Qualcommax NSS Build

Hi @AgustinLorenzo , I was able to compile a version for CR1000A based on your code, everything works great and I got hardware offload tested fine, iperf was reaching 5Gigs from PC->router.(Should be able to reach 10G with pc->pc, but I don't have second 10G pc for testing). There is only one thing I noticed that when I have WAN connected, every time I start running speedtest, the router will reboot, but with WAN disconnected, it runs fine on all test. Any help would be appreciated.

Attached panic log when it reboots:


[    0.067422] TCP established hash table entries: 16384 (order: 5, 131072 bytes                                                                              , linear)
[    0.067583] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linea                                                                              r)
[    0.068114] TCP: Hash tables configured (established 16384 bind 16384)
[    0.068227] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.068291] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.068529] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.068565] PCI: CLS 0 bytes, default 64
[    0.069882] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.074700] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.074712] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT                                                                              Y) (c) 2001-2006 Red Hat, Inc.
[    0.079409] qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dumm                                                                              y regulator
[    0.079612] qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dumm                                                                              y regulator
[    0.080388] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dumm                                                                              y regulator
[    0.080505] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dumm                                                                              y regulator
[    0.081653] qcom-qusb2-phy 59000.phy: supply vdd not found, using dummy regul                                                                              ator
[    0.081771] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy                                                                               regulator
[    0.081855] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using d                                                                              ummy regulator
[    0.082039] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
[    0.082228] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regul                                                                              ator
[    0.082334] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy                                                                               regulator
[    0.082374] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using d                                                                              ummy regulator
[    0.082524] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[    0.085117] qcom-pcie 10000000.pci: host bridge /soc/pci@10000000 ranges:
[    0.085168] qcom-pcie 10000000.pci:       IO 0x0010200000..0x001020ffff -> 0x                                                                              0000000000
[    0.085194] qcom-pcie 10000000.pci:      MEM 0x0010220000..0x001fffffff -> 0x                                                                              0010220000
[    0.144431] qcom-pcie 10000000.pci: Read DBI address failed
[    0.255465] qcom-pcie 10000000.pci: iATU unroll: disabled
[    0.255474] qcom-pcie 10000000.pci: iATU regions: 32 ob, 8 ib, align 4K, limi                                                                              t 4G
[    1.255698] qcom-pcie 10000000.pci: Phy link never came up
[    1.255891] qcom-pcie 10000000.pci: PCI host bridge to bus 0001:00
[    1.255903] pci_bus 0001:00: root bus resource [bus 00-ff]
[    1.255915] pci_bus 0001:00: root bus resource [io  0x0000-0xffff]
[    1.255924] pci_bus 0001:00: root bus resource [mem 0x10220000-0x1fffffff]
[    1.255962] pci 0001:00:00.0: [17cb:0302] type 01 class 0x060400
[    1.255985] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    1.256059] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    1.259467] pci 0001:00:00.0: BAR 0: assigned [mem 0x10220000-0x10220fff]
[    1.259488] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    1.261662] pcieport 0001:00:00.0: PME: Signaling with IRQ 16
[    1.261944] pcieport 0001:00:00.0: AER: enabled with IRQ 16
[    1.262707] qcom-pcie 20000000.pci: host bridge /soc/pci@20000000 ranges:
[    1.262754] qcom-pcie 20000000.pci:       IO 0x0020200000..0x002020ffff -> 0x                                                                              0000000000
[    1.262779] qcom-pcie 20000000.pci:      MEM 0x0020220000..0x002fffffff -> 0x                                                                              0020220000
[    1.385438] qcom-pcie 20000000.pci: iATU unroll: enabled
[    1.385449] qcom-pcie 20000000.pci: iATU regions: 8 ob, 8 ib, align 4K, limit                                                                               1024G
[    1.485512] qcom-pcie 20000000.pci: PCIe Gen.3 x1 link up
[    1.485646] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00
[    1.485658] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.485671] pci_bus 0000:00: root bus resource [io  0x10000-0x1ffff] (bus add                                                                              ress [0x0000-0xffff])
[    1.485680] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff]
[    1.485716] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400
[    1.485738] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    1.485806] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    1.489177] pci 0000:01:00.0: [17cb:1104] type 00 class 0x028000
[    1.489276] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    1.489790] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.489943] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by                                                                               8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCI                                                                              e x2 link)
[    1.490375] pci 0000:00:00.0: BAR 8: assigned [mem 0x20400000-0x205fffff]
[    1.490390] pci 0000:00:00.0: BAR 9: assigned [mem 0x20600000-0x207fffff 64bi                                                                              t pref]
[    1.490402] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff]
[    1.490414] pci 0000:00:00.0: BAR 7: assigned [io  0x10000-0x10fff]
[    1.490427] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bi                                                                              t]
[    1.490479] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.490488] pci 0000:00:00.0:   bridge window [io  0x10000-0x10fff]
[    1.490498] pci 0000:00:00.0:   bridge window [mem 0x20400000-0x205fffff]
[    1.490508] pci 0000:00:00.0:   bridge window [mem 0x20600000-0x207fffff 64bi                                                                              t pref]
[    1.492023] pcieport 0000:00:00.0: PME: Signaling with IRQ 17
[    1.492298] pcieport 0000:00:00.0: AER: enabled with IRQ 17
[    1.494195] bam-dma-engine 704000.dma-controller: num-channels unspecified in                                                                               dt
[    1.494210] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
[    1.498708] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.499379] msm_serial 78b3000.serial: msm_serial: detected port #0
[    1.499416] msm_serial 78b3000.serial: uartclk = 3686400
[    1.499509] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud =                                                                               230400) is a MSM
[    1.499537] msm_serial: console setup on port #0
[    2.516715] printk: console [ttyMSM0] enabled
[    2.521868] msm_serial: driver initialized
[    2.530614] loop: module loaded
[    2.531745] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    2.533362] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[    2.540559] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    2.547716] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[    2.572375] mdio_bus 90000.mdio-1: MDIO device at address 4 is missing.
[    2.581594] i2c_dev: i2c /dev entries driver
[    2.588762] sdhci: Secure Digital Host Controller Interface driver
[    2.588805] sdhci: Copyright(c) Pierre Ossman
[    2.593840] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.600358] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[    2.607073] NET: Registered PF_INET6 protocol family
[    2.610732] Segment Routing with IPv6
[    2.614939] In-situ OAM (IOAM) with IPv6
[    2.618483] NET: Registered PF_PACKET protocol family
[    2.622451] Bridge firewalling registered
[    2.627376] l2tp_core: L2TP core driver, V2.0
[    2.631063] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64                                                                              -bit
[    2.631339] l2tp_netlink: L2TP netlink interface
[    2.631374] 8021q: 802.1Q VLAN Support v1.8
[    2.670020] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count:                                                                               4
[    2.670380] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[    2.676173] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision                                                                               = 1
[    2.682744] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value                                                                               = 0
[    2.690415] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse                                                                               config = 0 boost = disable
[    2.697931] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[    2.707063] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused                                                                                    SVS: open-loop= 704000 uV
[    2.714006] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused                                                                                    NOM: open-loop= 808000 uV
[    2.723993] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused                                                                                  TURBO: open-loop= 864000 uV
[    2.733789] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused                                                                                 STURBO: open-loop= 960000 uV
[    2.743659] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused                                                                                    SVS: quot[ 7]= 729, quot_offset[ 7]=   0
[    2.753417] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused                                                                                    NOM: quot[ 7]= 931, quot_offset[ 7]= 200
[    2.764268] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused                                                                                  TURBO: quot[ 7]=1027, quot_offset[ 7]=  95
[    2.775205] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused                                                                                 STURBO: quot[ 7]=1204, quot_offset[ 7]= 175
[    2.786332] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[    2.789356] cpufreq: cpufreq_online: CPU0: Running at unlisted initial freque                                                                              ▒[    2.815556] Waiting for root device /dev/mmcblk0p20...
[    2.836972] mmc0: new HS400 MMC card at address 0001
[    2.837441] mmcblk0: mmc0:0001 004GA0 3.69 GiB
[    2.841909] Alternate GPT is invalid, using primary GPT.
[    2.845332]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16                                                                               p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
[    2.852339] mmcblk0boot0: mmc0:0001 004GA0 2.00 MiB
[    2.862848] mmcblk0boot1: mmc0:0001 004GA0 2.00 MiB
[    2.867530] mmcblk0rpmb: mmc0:0001 004GA0 512 KiB, chardev (247:0)
[    2.875852] VFS: Mounted root (squashfs filesystem) readonly on device 179:20                                                                              .
[    2.878595] Freeing unused kernel memory: 1280K
[    2.933981] Run /sbin/init as init process
[    3.011927] init: Console is alive
[    3.012045] init: - watchdog -
[    3.489200] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.530552] Key type encrypted registered
[    3.535710] hwmon hwmon0: temp1_input not attached to any thermal zone
[    3.541755] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-d                                                                              evel@redhat.com
[    3.656078] aquantia_phy_api_ops_init[2244]:INFO:qca probe aquantia phy drive                                                                              r succeeded!
[    3.662801] sfp_phy_init[412]:INFO:qca probe sfp phy driver succeeded!
[    5.323922] regi_init[3989]:INFO:Initializing HPPE Done!!
[    5.324029] regi_init[4049]:INFO:qca-ssdk module init succeeded!
[    5.330021] EDMA ver 1 hw init
[    5.334616] EDMA HW Reset completed succesfully
[    5.337268] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[    5.341666] RxDesc:1 (15-15) RxFill:1 (7-7)
[    5.347176] GMAC5(ffffff800311e900) Invalid MAC@ - using d2:45:61:a8:af:57
[    5.351952] GMAC6(ffffff8003fe5900) Invalid MAC@ - using 8a:d8:f9:c5:36:16
[    5.359086] Aquantia AQR113C 90000.mdio-1:08: FW 5.4, Build 15, Provisioning                                                                               1
[    5.373305] **********************************************************
[    5.373335] * NSS Data Plane driver
[    5.378732] **********************************************************
[    5.527573] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.527632] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus nu                                                                              mber 1
[    5.532080] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110                                                                               quirks 0x0000000002010010
[    5.539584] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x08a00000
[    5.548989] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.554792] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus nu                                                                              mber 2
[    5.560346] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    5.568249] hub 1-0:1.0: USB hub found
[    5.574519] hub 1-0:1.0: 1 port detected
[    5.578438] usb usb2: We don't know the algorithms for LPM for this host, dis                                                                              abling LPM.
[    5.582557] hub 2-0:1.0: USB hub found
[    5.590398] hub 2-0:1.0: 1 port detected
[    5.594244] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    5.598021] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus nu                                                                              mber 3
[    5.603434] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110                                                                               quirks 0x0000000002010010
[    5.610948] xhci-hcd xhci-hcd.2.auto: irq 45, io mem 0x08c00000
[    5.620343] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    5.626146] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus nu                                                                              mber 4
[    5.631701] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[    5.639549] hub 3-0:1.0: USB hub found
[    5.645885] hub 3-0:1.0: 1 port detected
[    5.649786] usb usb4: We don't know the algorithms for LPM for this host, dis                                                                              abling LPM.
[    5.653913] hub 4-0:1.0: USB hub found
[    5.661744] hub 4-0:1.0: 1 port detected
[    5.669117] usbcore: registered new interface driver usb-storage
[    5.670092] usbcore: registered new interface driver uas
[    5.675623] kmodloader: done loading kernel modules from /etc/modules-boot.d/                                                                              *
[    5.681078] init: - preinit -
[   15.443851] random: crng init done
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   17.588268] Starting lvm2 during preinit
File descriptor 3 (/dev/watchdog) leaked on lvm invocation. Parent PID 658: /bin/sh
File descriptor 3 (/dev/watchdog) leaked on lvm invocation. Parent PID 658: /bin/sh
[   18.040421] mount_root: loading kmods from internal overlay
[   18.049156] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   18.051212] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   18.167069] block: attempting to load /etc/config/fstab
[   18.167881] block: unable to load configuration (fstab: Entry not found)
[   18.171112] block: no usable configuration
[   18.178445] loop0: detected capacity change from 0 to 307500
[   18.233859] loop0: detected capacity change from 307500 to 274732
[   18.289049] F2FS-fs (loop0): Mounted with checkpoint version = 6eb89bc7
[   18.289397] mount_root: loading kmods from internal overlay
[   18.303522] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   18.303799] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   18.404885] block: attempting to load /etc/config/fstab
[   18.404946] block: unable to load configuration (fstab: Entry not found)
[   18.408928] block: no usable configuration
[   18.416432] mount_root: switching to f2fs overlay
[   18.421268] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[   18.425683] urandom-seed: Seeding with /etc/urandom.seed
[   18.452120] procd: - early -
[   18.452197] procd: - watchdog -
[   18.980536] procd: - watchdog -
[   19.002946] procd: - ubus -
[   19.155842] procd: - init -
Please press Enter to activate this console.
[   19.338961] kmodloader: loading kernel modules from /etc/modules.d/*
[   19.388357] NET: Registered PF_ALG protocol family
[   19.450171] nss_driver - fw of size 827584  bytes copied to load addr: 40000000, nss_id : 0
[   19.451622] Supported Frequencies -
[   19.451632] 187.2 MHz
[   19.457394] 748.8 MHz
[   19.461145] 1.6896 GHz
[   19.463315]
[   19.468059] ffffffc000c1d600: set sdma ffffff8005dda200
[   19.469810] ffffffc000c1d600: meminfo init succeed
[   19.477580] ffffffc000c1d600: All resources initialized and nss core0 has been brought out of reset
[   19.491373] nss_driver - fw of size 295196  bytes copied to load addr: 40800000, nss_id : 1
[   19.499956] Supported Frequencies -
[   19.499966] 187.2 MHz
[   19.502290] urngd: v1.0.2 started.
[   19.507620] node size 2 # items 4
[   19.516937] memory: 40000000 2147483648 (avl 1999642624) items 4 active_cores 2
[   19.520478] NSS DDR size is 0x1000000
[   19.527446] ffffffc000c1d600: nss core 0 booted successfully
[   19.531365] 748.8 MHz
[   19.531367] 1.6896 GHz
[   19.536986]
[   19.541569] ffffffc000c24f40: set sdma ffffff8005c93600
[   19.543292] ffffffc000c24f40: meminfo init succeed
[   19.548425] ffffffc000c24f40: All resources initialized and nss core1 has been brought out of reset
[   19.550625] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   19.552591] node size 2 # items 4
[   19.567898] memory: 40000000 2147483648 (avl 1999642624) items 4 active_cores 2
[   19.568052] gre: GRE over IPv4 demultiplexor driver
[   19.571518] NSS DDR size is 0x1000000
[   19.583356] ffffffc000c24f40: nss core 1 booted successfully
[   19.583503] ip_gre: GRE over IPv4 tunneling driver
[   19.594861] ip6_gre: GRE over IPv6 tunneling driver
[   19.601004] QCA multicast snooping installed successfully
[   19.605173] <NSS-CRYPTO>:module loaded Build_ID - 11/07/23, 01:33:43 SoC=ipq807x
[   19.610925] GACT probability on
[   19.615896] Mirror/redirect action on
[   19.621425] u32 classifier
[   19.621968]     input device check on
[   19.624589]     Actions configured
[   19.636082] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f
[   19.636122] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8
[   19.650519] NET: Registered PF_QIPCRTR protocol family
[   19.657848] xt_time: kernel timezone is -0000
[   19.676896] nf_conntrack_rtsp v0.7 loading
[   19.679915] nf_nat_rtsp v0.7 loading
[   19.694690] PPP generic driver version 2.4.2
[   19.695655] NET: Registered PF_PPPOX protocol family
[   19.699196] PPTP driver version 0.8.5
[   19.704681] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   19.706544] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   19.727071] ath11k c000000.wifi: ipq8074 hw2.0
[   19.727103] ath11k c000000.wifi: FW memory mode: 0
[   19.730657] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[   19.739097] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[   20.466722] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[   20.469104] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
[   20.473317] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   20.481356] ath11k_pci 0000:01:00.0: MSI vectors: 16
[   20.487113] ath11k_pci 0000:01:00.0: qcn9074 hw1.0
[   20.492307] ath11k_pci 0000:01:00.0: FW memory mode: 2
[   20.538350] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[   20.544796] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[   20.544824] ath11k c000000.wifi: fw_version 0x290c84a5 fw_build_timestamp 2023-03-25 07:34 fw_build_id WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
[   20.654215] mhi mhi0: Requested to power ON
[   20.654273] mhi mhi0: Power on setup success
[   20.845385] ath11k c000000.wifi: htt event 48 not handled
[   21.043917] mhi mhi0: Wait for device to enter SBL or Mission mode
[   21.098062] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.110450] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[   21.110497] ath11k_pci 0000:01:00.0: fw_version 0x290c8569 fw_build_timestamp 2023-03-25 06:50 fw_build_id
[   21.554459] ath11k_pci 0000:01:00.0: htt event 48 not handled
[   22.844944] ECM init
[   22.845011] ECM database jhash random seed: 0x6b30153f
[   22.984070] ECM init complete
[   23.717924] br-lan: port 1(lan) entered blocking state
[   23.717965] br-lan: port 1(lan) entered disabled state
[   23.722270] device lan entered promiscuous mode
[   24.111067] br-lan: port 2(phy1-ap0) entered blocking state
[   24.111107] br-lan: port 2(phy1-ap0) entered disabled state
[   24.115832] device phy1-ap0 entered promiscuous mode
[   24.139860] br-lan: port 2(phy1-ap0) entered blocking state
[   24.139913] br-lan: port 2(phy1-ap0) entered forwarding state
[   24.144595] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   24.315445] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[   24.362509] br-lan: port 3(phy2-ap0) entered blocking state
[   24.362545] br-lan: port 3(phy2-ap0) entered disabled state
[   24.367165] device phy2-ap0 entered promiscuous mode
[   29.358169] nss-dp 3a007000.dp6-syn wan: PHY Link up speed: 10000
[   29.358241] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[   29.993909] nss-dp 3a003000.dp5-syn lan: PHY Link up speed: 10000
[   29.994025] br-lan: port 1(lan) entered blocking state
[   29.998990] br-lan: port 1(lan) entered forwarding state
[   33.113942] l11: disabling
[  100.063581] nss-dp 3a007000.dp6-syn wan: PHY Link is down
[  104.936176] Unable to handle kernel read from unreadable memory at virtual address 0000000000000028
[  104.936218] Mem abort info:
[  104.944035]   ESR = 0x0000000096000005
[  104.946801]   EC = 0x25: DABT (current EL), IL = 32 bits
[  104.950623]   SET = 0, FnV = 0
[  104.956093]   EA = 0, S1PTW = 0
[  104.958953]   FSC = 0x05: level 1 translation fault
[  104.961994] Data abort info:
[  104.966855]   ISV = 0, ISS = 0x00000005
[  104.969978]   CM = 0, WnR = 0
[  104.973540] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000059f78000
[  104.976667] [0000000000000028] pgd=0800000059dd5003, p4d=0800000059dd5003, pud=0800000059dd5003, pmd=0000000000000000
[  104.983106] Internal error: Oops: 0000000096000005 [#1] SMP
[  104.993679] Modules linked in: ecm xt_connlimit pppoe ppp_async nft_fib_inet nf_flow_table_inet nf_conncount iptable_nat ath11k_pci ath11k_ahb ath11k xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE wireguard pptp pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat_rtsp nf_nat nf_flow_table nf_conntrack_rtsp nf_conntrack mac80211 libchacha20poly1305 iptable_mangle iptable_filter ipt_REJECT ip_tables chacha_neon cfg80211 xt_time xt_tcpudp xt_recent xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG x_tables tcp_bbr spidev slhc qrtr_smd qrtr_mhi qrtr qmi_helpers poly1305_neon nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 mhi mdio_netlink libcurve25519_generic libcrc32c libchacha crc_ccitt compat
[  104.993813]  sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact qca_nss_cfi_cryptoapi qca_nss_crypto qca_mcs bonding ip6_gre ip_gre gre ifb sit qca_nss_drv ip6_tunnel oid_registry tunnel6 tunnel4 vxlan crypto_user algif_skcipher algif_rng algif_hash algif_aead af_alg sha512_generic seqiv jitterentropy_rng drbg michael_mic hmac cmac uas usb_storage leds_fan5646 leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom qca_nss_dp qca_ssdk gpio_button_hotplug f2fs ext4 mbcache jbd2 dm_mirror dm_region_hash dm_log dm_crypt dm_mod dax aquantia hwmon tpm rng_core crc32c_generic crc32_generic encrypted_keys trusted
[  105.124745] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.1.61 #0
[  105.146979] Hardware name: Verizon CR1000A (DT)
[  105.152618] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  105.157137] pc : nss_crypto_hdr_free+0x5c/0x144 [qca_nss_crypto]
[  105.164080] lr : nss_cryptoapi_skcipher_done+0x40/0xa4 [qca_nss_cfi_cryptoapi]
[  105.170332] sp : ffffffc008c83d20
[  105.177355] x29: ffffffc008c83d20 x28: ffffffc000c25000 x27: ffffff8005b3c100
[  105.180748] x26: ffffffc000c24f40 x25: 000000000000007f x24: ffffff8007a6107c
[  105.187866] x23: ffffff8007a61040 x22: 0000000000000000 x21: ffffffc000d2ccc0
[  105.194984] x20: ffffff80079f3400 x19: 0000000000000000 x18: 0000000000360000
[  105.202103] x17: ffffffc077162000 x16: ffffffc008c80000 x15: 0000000030f97cda
[  105.209220] x14: 0000000000000377 x13: 0000000000000001 x12: 0000000000000000
[  105.216339] x11: 0000000000000040 x10: ffffffc008bd74e8 x9 : ffffffc008bd74e0
[  105.223457] x8 : ffffff807fbdb028 x7 : 0000000000000000 x6 : 9582b054b48279b0
[  105.230575] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000001
[  105.237693] x2 : 0000000000000000 x1 : ffffff8002098000 x0 : 0000000000000028
[  105.244812] Call trace:
[  105.251921]  nss_crypto_hdr_free+0x5c/0x144 [qca_nss_crypto]
[  105.254183]  nss_cryptoapi_skcipher_done+0x40/0xa4 [qca_nss_cfi_cryptoapi]
[  105.260089]  nss_crypto_transform_done+0x9c/0x170 [qca_nss_crypto]
[  105.266771]  nss_core_send_buffer+0x1964/0x1ff0 [qca_nss_drv]
[  105.272933]  nss_core_handle_napi_queue+0x30/0x80 [qca_nss_drv]
[  105.278749]  __napi_poll+0x38/0x190
[  105.284474]  net_rx_action+0x160/0x320
[  105.287947]  _stext+0x10c/0x290
[  105.291765]  ____do_softirq+0x10/0x20
[  105.294805]  call_on_irq_stack+0x24/0x50
[  105.298624]  do_softirq_own_stack+0x1c/0x30
[  105.302617]  __irq_exit_rcu+0xc4/0xf0
[  105.306523]  irq_exit_rcu+0x10/0x20
[  105.310341]  el1_interrupt+0x38/0x5c
[  105.313640]  el1h_64_irq_handler+0x18/0x2c
[  105.317461]  el1h_64_irq+0x68/0x6c
[  105.321365]  arch_cpu_idle+0x18/0x2c
[  105.324752]  default_idle_call+0x30/0x74
[  105.328486]  do_idle+0x228/0x250
[  105.332390]  cpu_startup_entry+0x38/0x40
[  105.335603]  arch_show_interrupts+0x0/0x16c
[  105.339510]  __secondary_switched+0xb0/0xb4
[  105.343421] Code: d2800002 9100a260 52800023 f9800011 (885ffc01)
[  105.347589] ---[ end trace 0000000000000000 ]---
[  105.353835] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[  105.358527] SMP: stopping secondary CPUs
[  105.365208] Kernel Offset: disabled
[  105.369283] CPU features: 0x00000,00000000,0000400b
[  105.372498] Memory Limit: none
[  106.377363] Rebooting in 3 seconds..