On the latest build for my ipq6000/Linksys-MR7350 NSS works fine. Zero CPU usage while speed test on a smartphone. I have a 300Mbit WAN.
Summary
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014]
[ 0.000000] Linux version 6.6.30 (vladdrako@Vladdrako-PC) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.1.0 r28188-2122aea90e) 14.1.0, GNU ld (GNU Binutils) 2.42) #0 SMP PREEMPT Mon Jun 3 07:30:43 2024
[ 0.000000] Machine model: Linksys MR7350
[ 0.000000] OF: reserved mem: 0x0000000000060000..0x0000000000065fff (24 KiB) nomap non-reusable memory@60000
[ 0.000000] OF: reserved mem: 0x0000000040000000..0x0000000040ffffff (16384 KiB) nomap non-reusable nss@40000000
[ 0.000000] OF: reserved mem: 0x000000004a100000..0x000000004a4fffff (4096 KiB) nomap non-reusable bootloader@4a100000
[ 0.000000] OF: reserved mem: 0x000000004a600000..0x000000004a9fffff (4096 KiB) nomap non-reusable tzapp@4a600000
[ 0.000000] OF: reserved mem: 0x000000004aa00000..0x000000004aafffff (1024 KiB) nomap non-reusable smem@4aa00000
[ 0.000000] OF: reserved mem: 0x000000004ab00000..0x000000004e1fffff (56320 KiB) nomap non-reusable wcnss@4ab00000
[ 0.000000] OF: reserved mem: 0x0000000050000000..0x00000000500fffff (1024 KiB) nomap non-reusable q6_etr_dump@1
[ 0.000000] OF: reserved mem: 0x0000000050100000..0x00000000501fffff (1024 KiB) nomap non-reusable m3_dump@50100000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a0fffff]
[ 0.000000] node 0: [mem 0x000000004a100000-0x000000004a4fffff]
[ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff]
[ 0.000000] node 0: [mem 0x000000004a600000-0x000000004e1fffff]
[ 0.000000] node 0: [mem 0x000000004e200000-0x000000004fffffff]
[ 0.000000] node 0: [mem 0x0000000050000000-0x00000000501fffff]
[ 0.000000] node 0: [mem 0x0000000050200000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 19 pages/cpu s39608 r8192 d30024 u77824
[ 0.000000] pcpu-alloc: s39608 r8192 d30024 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=rootfs root=mtd:squashfs rootwait ubi.block=0,rootfs root=/dev/ubiblock0_0 mitigations=off noirqdebug cgroup_disable=memory
[ 0.000000] IRQ lockup detection disabled
[ 0.000000] cgroup: Disabling memory control group subsystem
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[ 0.000000] software IO TLB: mapped [mem 0x000000005f4c0000-0x000000005f5c0000] (1MB)
[ 0.000000] Memory: 412236K/524288K available (11456K kernel code, 1058K rwdata, 1732K rodata, 1920K init, 298K bss, 112052K reserved, 0K cma-reserved)
[ 0.000000] le9 Unofficial (le9uo) working set protection 1.6 by Masahito Suzuki (forked from hakavlad's original le9 patch)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: 0xffffffc080010000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000111] Console: colour dummy device 80x25
[ 0.000124] printk: console [tty0] enabled
[ 0.000857] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.000890] pid_max: default: 32768 minimum: 301
[ 0.001264] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.001296] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.002262] spectre-v4 mitigation disabled by command-line option
[ 0.003235] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003350] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003563] rcu: Hierarchical SRCU implementation.
[ 0.003581] rcu: Max phase no-delay instances is 400.
[ 0.003810] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.004298] smp: Bringing up secondary CPUs ...
[ 0.004930] Detected VIPT I-cache on CPU1
[ 0.005041] CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
[ 0.005735] Detected VIPT I-cache on CPU2
[ 0.005816] CPU2: Booted secondary processor 0x0000000002 [0x51af8014]
[ 0.006454] Detected VIPT I-cache on CPU3
[ 0.006532] CPU3: Booted secondary processor 0x0000000003 [0x51af8014]
[ 0.006607] smp: Brought up 1 node, 4 CPUs
[ 0.006692] SMP: Total of 4 processors activated.
[ 0.006709] CPU features: detected: 32-bit EL0 Support
[ 0.006725] CPU features: detected: CRC32 instructions
[ 0.006811] CPU: All CPU(s) started at EL1
[ 0.006827] alternatives: applying system-wide alternatives
[ 0.021982] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.022045] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.022315] pinctrl core: initialized pinctrl subsystem
[ 0.023279] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.023957] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.024014] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.024069] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.024524] thermal_sys: Registered thermal governor 'step_wise'
[ 0.024532] thermal_sys: Registered thermal governor 'user_space'
[ 0.024631] cpuidle: using governor menu
[ 0.024940] ASID allocator initialised with 65536 entries
[ 0.082248] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.086246] Modules: 28608 pages in range for non-PLT usage
[ 0.086260] Modules: 520128 pages in range for PLT usage
[ 0.087406] cryptd: max_cpu_qlen set to 1000
[ 0.089467] SCSI subsystem initialized
[ 0.089706] usbcore: registered new interface driver usbfs
[ 0.089760] usbcore: registered new interface driver hub
[ 0.089838] usbcore: registered new device driver usb
[ 0.090394] qcom_scm: convention: smc arm 64
[ 0.091737] s2: Bringing 0uV into 725000-725000uV
[ 0.092847] l2: Bringing 0uV into 1800000-1800000uV
[ 0.093030] qcom_rpm_smd_regulator remoteproc:glink-edge:rpm-requests:regulators: Supply for l2 (l2) resolved to itself
[ 0.093087] clocksource: Switched to clocksource arch_sys_counter
[ 0.098173] NET: Registered PF_INET protocol family
[ 0.098317] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.099220] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.099313] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.099349] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.099417] TCP bind hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.099648] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.099768] UDP hash table entries: 256 (order: 2, 24576 bytes, linear)
[ 0.099818] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear)
[ 0.100037] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.102265] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.102608] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.102867] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (CMODE_SIZE) (c) 2001-2006 Red Hat, Inc.
[ 0.139273] Key type asymmetric registered
[ 0.139367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.139529] io scheduler mq-deadline registered
[ 0.139553] io scheduler kyber registered
[ 0.139634] io scheduler bfq registered
[ 0.141699] qcom-qmp-usb-phy 78000.ssphy: supply vdda-phy not found, using dummy regulator
[ 0.141895] qcom-qmp-usb-phy 78000.ssphy: supply vdda-pll not found, using dummy regulator
[ 0.143777] qcom-qusb2-phy 79000.qusb: supply vdd not found, using dummy regulator
[ 0.143953] qcom-qusb2-phy 79000.qusb: supply vdda-pll not found, using dummy regulator
[ 0.144034] qcom-qusb2-phy 79000.qusb: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.144297] qcom-qusb2-phy 79000.qusb: Registered Qcom-QUSB2 phy
[ 0.155383] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.157143] msm_serial 78b0000.serial: msm_serial: detected port #1
[ 0.157216] msm_serial 78b0000.serial: uartclk = 24000000
[ 0.157624] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 22, base_baud = 1500000) is a MSM
[ 0.158313] msm_serial 78b1000.serial: msm_serial: detected port #0
[ 0.158382] msm_serial 78b1000.serial: uartclk = 1843200
[ 0.158796] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 23, base_baud = 115200) is a MSM
[ 0.158860] msm_serial: console setup on port #0
[ 0.158952] printk: console [ttyMSM0] enabled
[ 1.074265] msm_serial: driver initialized
[ 1.083775] loop: module loaded
[ 1.084330] zram: Added device: zram0
[ 1.087245] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xaa
[ 1.089590] nand: Macronix MX30UF2G18AC
[ 1.095996] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.099587] qcom-nandc 79b0000.nand-controller: Opcode not supported: 238
[ 1.107198] Block protection check failed
[ 1.136436] i2c_dev: i2c /dev entries driver
[ 1.143480] sdhci: Secure Digital Host Controller Interface driver
[ 1.143551] sdhci: Copyright(c) Pierre Ossman
[ 1.148617] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.156429] remoteproc remoteproc0: releasing cd00000.remoteproc
[ 1.161728] NET: Registered PF_INET6 protocol family
[ 1.165744] Segment Routing with IPv6
[ 1.169723] In-situ OAM (IOAM) with IPv6
[ 1.173328] NET: Registered PF_PACKET protocol family
[ 1.177288] Bridge firewalling registered
[ 1.182323] l2tp_core: L2TP core driver, V2.0
[ 1.186182] l2tp_netlink: L2TP netlink interface
[ 1.190549] 8021q: 802.1Q VLAN Support v1.8
[ 1.212584] zswap: loaded using pool zstd/zsmalloc
[ 1.241493] lrng_drng_mgr: Initial DRNG initialized triggering first seeding
[ 1.242929] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 1.247926] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 1.254683] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 2
[ 1.261276] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 1.268935] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 1.276463] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 1.285578] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 675000 uV
[ 1.292532] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 787500 uV
[ 1.302513] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 850000 uV
[ 1.312322] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 900000 uV
[ 1.322158] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 597, quot_offset[ 7]= 0
[ 1.331944] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 800, quot_offset[ 7]= 200
[ 1.342794] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]= 905, quot_offset[ 7]= 105
[ 1.353742] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]= 980, quot_offset[ 7]= 75
[ 1.364982] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 1.367810] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xaa
[ 1.382366] nand: Macronix MX30UF2G18AC
[ 1.388779] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.392371] qcom-nandc 79b0000.nand-controller: Opcode not supported: 238
[ 1.399988] Block protection check failed
[ 1.407193] 20 qcomsmem partitions found on MTD device qcom_nand.0
[ 1.410856] Creating 20 MTD partitions on "qcom_nand.0":
[ 1.416914] 0x000000000000-0x000000180000 : "0:sbl1"
[ 1.424230] 0x000000180000-0x000000280000 : "0:mibib"
[ 1.427743] lrng_es_mgr: LRNG initial entropy level 36 bits of entropy
[ 1.433253] 0x000000280000-0x000000600000 : "0:qsee"
[ 1.442159] 0x000000600000-0x000000680000 : "0:devcfg"
[ 1.444747] 0x000000680000-0x000000700000 : "0:rpm"
[ 1.449696] 0x000000700000-0x000000780000 : "0:cdt"
[ 1.454567] 0x000000780000-0x000000800000 : "0:appsblenv"
[ 1.459407] 0x000000800000-0x000000980000 : "0:appsbl"
[ 1.465673] 0x000000980000-0x000000a00000 : "0:art"
[ 1.469503] lrng_es_mgr: LRNG minimally seeded with 128 bits of entropy
[ 1.469958] 0x000000a00000-0x000001300000 : "0:wififw"
[ 1.488000] 0x000001300000-0x000001380000 : "0:ethphyfw"
[ 1.489008] 0x000001380000-0x000001400000 : "u_env"
[ 1.493376] 0x000001400000-0x000001440000 : "s_env"
[ 1.497745] 0x000001440000-0x000001480000 : "devinfo"
[ 1.502609] 0x000001480000-0x000001c80000 : "kernel"
[ 1.511612] lrng_es_mgr: LRNG fully operational
[ 1.512133] lrng_es_mgr: LRNG fully seeded with 256 bits of entropy
[ 1.518629] 0x000001c80000-0x000006680000 : "rootfs"
[ 1.580351] mtd: setting mtd15 (rootfs) as root device
[ 1.580664] mtdsplit: no squashfs found in "rootfs"
[ 1.584470] 0x000006680000-0x000006e80000 : "alt_kernel"
[ 1.595969] 0x000006e80000-0x00000b880000 : "alt_rootfs"
[ 1.653717] 0x00000b880000-0x00000ba80000 : "sysdiag"
[ 1.655876] 0x00000ba80000-0x00000fe80000 : "syscfg"
[ 1.720907] core: _opp_supported_by_regulators: OPP minuV: 7 maxuV: 7, not supported by regulator
[ 1.720983] cpu cpu0: _opp_add: OPP not supported by regulators (1608000000)
[ 1.729164] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 799999 KHz, changing to: 864000 KHz
[ 1.738475] remoteproc remoteproc0: cd00000.remoteproc is available
[ 1.746992] ubi0: attaching mtd15
[ 2.071232] ubi0: scanning is finished
[ 2.076760] ubi0: attached mtd15 (name "rootfs", size 74 MiB)
[ 2.076814] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.081523] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.088276] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.095132] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0
[ 2.101901] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.108155] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1717399843
[ 2.115191] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 40
[ 2.124490] ubi0: background thread "ubi_bgt0d" started, PID 627
[ 2.125246] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.139818] clk: Disabling unused clocks
[ 2.375664] init: Console is alive
[ 2.375828] init: - watchdog -
[ 3.436115] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.450901] Key type encrypted registered
[ 3.460006] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 3.495654] JFS: nTxBlock = 3235, nTxLock = 25884
[ 3.535627] SGI XFS with security attributes, no debug enabled
[ 3.538040] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 3.588376] ssdk_dt_parse_interrupt[934]:INFO:intr-gpio does not exist
[ 3.912494] __adpt_hppe_uniphy_psgmii_mode_set[1194]:INFO:uniphy 0 psgmii channel selection
[ 4.022210] regi_init[2525]:INFO:Initializing CPPE Done!!
[ 4.022309] regi_init[2574]:INFO:qca-ssdk module init succeeded!
[ 4.029036] EDMA ver 1 hw init
[ 4.032943] EDMA HW Reset completed succesfully
[ 4.035565] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23)
[ 4.039964] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 4.045908] dp1: ppe offload disabled: 0 for macid 1
[ 4.049510] dp1: Switch attached to macid 1 status: 0
[ 4.219065] GMAC2(ffffff80064369c0) Invalid MAC@ - using 22:10:d6:04:9e:e9
[ 4.219154] dp2: ppe offload disabled: 0 for macid 2
[ 4.224887] dp2: Switch attached to macid 2 status: 0
[ 4.284947] GMAC3(ffffff8005da99c0) Invalid MAC@ - using 9a:7e:8a:de:d4:38
[ 4.285007] dp3: ppe offload disabled: 0 for macid 3
[ 4.290753] dp3: Switch attached to macid 3 status: 0
[ 4.350669] GMAC4(ffffff8005dae9c0) Invalid MAC@ - using d6:42:df:64:14:72
[ 4.350723] dp4: ppe offload disabled: 0 for macid 4
[ 4.356466] dp4: Switch attached to macid 4 status: 0
[ 4.416016] GMAC5(ffffff8005ef39c0) Invalid MAC@ - using ae:ab:50:d8:6e:b1
[ 4.416099] dp5: ppe offload disabled: 0 for macid 5
[ 4.421843] dp5: Switch attached to macid 5 status: 0
[ 4.481626] **********************************************************
[ 4.481683] * NSS Data Plane driver
[ 4.487072] **********************************************************
[ 4.509099] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.509165] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 4.514475] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008000000010
[ 4.521109] xhci-hcd xhci-hcd.1.auto: irq 39, io mem 0x08a00000
[ 4.530563] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.536332] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 4.541888] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.549797] hub 1-0:1.0: USB hub found
[ 4.556052] hub 1-0:1.0: 1 port detected
[ 4.580273] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.580805] hub 2-0:1.0: USB hub found
[ 4.587468] hub 2-0:1.0: 1 port detected
[ 4.624843] usbcore: registered new interface driver usb-storage
[ 4.626476] usbcore: registered new interface driver uas
[ 4.630386] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.646201] init: - preinit -
[ 7.490531] mount_root: loading kmods from internal overlay
[ 7.515582] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 7.518446] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 7.600111] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 7.600306] block: unable to load configuration (fstab: Entry not found)
[ 7.606050] block: attempting to load /tmp/overlay/etc/config/fstab
[ 7.612801] block: unable to load configuration (fstab: Entry not found)
[ 7.618761] block: attempting to load /etc/config/fstab
[ 7.626218] block: unable to load configuration (fstab: Entry not found)
[ 7.630640] block: no usable configuration
[ 7.639707] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 7.641508] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 948
[ 7.671182] UBIFS (ubi0:1): recovery needed
[ 7.764468] UBIFS (ubi0:1): recovery completed
[ 7.764608] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 7.767841] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.775747] UBIFS (ubi0:1): FS size: 22093824 bytes (21 MiB, 174 LEBs), max 184 LEBs, journal size 1142784 bytes (1 MiB, 9 LEBs)
[ 7.785633] UBIFS (ubi0:1): reserved for root: 1043545 bytes (1019 KiB)
[ 7.804553] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 7.819625] block: extroot: not configured
[ 7.821957] UBIFS (ubi0:1): un-mount UBI device 0
[ 7.826008] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 7.834096] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 7.836938] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 951
[ 7.897442] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 7.897513] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.904306] UBIFS (ubi0:1): FS size: 22093824 bytes (21 MiB, 174 LEBs), max 184 LEBs, journal size 1142784 bytes (1 MiB, 9 LEBs)
[ 7.914185] UBIFS (ubi0:1): reserved for root: 1043545 bytes (1019 KiB)
[ 7.961504] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 7.965951] block: extroot: not configured
[ 7.969009] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 7.971611] block: extroot: not configured
[ 7.980365] mount_root: switching to ubifs overlay
[ 7.986729] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 8.020834] procd: - early -
[ 8.025225] procd: - watchdog -
[ 8.577715] XFS (sda): Ending clean mount
[ 8.709897] hub 1-1.4:1.0: USB hub found
[ 8.710652] hub 1-1.4:1.0: 4 ports detected
[ 9.850548] procd: - watchdog -
[ 9.863255] procd: - ubus -
[ 9.912644] sdc: sdc1 sdc2 sdc3
[ 9.917566] procd: - init -
[ 10.496557] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.533996] NET: Registered PF_ALG protocol family
[ 10.584231] Key type dns_resolver registered
[ 10.598049] Key type cifs.idmap registered
[ 10.619117] tun: Universal TUN/TAP device driver, 1.6
[ 10.692509] ffffffc07979e400: NSS core 0 DDR from 40000000 to 41000000
[ 10.703391] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 10.706581] nat46: module (version 4c5beee236841724219598fabb1edc93d4f08ce5) loaded.
[ 10.710620] gre: GRE over IPv4 demultiplexor driver
[ 10.717394] ip_gre: GRE over IPv4 tunneling driver
[ 10.724370] ip6_gre: GRE over IPv6 tunneling driver
[ 10.725168] ffffffc07979e400: nss core 0 booted successfully
[ 10.739906] QCA multicast snooping installed successfully
[ 10.754205] Jool: Core Jool v4.1.11.0 module inserted.
[ 10.755217] NAT64 Jool v4.1.11.0 module inserted.
[ 10.759043] SIIT Jool v4.1.11.0 module inserted.
[ 10.789636] cryptodev: driver 1.13 loaded.
[ 10.791984] nss_vlan_mgr_init_module[1940]:Module (Build Build Id: 06/03/24, 07:36:56) loaded
[ 10.799851] PPP generic driver version 2.4.2
[ 10.815920] NET: Registered PF_PPPOX protocol family
[ 10.831402] nss-macsec0 DT exist!
[ 10.831631] nss-macsec1 DT exist!
[ 10.833939] cannot find nss-macsec2 node
[ 10.833981] cannot find nss-macsec3 node
[ 10.833985] nss_macsec init success
[ 10.846933] hid: raw HID events driver (C) Jiri Kosina
[ 10.862934] GACT probability on
[ 10.868147] Mirror/redirect action on
[ 10.877211] u32 classifier
[ 10.877258] input device check on
[ 10.878854] Actions configured
[ 10.895483] ntfs3: Max link count 4000
[ 10.906529] ntfs3: Enabled Linux POSIX ACLs support
[ 10.915662] fuse: init (API version 7.39)
[ 10.935428] usbcore: registered new interface driver cdc_wdm
[ 10.937707] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4
[ 10.940193] Backport generated by backports.git 193becf2
[ 10.964213] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.045661] PPTP driver version 0.8.5
[ 11.049327] NET: Registered PF_QIPCRTR protocol family
[ 11.061739] usbcore: registered new interface driver ums-alauda
[ 11.063391] usbcore: registered new interface driver ums-cypress
[ 11.068272] usbcore: registered new interface driver ums-datafab
[ 11.074216] usbcore: registered new interface driver ums-freecom
[ 11.080267] usbcore: registered new interface driver ums-isd200
[ 11.086396] usbcore: registered new interface driver ums-jumpshot
[ 11.091886] usbcore: registered new interface driver ums-karma
[ 11.098974] usbcore: registered new interface driver ums-sddr09
[ 11.105441] usbcore: registered new interface driver ums-sddr55
[ 11.110264] usbcore: registered new interface driver ums-usbat
[ 11.158901] hid-generic 0003:0D9F:0004.0001: hiddev96,hidraw0: USB HID v1.00 Device [POWERCOM Co.,LTD HID UPS Battery] on usb-xhci-hcd.1.auto-1.4.3/input0
[ 11.159192] usbcore: registered new interface driver usbhid
[ 11.171659] usbhid: USB HID core driver
[ 11.178342] usbcore: registered new interface driver usblp
[ 11.187797] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 11.187851] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 11.224187] xt_time: kernel timezone is -0000
[ 11.225813] usbcore: registered new interface driver cdc_ether
[ 11.229878] usbcore: registered new interface driver cdc_ncm
[ 11.301859] usbcore: registered new interface driver rndis_host
[ 11.318675] ath11k c000000.wifi: ipq6018 hw1.0
[ 11.318725] ath11k c000000.wifi: FW memory mode: 2
[ 11.322414] remoteproc remoteproc0: powering up cd00000.remoteproc
[ 11.333881] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[ 11.931256] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[ 11.933253] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 11.950315] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[ 11.955855] ath11k c000000.wifi: fw_version 0x25008f8e fw_build_timestamp 2024-03-01 03:54 fw_build_id WLAN.HK.2.5.0.1-03982-QCAHKSWPL_SILICONZ-3
[ 11.956419] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.098336] ath11k c000000.wifi: nss init soc nss if_num 203 userpd_id 0
[ 13.237983] XFS (sdb): Mounting V5 Filesystem 607ce313-e5a1-4310-ae92-3e4d5acc9422
[ 13.466290] XFS (sdb): Ending clean mount
[ 13.724281] F2FS-fs (sdc3): Mounted with checkpoint version = 2d0bd97a
[ 14.423008] zram0: detected capacity change from 0 to 512
[ 14.438154] Adding 252k swap on /dev/zram0. Priority:100 extents:1 across:252k SSDsc
[ 14.809875] usb 1-1.4.3: USB disconnect, device number 7
[ 17.672127] usb 1-1.4.3: new low-speed USB device number 8 using xhci-hcd
[ 17.905605] hid-generic 0003:0D9F:0004.0002: hiddev96,hidraw0: USB HID v1.00 Device [POWERCOM Co.,LTD HID UPS Battery] on usb-xhci-hcd.1.auto-1.4.3/input0
[ 20.378614] F2FS-fs (sdc2): device does not support discard
[ 20.407700] F2FS-fs (sdc2): Mounted with checkpoint version = 28c8673b
[ 21.380734] ECM init
[ 21.391463] ECM database jhash random seed: 0x6b5a2e42
[ 21.414347] ECM init complete
[ 21.911226] br-lan: port 1(lan1) entered blocking state
[ 21.921954] br-lan: port 1(lan1) entered disabled state
[ 21.927409] nss-dp 3a001000.dp1 lan1: entered allmulticast mode
[ 21.932636] nss-dp 3a001000.dp1 lan1: entered promiscuous mode
[ 21.958640] br-lan: port 2(lan2) entered blocking state
[ 21.969407] br-lan: port 2(lan2) entered disabled state
[ 21.974399] nss-dp 3a001200.dp2 lan2: entered allmulticast mode
[ 21.980181] nss-dp 3a001200.dp2 lan2: entered promiscuous mode
[ 21.997883] br-lan: port 3(lan3) entered blocking state
[ 21.997967] br-lan: port 3(lan3) entered disabled state
[ 22.002118] nss-dp 3a001400.dp3 lan3: entered allmulticast mode
[ 22.008301] nss-dp 3a001400.dp3 lan3: entered promiscuous mode
[ 22.031679] br-lan: port 4(lan4) entered blocking state
[ 22.031766] br-lan: port 4(lan4) entered disabled state
[ 22.036098] nss-dp 3a001600.dp4 lan4: entered allmulticast mode
[ 22.042018] nss-dp 3a001600.dp4 lan4: entered promiscuous mode
[ 22.720443] br-lan: port 5(phy0-ap0) entered blocking state
[ 22.731212] br-lan: port 5(phy0-ap0) entered disabled state
[ 22.736520] ath11k c000000.wifi phy0-ap0: entered allmulticast mode
[ 22.742462] ath11k c000000.wifi phy0-ap0: entered promiscuous mode
[ 22.748473] br-lan: port 5(phy0-ap0) entered blocking state
[ 22.754503] br-lan: port 5(phy0-ap0) entered forwarding state
[ 23.659177] br-lan: port 6(phy1-ap0) entered blocking state
[ 23.669988] br-lan: port 6(phy1-ap0) entered disabled state
[ 23.675349] ath11k c000000.wifi phy1-ap0: entered allmulticast mode
[ 23.681306] ath11k c000000.wifi phy1-ap0: entered promiscuous mode
[ 23.799472] br-lan: port 6(phy1-ap0) entered blocking state
[ 23.799555] br-lan: port 6(phy1-ap0) entered forwarding state
[ 24.992675] nss-dp 3a001000.dp1 lan1: PHY Link up speed: 1000
[ 25.004769] br-lan: port 1(lan1) entered blocking state
[ 25.009143] br-lan: port 1(lan1) entered forwarding state
[ 25.056686] nss-dp 3a001200.dp2 lan2: PHY Link up speed: 1000
[ 25.057331] br-lan: port 2(lan2) entered blocking state
[ 25.061471] br-lan: port 2(lan2) entered forwarding state
[ 25.120462] nss-dp 3a001800.dp5 wan: PHY Link up speed: 1000
[ 25.121575] nss-dp 3a001600.dp4 lan4: PHY Link up speed: 100
[ 25.127070] br-lan: port 4(lan4) entered blocking state
[ 25.130892] br-lan: port 4(lan4) entered forwarding state
[ 30.221232] smp_affinity: ppdu-end-interrupts-mac1 pinned to 8
[ 30.224967] smp_affinity: ppdu-end-interrupts-mac2 pinned to 4
[ 30.234405] smp_affinity: ce0 pinned to 2
[ 30.238539] smp_affinity: ce1 pinned to 2
[ 30.241862] smp_affinity: ce2 pinned to 2
[ 30.245425] smp_affinity: ce3 pinned to 2
[ 30.249168] smp_affinity: ce5 pinned to 2
[ 30.253416] smp_affinity: ce7 pinned to 2
[ 30.257353] smp_affinity: ce9 pinned to 2
[ 30.261255] smp_affinity: ce10 pinned to 2
[ 30.265330] smp_affinity: ce11 pinned to 2
[ 30.268544] smp_affinity: xhci-hcd:usb1 pinned to 4
[ 31.187000] 2024.06.04 13:45:20 up 0 min, load average: 1.54, 0.36, 0.12
[ 40.416556] nss-dp 3a001400.dp3 lan3: PHY Link up speed: 1000
[ 40.416687] br-lan: port 3(lan3) entered blocking state
[ 40.421329] br-lan: port 3(lan3) entered forwarding state
[ 183.712665] nss-dp 3a001000.dp1 lan1: PHY Link is down
[ 183.712962] br-lan: port 1(lan1) entered disabled state
[ 185.760813] nss-dp 3a001000.dp1 lan1: PHY Link up speed: 1000
[ 185.760922] br-lan: port 1(lan1) entered blocking state
[ 185.765572] br-lan: port 1(lan1) entered forwarding state
root@MR7350:~# cat /sys/kernel/debug/qca-nss-drv/stats/cpu_load_ubi
CPU Utilization:
Note: Averaged over 1 second
Core 0:
Min Avg Max
4% 4% 7%