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-map-t-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-pppoe-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-pptp-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-qdisc-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-tun6rd-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-drv-vlan-mgr-6.6.67.12.5.2024.06.12~1bcef16-r7 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-clients} () [installed]
kmod-qca-nss-ecm-6.6.67.12.5.5.2024.09.02~bd5057b-r3 aarch64_cortex-a53 {feeds/nss_packages/qca-nss-ecm} () [installed]
kmod-qca-ssdk-6.6.67.2024.06.13~c451136b-r3 aarch64_cortex-a53 {feeds/base/kernel/qca-ssdk} () [installed]
nss-firmware-default-2024.08.04~794fe373-r1 aarch64_cortex-a53 {feeds/nss_packages/firmware/nss-firmware} () [installed]
nss-firmware-ipq8074-2024.08.04~794fe373-r1 aarch64_cortex-a53 {feeds/nss_packages/firmware/nss-firmware} () [installed]
1 Like
How do I find which commit I'm using after building a firmware? Also how come some firmwares comes with apk and some come with opkg?
I'm building my firmwares based off Qosmio repo.
Update: never mind I found the build info right at the landing page
No, STA/client mode fails with both NSS firmware 11.4 and 12.2.
AW1000 Reboot Loop Issue with QMI Connection
My device is an AW1000, and I built the firmware using the latest code from the main-nss branch of the Qosmio project.
I then used the FUjr_modem_feeds project to drive my 5G module.
However, it seems that once the wwan0 connection is established, a kernel panic occurs, causing the device to loop in this state. When I switch the dialing mode to MBIM, this issue does not occur, but of course, there is no NSS support in that case.
The specific kernel log is as follows:
Jumping to AARCH64 kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.6.69 (pzwa@DESKTOP-59H6TLG) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r0-32b3eb8) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sun Jan 5 23:52:47 2025
[ 0.000000] Machine model: Arcadyan AW1000
....
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 19 pages/cpu s37800 r8192 d31832 u77824
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 pcie_dev=RG50 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1
[ 0.000000] Unknown kernel command line parameters "pcie_dev=RG50", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x000000007eb00000-0x000000007ec00000] (1MB)
[ 0.000000] Memory: 883480K/1048576K available (8704K kernel code, 1012K rwdata, 2716K rodata, 1792K init, 280K bss, 165096K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000478] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000491] pid_max: default: 32768 minimum: 301
[ 0.005497] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.005511] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.009785] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.010055] rcu: Hierarchical SRCU implementation.
[ 0.010060] rcu: Max phase no-delay instances is 1000.
[ 0.011230] smp: Bringing up secondary CPUs ...
[ 0.011899] Detected VIPT I-cache on CPU1
[ 0.012004] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.012719] Detected VIPT I-cache on CPU2
[ 0.012791] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.013470] Detected VIPT I-cache on CPU3
[ 0.013535] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.013605] smp: Brought up 1 node, 4 CPUs
[ 0.013614] SMP: Total of 4 processors activated.
[ 0.013619] CPU features: detected: 32-bit EL0 Support
[ 0.013624] CPU features: detected: CRC32 instructions
[ 0.013686] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.013692] CPU: All CPU(s) started at EL1
[ 0.013696] alternatives: applying system-wide alternatives
[ 0.025748] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.025774] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.027510] pinctrl core: initialized pinctrl subsystem
[ 0.029550] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.030211] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.030255] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.030289] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.030713] thermal_sys: Registered thermal governor 'step_wise'
[ 0.030772] cpuidle: using governor menu
[ 0.030988] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.031077] ASID allocator initialised with 65536 entries
[ 0.095078] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.099146] Modules: 29104 pages in range for non-PLT usage
[ 0.099156] Modules: 520624 pages in range for PLT usage
[ 0.103933] SCSI subsystem initialized
[ 0.104146] usbcore: registered new interface driver usbfs
[ 0.104183] usbcore: registered new interface driver hub
[ 0.104242] usbcore: registered new device driver usb
[ 0.104771] qcom_scm: convention: smc arm 64
[ 0.106578] clocksource: Switched to clocksource arch_sys_counter
[ 0.110364] NET: Registered PF_INET protocol family
[ 0.110519] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.113145] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.113168] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.113184] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.113270] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.113542] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.114043] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[ 0.114240] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.114278] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.114707] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.114759] PCI: CLS 0 bytes, default 64
[ 0.116623] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.117419] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.117427] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.124034] qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dummy regulator
[ 0.124207] qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dummy regulator
[ 0.125741] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
[ 0.125881] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
[ 0.127934] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator
[ 0.128051] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.128225] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
[ 0.128532] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
[ 0.128653] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
[ 0.128739] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.128935] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[ 0.131324] gpio-export gpio-export: 3 gpio(s) exported
[ 0.140318] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.141397] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.141437] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.141782] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 20, base_baud = 230400) is a MSM
[ 0.141816] msm_serial: console setup on port #0
[ 0.141859] printk: console [ttyMSM0] enabled
[ 0.998533] msm_serial: driver initialized
[ 1.007853] loop: module loaded
[ 1.009090] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa3
[ 1.009813] nand: Toshiba TH58NYG3S0HBAI4 8G 1.8V 8-bit
[ 1.016405] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256
[ 1.022689] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 1.088156] i2c_dev: i2c /dev entries driver
[ 1.094799] sdhci: Secure Digital Host Controller Interface driver
[ 1.094844] sdhci: Copyright(c) Pierre Ossman
[ 1.099910] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.106363] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[ 1.112139] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.118688] NET: Registered PF_INET6 protocol family
[ 1.125231] Segment Routing with IPv6
[ 1.129124] In-situ OAM (IOAM) with IPv6
[ 1.132697] NET: Registered PF_PACKET protocol family
[ 1.136685] Bridge firewalling registered
[ 1.141847] 8021q: 802.1Q VLAN Support v1.8
[ 1.177891] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 1.178211] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 1.184017] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 1.190677] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 1.198312] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 1.205790] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 1.214947] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
[ 1.221895] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 824000 uV
[ 1.231877] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 896000 uV
[ 1.241692] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 984000 uV
[ 1.251549] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 694, quot_offset[ 7]= 0
[ 1.261308] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 921, quot_offset[ 7]= 225
[ 1.272157] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1043, quot_offset[ 7]= 120
[ 1.283096] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1200, quot_offset[ 7]= 155
[ 1.294350] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 1.296942] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa3
[ 1.311724] nand: Toshiba TH58NYG3S0HBAI4 8G 1.8V 8-bit
[ 1.318135] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256
[ 1.323494] 26 qcomsmem partitions found on MTD device qcom_nand.0
[ 1.331084] Creating 26 MTD partitions on "qcom_nand.0":
[ 1.337108] 0x000000000000-0x000000100000 : "0:sbl1"
[ 1.343535] 0x000000100000-0x000000200000 : "0:mibib"
[ 1.348400] 0x000000200000-0x000000280000 : "0:bootconfig"
[ 1.353123] 0x000000280000-0x000000300000 : "0:bootconfig1"
[ 1.358543] 0x000000600000-0x000000900000 : "0:qsee"
[ 1.364993] 0x000000300000-0x000000600000 : "0:qsee_1"
[ 1.370274] 0x000000980000-0x000000a00000 : "0:devcfg"
[ 1.374169] 0x000000900000-0x000000980000 : "0:devcfg_1"
[ 1.379321] 0x000000a00000-0x000000a80000 : "0:apdp"
[ 1.384737] 0x000000a80000-0x000000b00000 : "0:apdp_1"
[ 1.389752] 0x000000b80000-0x000000c00000 : "0:rpm"
[ 1.394662] 0x000000b00000-0x000000b80000 : "0:rpm_1"
[ 1.399466] 0x000000c80000-0x000000d00000 : "0:cdt"
[ 1.404637] 0x000000c00000-0x000000c80000 : "0:cdt_1"
[ 1.409403] 0x000000d00000-0x000000d80000 : "0:appsblenv"
[ 1.414530] 0x000000e80000-0x000000f80000 : "0:appsbl"
[ 1.420196] 0x000000d80000-0x000000e80000 : "0:appsbl_1"
[ 1.425195] 0x000000f80000-0x000001000000 : "0:art"
[ 1.430486] 0x000008c80000-0x00000f080000 : "rootfs"
[ 1.476424] mtd: setting mtd18 (rootfs) as root device
[ 1.476965] mtdsplit: no squashfs found in "rootfs"
[ 1.480505] 0x00000f080000-0x000010900000 : "0:wififw"
[ 1.496040] 0x000001000000-0x000007400000 : "rootfs_1"
[ 1.538210] 0x000007400000-0x000008c80000 : "0:wififw_1"
[ 1.548988] 0x000010900000-0x000010b40000 : "0:ethphyfw"
[ 1.550511] 0x000010b40000-0x000010c40000 : "0:board_data"
[ 1.554310] 0x000010c40000-0x000011440000 : "0:arc_datadump"
[ 1.562605] 0x000011440000-0x00003e000000 : "0:arc_data"
[ 1.874146] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
[ 1.876088] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[ 1.884171] ubi0: attaching mtd18
[ 2.297724] ubi0: scanning is finished
[ 2.304207] ubi0: attached mtd18 (name "rootfs", size 100 MiB)
[ 2.304247] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[ 2.308961] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[ 2.315797] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
[ 2.322662] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
[ 2.329436] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 2.335677] ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1735394091
[ 2.342720] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 80
[ 2.352009] ubi0: background thread "ubi_bgt0d" started, PID 666
[ 2.352927] block ubiblock0_1: created from ubi0:1(ro 2.376711] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.377324] Freeing unused kernel memory: 1792K
[ 2.382966] Run /sbin/init as init process
[ 2.496604] random: crng init done
[ 2.529216] init: Console is alive
[ 2.529339] init: - watchdog -
[ 3.365473] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.400025] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 3.403760] ramoops: found existing invalid buffer, size 37748736, start 0
[ 3.405801] ramoops: found existing invalid buffer, size 4194304, start 0
[ 3.412708] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.419534] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.426289] ramoops: found existing invalid buffer, size 37748736, start 0
[ 3.433149] ramoops: found existing invalid buffer, size 4194304, start 0
[ 3.440006] ramoops: found existing invalid buffer, size 37748736, start 0
[ 3.446870] ramoops: found existing invalid buffer, size 37748736, start 0
[ 3.453640] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.460496] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.467363] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.474202] ramoops: found existing invalid buffer, size 4194304, start 0
[ 3.481066] ramoops: found existing invalid buffer, size 37748736, start 0
[ 3.487933] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.494698] ramoops: found existing invalid buffer, size 37748736, start 0
[ 3.501559] ramoops: found existing invalid buffer, size 37748736, start 0
[ 3.508408] ramoops: found existing invalid buffer, size 4194304, start 0
[ 3.515262] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.522128] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.528898] ramoops: found existing invalid buffer, size 4194304, start 0
[ 3.535748] ramoops: found existing invalid buffer, size 4194304, start 0
[ 3.542609] ramoops: found existing invalid buffer, size 37748736, start 1048576
[ 3.549385] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.556875] ramoops: found existing invalid buffer, size 33554432, start 0
[ 3.563536] ramoops: found existing invalid buffer, size 33570804, start 9929
[ 3.570437] pstore: Using crash dump compression: deflate
[ 3.577700] printk: console [ramoops-1] enabled
[ 3.583465] pstore: Registered ramoops as persistent store backend
[ 3.587313] ramoops: using 0x100000@0x51200000, ecc: 0
[ 3.626241] ssdk_dt_parse_interrupt[941]:INFO:intr-gpio does not exist
[ 4.746653] regi_init[2525]:INFO:Initializing HPPE Done!!
[ 4.746782] regi_init[2574]:INFO:qca-ssdk module init succeeded!
[ 4.753669] EDMA ver 1 hw init
[ 4.757378] EDMA HW Reset completed succesfully
[ 4.760015] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[ 4.764409] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 4.770021] dp1: ppe offload disabled: 0 for macid 1
[ 4.773785] dp1: Switch attached to macid 1 status: 0
[ 4.977378] Qualcomm QCA8075 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
[ 4.978355] dp2: ppe offload disabled: 0 for macid 2
[ 4.986279] dp2: Switch attached to macid 2 status: 0
[ 5.066942] Qualcomm QCA8075 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
[ 5.067914] dp3: ppe offload disabled: 0 for macid 3
[ 5.075841] dp3: Switch attached to macid 3 status: 0
[ 5.156946] Qualcomm QCA8075 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
[ 5.157840] dp4: ppe offload disabled: 0 for macid 4
[ 5.165844] dp4: Switch attached to macid 4 status: 0
[ 5.246939] Qualcomm QCA8075 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
[ 5.247798] dp6-syn: ppe offload disabled: 0 for macid 6
[ 5.255838] dp6-syn: Switch attached to macid 6 status: 0
[ 5.358565] Qualcomm QCA8081 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL)
[ 5.359419] **********************************************************
[ 5.367486] * NSS Data Plane driver
[ 5.373965] **********************************************************
[ 5.399676] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.399732] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 5.404195] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010
[ 5.411676] xhci-hcd xhci-hcd.1.auto: irq 41, io mem 0x08a00000
[ 5.421091] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 5.426900] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 5.432452] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 5.440432] hub 1-0:1.0: USB hub found
[ 5.446627] hub 1-0:1.0: 1 port detected
[ 5.450566] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.454726] hub 2-0:1.0: USB hub found
[ 5.462661] hub 2-0:1.0: 1 port detected
[ 5.466411] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 5.470155] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[ 5.475538] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002000010
[ 5.483056] xhci-hcd xhci-hcd.2.auto: irq 42, io mem 0x08c00000
[ 5.492458] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 5.498257] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[ 5.503809] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[ 5.511702] hub 3-0:1.0: USB hub found
[ 5.517979] hub 3-0:1.0: 1 port detected
[ 5.521946] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.526105] hub 4-0:1.0: USB hub found
[ 5.533891] hub 4-0:1.0: 1 port detected
[ 5.540215] usbcore: registered new interface driver usb-storage
[ 5.541762] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.557846] init: - preinit -
Cannot parse config file '/etc/fw_env.config': No such file or directory
Failed to find NVMEM device
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 10.169566] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 10.169699] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 967
[ 10.234354] UBIFS (ubi0:2): recovery needed
[ 10.358564] UBIFS (ubi0:2): recovery completed
[ 10.358720] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 10.361922] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[ 10.369841] UBIFS (ubi0:2): FS size: 55107584 bytes (52 MiB, 217 LEBs), max 227 LEBs, journal size 2793472 bytes (2 MiB, 11 LEBs)
[ 10.379733] UBIFS (ubi0:2): reserved for root: 2602867 bytes (2541 KiB)
[ 10.391357] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 96373E25-14D3-409E-A416-113D2DF28647, small LPT model
[ 10.404696] mount_root: switching to ubifs overlay
[ 10.415005] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 10.422730] urandom-seed: Seeding with /etc/urandom.seed
[ 10.483594] procd: - early -
[ 10.483712] procd: - watchdog -
sh: out of range
net_devices: tty_devices:
[ 10.966726] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 11.649037] procd: - watchdog -
[ 11.649310] procd: - ubus -
[ 11.806188] procd: - init -
Please press Enter to activate this console.
[ 12.180709] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.274901] l2tp_core: L2TP core driver, V2.0
[ 12.275719] l2tp_netlink: L2TP netlink interface
[ 12.296407] urngd: v1.0.2 started.
[ 12.391208] qca-nss 39000000.nss: NSS FW Version: NSS.HK.11.4.0.5-6-R
[ 12.391256] qca-nss 39000000.nss: fw of size 835960 bytes copied to addr: 40000000, nss_id: 0
[ 12.398265]
[ 12.439513] qca-nss 39000000.nss: NSS core 0 booted successfully
[ 12.548536] qca-nss 39400000.nss: fw of size 292296 bytes copied to addr: 40800000, nss_id: 1
[ 12.549502]
[ 12.560648] qca-nss 39400000.nss: NSS core 1 booted successfully
[ 12.561971] gre: GRE over IPv4 demultiplexor driver
[ 12.566856] ip_gre: GRE over IPv4 tunneling driver
[ 12.573986] QCA multicast snooping installed successfully
[ 12.576784] usbcore: registered new interface driver cdc_wdm
[ 12.581550] rmnet_nss_init(): initializing rmnet_nss
[ 12.615809] qmi_wwan_q 4-1:1.4: cdc-wdm0: USB WDM device
[ 12.616083] qmi_wwan_q 4-1:1.4: Quectel RG500Q-EA work on RawIP mode
[ 12.621837] qmi_wwan_q 4-1:1.4: rx_urb_size = 31744
[ 12.627106] qmi_wwan_q 4-1:1.4 wwan0: register 'qmi_wwan_q' at usb-xhci-hcd.2.auto-1, RMNET/USB device, d2:98:d3:17:8d:6e
[ 12.823116] net wwan0 wwan0_1: NSS context created
[ 12.823166] net wwan0: qmap_register_device wwan0_1
[ 12.827058] usbcore: registered new interface driver qmi_wwan_q
[ 12.853860] GACT probability on
[ 12.854705] Mirror/redirect action on
[ 12.861674] u32 classifier
[ 12.861712] input device check on
[ 12.863337] Actions configured
[ 12.874976] ntfs3: Enabled Linux POSIX ACLs support
[ 12.879184] mhi_init Quectel_Linux_PCIE_MHI_Driver_V1.3.6
[ 12.890922] usbcore: registered new interface driver cdc_acm
[ 12.890971] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 12.896766] usbcore: registered new interface driver cdc_ether
[ 12.904667] usbcore: registered new interface driver cdc_ncm
[ 12.910149] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[ 12.915223] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[ 12.924068] usbcore: registered new interface driver huawei_cdc_ncm
[ 12.938747] usbcore: registered new interface driver qmi_wwan
[ 12.939813] NET: Registered PF_QIPCRTR protocol family
[ 12.945083] usbcore: registered new interface driver rndis_host
[ 12.953980] usbcore: registered new interface driver usbserial_generic
[ 12.954390] usbserial: USB Serial support registered for generic
[ 12.970292] xt_time: kernel timezone is -0000
[ 12.971092] usbcore: registered new interface driver cdc_mbim
[ 13.058258] PPP generic driver version 2.4.2
[ 13.059295] NET: Registered PF_PPPOX protocol family
[ 13.062705] PPTP driver version 0.8.5
[ 13.069761] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 13.070117] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 13.087971] ath11k c000000.wifi: ipq8074 hw2.0
[ 13.088012] ath11k c000000.wifi: FW memory mode: 0
[ 16.605255] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 16.605758] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 17.730809] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 17.782249] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0x270 soc_id 0xffffffff
[ 17.782306] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 22.884280] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss
[ 22.884329] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 22.890496] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 23.240908] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 23.245644] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 23.249649] usbcore: registered new interface driver option
[ 23.252032] usbserial: USB Serial support registered for GSM modem (1-port)
[ 23.257643] option 4-1:1.0: GSM modem (1-port) converter detected
[ 23.264564] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 23.270894] option 4-1:1.1: GSM modem (1-port) converter detected
[ 23.277711] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 23.283724] option 4-1:1.2: GSM modem (1-port) converter detected
[ 23.290556] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 23.292378] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0x270 soc_id 0xffffffff
[ 23.296541] option 4-1:1.3: GSM modem (1-port) converter detected
[ 23.303158] ath11k c000000.wifi: fw_version 0x290b84a5 fw_build_timestamp 2024-09-23 11:32 fw_build_id WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
[ 23.317968] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB3
[ 23.337138] usbcore: registered new interface driver qcserial
[ 23.337558] usbserial: USB Serial support registered for Qualcomm USB modem
[ 23.343844] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 23.596941] ath11k c000000.wifi: htt event 48 not handled
[ 23.623917] ath11k c000000.wifi: nss init soc nss if_num 203 userpd_id 0
[ 25.744983] ECM init: selected_front_end=1
[ 25.745064] ECM database jhash random seed: 0x16c38d66
[ 25.866923] ECM init complete
[ 25.873165] br-lan: port 1(lan1) entered blocking state
[ 25.873221] br-lan: port 1(lan1) entered disabled state
[ 25.877292] nss-dp 3a001000.dp1 lan1: entered allmulticast mode
[ 25.882901] nss-dp 3a001000.dp1 lan1: entered promiscuous mode
[ 25.898646] br-lan: port 2(lan2) entered blocking state
[ 25.898702] br-lan: port 2(lan2) entered disabled state
[ 25.902735] nss-dp 3a001200.dp2 lan2: entered allmulticast mode
[ 25.908695] nss-dp 3a001200.dp2 lan2: entered promiscuous mode
[ 25.918545] br-lan: port 3(lan3) entered blocking state
[ 25.919720] br-lan: port 3(lan3) entered disabled state
[ 25.924872] nss-dp 3a001400.dp3 lan3: entered allmulticast mode
[ 25.930469] nss-dp 3a001400.dp3 lan3: entered promiscuous mode
[ 25.940764] br-lan: port 4(lan4) entered blocking state
[ 25.941854] br-lan: port 4(lan4) entered disabled state
[ 25.947086] nss-dp 3a001600.dp4 lan4: entered allmulticast mode
[ 25.952745] nss-dp 3a001600.dp4 lan4: entered promiscuous mode
[ 28.197386] qca-nss 39000000.nss: Configuring additional NSS pbufs
[ 28.227243] qca-nss 39000000.nss: Additional pbufs of size 10002432 got added to NSS
[ 29.047635] nss-dp 3a001600.dp4 lan4: PHY Link up speed: 1000
[ 29.047815] br-lan: port 4(lan4) entered blocking state
[ 29.052403] br-lan: port 4(lan4) entered forwarding state
[ 30.087083] nss-dp 3a007000.dp6-syn wan: PHY Link up speed: 2500
[ 32.486611] l11: disabling
[ 37.768306] net wwan0: ul_data_aggregation_max_datagrams=11, ul_data_aggregation_max_size=4096, dl_minimum_padding=0
[ 38.888398] net wwan0: link_state 0x0 -> 0x1
[ 39.053494] NSS core 1 signal COREDUMP COMPLETE 4000
[ 39.053540] ffffffc079225b00: Starting NSS-FW logbuffer dump for core 1
[ 39.057543] ffffffc079225b00: Warn: trap[813]: Trap on CHIP ID 00050002
[ 39.063868] ffffffc079225b00: Warn: trap[620]: Trapped: TRAP_TD(00000004) DCAPT(3C000080)
[ 39.070476] ffffffc079225b00: Warn: trap[645]: Trapped: Thread: 2, reason: 00001000, PC: 3F002140, previous PC: 3F00213C
[ 39.078813] ffffffc079225b00: Warn: trap[594]: A0_3: 3F01FCF4 3F02F4FC 3F01FDCC 00000000
[ 39.089745] ffffffc079225b00: Warn: trap[594]: A4_7: 3F01FCEC 3F000400 3F01FCCC 3F008F8C
[ 39.097818] ffffffc079225b00: Warn: trap[599]: D0_3: 3F02F4FC 00000000 00000000 00008000
[ 39.105886] ffffffc079225b00: Warn: trap[599]: D4_7: 00000000 00000000 00000000 00000000
[ 39.113964] ffffffc079225b00: Warn: trap[599]: D8_11: 00000000 00000000 00000000 00000000
[ 39.122037] ffffffc079225b00: Warn: trap[599]: D12_15: 00000000 00000000 00000000 00000000
[ 39.130110] ffffffc079225b00: Warn: trap[649]: Thread_2 has non-recoverable trap
[ 39.141341] NSS core 0 signal COREDUMP COMPLETE 4000
[ 39.145813] ffffffc07921e280: Starting NSS-FW logbuffer dump for core 0
[ 39.150771] Kernel panic - not syncing: NSS FW coredump: bringing system down
[ 39.157101] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.6.69 #0
[ 39.164391] Hardware name: Arcadyan AW1000 (DT)
[ 39.171851] Call trace:
[ 39.176100] dump_backtrace+0xb0/0x114
[ 39.178533] show_stack+0x18/0x24
[ 39.182351] dump_stack_lvl+0x48/0x60
[ 39.185738] dump_stack+0x18/0x24
[ 39.189382] panic+0x2cc/0x320
[ 39.192680] nss_fw_coredump_notify+0x200/0x4a4 [qca_nss_drv]
[ 39.195638] nss_core_handle_napi_emergency+0x38/0x4c [qca_nss_drv]
[ 39.201453] __napi_poll+0x38/0x178
[ 39.207526] net_rx_action+0x14c/0x2d0
[ 39.210998] handle_softirqs+0xfc/0x230
[ 39.214817] __do_softirq+0x14/0x20
[ 39.218549] ____do_softirq+0x10/0x1c
[ 39.222022] call_on_irq_stack+0x24/0x4c
[ 39.225842] do_softirq_own_stack+0x1c/0x28
[ 39.229835] irq_exit_rcu+0x90/0xc8
[ 39.233740] el1_interrupt+0x38/0x54
[ 39.237214] el1h_64_irq_handler+0x18/0x24
[ 39.241034] el1h_64_irq+0x68/0x6c
[ 39.244938] default_idle_call+0x28/0x3c
[ 39.248325] do_idle+0x1cc/0x1ec
[ 39.252403] cpu_startup_entry+0x38/0x3c
[ 39.255616] kernel_init+0x0/0x1e0
[ 39.259521] arch_post_acpi_subsys_init+0x0/0x8
[ 39.262735] start_kernel+0x514/0x648
[ 39.267162] __primary_switched+0xb4/0xbc
[ 39.270983] SMP: stopping secondary CPUs
[ 39.274980] Kernel Offset: disabled
[ 39.278966] CPU features: 0x0,00000000,00000000,0000400b
[ 39.282182] Memory Limit: none
[ 39.491091] pstore: backend (ramoops) writing error (-28)
[ 39.491117] Rebooting in 3 seconds..
Hi @AgustinLorenzo - does your builds supports mesh?
Hello Agustin, thanks for your build. Could you also add Linksys MX5300? This is a higher-tier version of MX4200 and many people including me got a very good deal recently.
I have the same issue on main-nss, also with ath11k_pci
Just a warning to anyone who may decide to use the new experimental wifi-scripts: add ucode based scripts.
Radio0 (5GHz) doesn't start on my NSS build.
Radio1 (2.4GHz) works.
daemon.notice netifd: radio0 (17956): wifi-scripts: Tearing down phy0
daemon.notice hostapd: Set new config for phy phy0:
daemon.notice wpa_supplicant[2884]: Set new config for phy phy0
daemon.notice netifd: Wireless device 'radio0' is now down
daemon.notice netifd: radio0 (17971): wifi-scripts: Starting
daemon.notice hostapd: Set new config for phy phy0:
daemon.notice wpa_supplicant[2884]: Set new config for phy phy0
daemon.notice netifd: radio0 (17971): command failed: Not supported (-95)
daemon.notice hostapd: Set new config for phy phy0: /var/run/hostapd-phy0.conf
daemon.notice hostapd: Restart interface for phy phy0
daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=US ieee80211h=1 ieee80211d=1 spectrum_mgmt_required=0 beacon_int=100 noscan=1 airtime_mode=0 rssi_reject_assoc_rssi=0 rssi_ignore_probe_request=0 acs_exclude_dfs=0 enable_background_radar=1 min_tx_power=0 hw_mode=a ieee80211n=1 ht_coex=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][MAX-AMSDU-7935][DSSS_CCK-40][RX-STBC1] ieee80211ac=1 vht_oper_chwidth=2 vht_oper_centr_freq_seg0_idx=0 vht_capab=[RXLDPC][SHORT-GI-160][TX-STBC-2BY1][SU-BEAMFORMER][SU-BEAMFORMEE][MU-BEAMFORMER][MU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC1][SOUNDING-DIMENSION-4][BF-ANTENNA-4][MAX-MPDU-7991] he_bss_color=128 he_spr_sr_control=3 ieee80211ax=1 he_oper_chwidth=2 he_oper_centr_freq_seg0_idx=0 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_twt_required=0 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=
kern.info kernel: [ 241.633470] ath11k c000000.wifi phy0-ap0: entered allmulticast mode
daemon.notice hostapd: phy0-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
daemon.err hostapd: Interface initialization failed
daemon.notice hostapd: phy0-ap0: interface state COUNTRY_UPDATE->DISABLED
daemon.notice hostapd: phy0-ap0: AP-DISABLED
daemon.err hostapd: phy0-ap0: Unable to setup interface.
daemon.notice hostapd: nl80211: deinit ifname=phy0-ap0 disabled_11b_rates=0
kern.info kernel: [ 241.639271] ath11k c000000.wifi phy0-ap0: entered promiscuous mode
user.notice root: [ethtool] Disabling feature: rx-gro-list: disabled on (phy0-ap0)
kern.info kernel: [ 241.689270] ath11k c000000.wifi phy0-ap0: left allmulticast mode
kern.info kernel: [ 241.689329] ath11k c000000.wifi phy0-ap0: left promiscuous mode
kern.info kernel: [ 241.694472] br-lan: port 6(phy0-ap0) entered disabled state
daemon.err hostapd: rmdir[ctrl_interface=/var/run/hostapd]: Permission denied
daemon.notice hostapd: phy0-ap0: CTRL-EVENT-TERMINATING
daemon.err hostapd: hostapd_free_hapd_data: Interface phy0-ap0 wasn't started
daemon.notice hostapd: hostapd.add_iface failed for phy phy0 ifname=phy0-ap0
daemon.notice netifd: Wireless device 'radio0' is now up
daemon.notice netifd: radio0 (17971): wifi-scripts: Configuring 'phy0' txantenna: 4294967295, rxantenna: 4294967295 distance: 0
daemon.notice netifd: radio0 (17971): wifi-scripts: network is not present in the schema
daemon.notice netifd: radio0 (17971): wifi-scripts: Preparing interface: phy0-ap0 with MAC: null
@rmandrad I saw this issue that was closed as resolved. Did you try it with your NSS build?
Hi @zzz1322,
For the next version I will add MX4300 and MX5300 
Regards, Agustin
FYI: I am redoing the repos
3 Likes
Hi, my issue is gone after I change the init scripts, you may check my later post for details
1 Like
@sppmaster no I haven't tried on qualcommax. That issue was resolved ... there were a few fixes for it but since then i haven't tried it.
1 Like
Hi boys,
This version include NSS offload for WiFi
I am redo the repos over the latest commit from OpenWRT.
Changelog (include upstream of OpenWRT):
- Updated kernel and NSS software to version 6.6.69.
- Updated hostapd to version “2025-01-01”, for more info: https://github.com/openwrt/openwrt/pull/17423
- Increased UDP packet timeout to correct erratic behavior of HTTP3 protocol, for more info: https://github.com/openwrt/openwrt/pull/17334
- Added the following devices to the build: Linksys MX4300 and Linksys MX5300. @zzz1322 @wmd @dandelionclock
- WARNING: Remember that the following services are disabled at first startup: mwan3, sqm, mesh11sd (only mesh build) you have to re-enable them from: Luci -> System -> Startup.
Notes:
- Compilation is performed with the following limits for ath11k (512M) and NSS (NSS_MEM_PROFILE_HIGH) and pbuf set to auto by default.
- The build is compiled with GCC 13.3.
- The default TCP congestion protocol is CUBIC.
- By default, the radio0 (IoT) is off (you can enable in LUCI) and the radio 1 (2.4 GHz) y 2 (5 GHz) is on.
- The default country code for the WiFi is USA to avoid problems with 160 MHZ because it does not work if it does not have a specified country code.
- I have posted on my Github all the workarounds used in this build: https://github.com/AgustinLorenzo/openwrt/issues/5 (english) and https://github.com/AgustinLorenzo/openwrt/issues/6 (spanish)
- Guide to upgrade to kernel 6.6 without losing your configuration: https://github.com/AgustinLorenzo/openwrt/issues/9 (english) and https://github.com/AgustinLorenzo/openwrt/issues/8 (spanish)
Sources:
- Normal build: https://github.com/AgustinLorenzo/openwrt/tree/main_nss
- Mesh build: https://github.com/AgustinLorenzo/openwrt/tree/main_nss_mesh
- NSS packages: https://github.com/AgustinLorenzo/nss-packages/commits/main_nss_wifi/
BUILDED (NORMAL): https://github.com/AgustinLorenzo/openwrt/releases/tag/ipq807x-nsswifi-2025-01-09-1946
BUILDED (MESH BUILD): https://github.com/AgustinLorenzo/openwrt/releases/tag/ipq807x-nsswifi-mesh-2025-01-09-2158
NOTE: Now I only compile the build for the following devices AX3600, AX6, AX9000, Dynalink DL-WRX36, Buffalo WXR-5950AX12, QNAP QHora-301W, Netgear RAX120v2, Arcadyan AW1000, Zyxel NBG7815, Linksys MX4200 (v1 and v2), Netgear SXR80, Netgear SXS80, Spectrum SAX1V1K and Netgear WAX218, Linksys MX4300 and Linksys MX5300 if someone has used my versions with other devices (and it is supported), let me know and I will add it.
11 Likes
I haven't tried meshing with NSS firmware but in plain OpenWrt, I previously use GRETAP tunnel for multiple VLANs with mesh. Here is a video tutorial: https://www.youtube.com/watch?v=WIKwOPwtTJU
@AgustinLorenzo In this build LUCI is showing opkg for software instead of APK
thanks for the Mx5300 build @AgustinLorenzo
Hi boys,
I have prepared a new build (BETA) removing the “preemptive kernel” mode because according to what I have been reading for VPNs (wireguard) running from the router, the performance could be affected.
BUILD (NORMAL): https://github.com/AgustinLorenzo/openwrt/releases/tag/ipq807x-nsswifi-2025-01-12-2031
In addition to the above change, the kernel was updated to version 6.6.71.
If someone can do some tests and tell us about it.
Link: https://github.com/openwrt/openwrt/issues/17454
Regards, Agustin
Can you please elaborate on this, what exactly these limitations do? I have been compiling my own builds, but I am noticing memory leaks, to the point that available memory goes down almost to 0 and router reboots.