Qualcommax NSS Build

l33tlinuxh4x0r · 2024-02-28T22:21:47.325Z

To be more accurate... I cannot grab an IP from my ISP. The port is "up" but no IP similarly 10G-2 (my computer) is not assigned an IP from dhcp either I have to manually assign an IP to connect or use a 1G port. Using the 1G ports seems to work for an IP but I have not tried them for WAN.

dmesg shows "uniphy autoneg time out". However it also says a line or two up that it is up at 2500 which is the speed of my ISP's hardware. I have tried with AgustinLorenzo's latest build.

sppmaster · 2024-02-28T22:26:25.043Z

Unfortunately I cannot test this at the moment and most probably won't be able to try it tomorrow.
Looks really similar to the issue I got with 1G port.
@robimarko Do you have an idea?

robimarko · 2024-02-28T22:27:25.586Z

I dont use NSS builds so no idea

sppmaster · 2024-02-28T22:31:50.020Z

l33tlinuxh4x0r:

The port is "up" but no IP similarly 10G-2 (my computer) is not assigned an IP from dhcp either I have to manually assign an IP to connect or use a 1G port.

My PC is connected to the 10G_2 port and I don't have issues getting IP from dhcp. So probably anything else on your side.

Edit - The issue is with 10G_1 port only in my case.

l33tlinuxh4x0r · 2024-02-28T22:48:10.244Z

I'm building a new build from scratch using qosmio github repo https://github.com/qosmio/openwrt-ipq as I don't need everything included in the other build and I need somethings that aren't in that build. Trying to see if it works. IF it does, I'll upload my qnap 301w image and config file so you can build yourself if you want.

Fwiw My build DHCP gives me an address for my PC 10G-2 port... 10G-1 is still broken (no ip from ISP) looks like it isn't build specific, however it does seem to be nss related.

sppmaster · 2024-02-29T00:21:26.474Z

I can confirm this bug. 10G_1 port cannot get IP if it's used as WAN port and if it's used on br-lan device/s connected to it cannot get IP from DHCP. This is with NSS wifi builds.
I tested only @qosmio NSS wifi build and with QNAP stock 10G firmware loaded from NVMEM. 10G_2 port works OK. Maybe it's not so strange because QNAP uses 2 separate firmwares for each 10G port. But with regular OpenWrt build both 10G ports work OK.
Should work OK with the previous method to load 10G firmware from U-boot.

   57.312453] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[   58.208483] nss-dp 3a001800.dp5 10g-1: PHY Link up speed: 1000
[   58.208603] br-lan: port 1(10g-1) entered blocking state
[   58.213228] br-lan: port 1(10g-1) entered forwarding state
[   58.272735] nss-dp 3a007000.dp6-syn 10g-2: PHY Link up speed: 1000
[   58.272831] br-lan: port 2(10g-2) entered blocking state
[   58.277826] br-lan: port 2(10g-2) entered forwarding state
[   58.330289] uniphy autoneg time out!
[   68.512664] nss-dp 3a001000.dp1 lan4: PHY Link up speed: 100
[   68.512829] br-vlan: port 1(lan4) entered blocking state
[   68.517414] br-vlan: port 1(lan4) entered forwarding state
[   68.523387] IPv6: ADDRCONF(NETDEV_CHANGE): br-vlan: link becomes ready
[  292.766785] nss-dp 3a007000.dp6-syn 10g-2: PHY Link is down
[  292.767066] br-lan: port 2(10g-2) entered disabled state
[  298.846625] nss-dp 3a001800.dp5 10g-1: PHY Link is down
[  298.846905] br-lan: port 1(10g-1) entered disabled state
[  320.415120] nss-dp 3a007000.dp6-syn 10g-2: PHY Link up speed: 1000
[  320.415279] br-lan: port 2(10g-2) entered blocking state
[  320.420218] br-lan: port 2(10g-2) entered forwarding state
[  347.038941] nss-dp 3a007000.dp6-syn 10g-2: PHY Link is down
[  347.039223] br-lan: port 2(10g-2) entered disabled state
[  351.135159] nss-dp 3a007000.dp6-syn 10g-2: PHY Link up speed: 1000
[  351.135279] br-lan: port 2(10g-2) entered blocking state
[  351.140255] br-lan: port 2(10g-2) entered forwarding state
[  373.663025] nss-dp 3a007000.dp6-syn 10g-2: PHY Link is down
[  373.663450] br-lan: port 2(10g-2) entered disabled state
[  377.759283] nss-dp 3a007000.dp6-syn 10g-2: PHY Link up speed: 1000
[  377.759432] br-lan: port 2(10g-2) entered blocking state
[  377.764380] br-lan: port 2(10g-2) entered forwarding state
[  410.463207] nss-dp 3a001800.dp5 10g-1: PHY Link up speed: 1000
[  410.463359] br-lan: port 1(10g-1) entered blocking state
[  410.467958] br-lan: port 1(10g-1) entered forwarding state
[  411.332268] uniphy autoneg time out!

Doesn't work with 2.5G mode either.

nss-dp 3a001800.dp5 10g-1: PHY Link up speed: 2500
br-lan: port 1(10g-1) entered blocking state
br-lan: port 1(10g-1) entered forwarding state
uniphy autoneg time out!

l33tlinuxh4x0r · 2024-02-29T00:59:31.979Z

Do you think that it might work if we use the same firmware for both ports? Just need to figure out which one is the one that is working?

sppmaster · 2024-02-29T01:03:42.405Z

Cannot say right now as we don't know what QNAP did to customize the AQR firmware.
Probably not related to the firmware itself.
But now I just wonder because there were lots of different changes/regressions that affected WAN connectivity. They were eventually fixed but maybe not all of them or maybe a new bug was present.
And I just saw this older post from @rmandrad .

rmandrad:

Anyone getting
[   20.512733] nss-dp 3a001800.dp5 10g-1: PHY Link up speed: 1000
[   20.805954] uniphy autoneg time out!
and router not getting a wan ip address ? this is after the most recent changes like
qualcommax: add addresses to DP nodes

tcpdump shows BOOTP/DHCP requests

if I revert back to a previous version I do get an ip

The fix was on the next post but there are no 100-malibu-phy-* patches in the directory.
Maybe @rmandrad can help as he uses QNAP and his repo has additional patches.

l33tlinuxh4x0r · 2024-02-29T01:38:20.172Z

I'm building a new build to test right now. To build I followed the steps in the openwrt github readme with the exception of the last make command... I do make -j32 V=s (I have 32 threads) anyway it asks if I want to compile something along the lines of NF_CONNTRACK_DSCPREMARK_EXT and last time I did the default n but I just googled it and it sounds important so I enabled it y. Lets hope that this is a fix. I will edit this post with the results after I flash the build.

qosmio · 2024-02-29T01:45:53.650Z

Try deleting patch:

package/kernel/mac80211/patches/nss/ath11k/188-ath11k-m3-ssr-dump-collection.patch

If that still fails to boot, you can try working backwards with minimal amount of patches. Should get you basic NSS wifi offloading.

make package/mac80211/{clean,prepare} QUILT=1 V=s
cd build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq807x/mac80211-regular/backports-6.6.15

Then replace patches/series file with the following

gist.github.com

https://gist.github.com/qosmio/b7543126e039b31153e018c14e1a9fed

series.c

build/000-fix_kconfig.patch
build/001-fix_build.patch
build/002-change_allconfig.patch
build/003-remove_bogus_modparams.patch
build/004-fix-kconf-compiling.patch
build/012-kernel_build_check.patch
build/060-no_local_ssb_bcma.patch
build/070-remove-broken-wext-select.patch
build/080-resv_start_op.patch
build/090-bcma-otp.patch

This file has been truncated. show original

quilt push -a
cd ../../../../../
make package/mac80211/compile -j$(nproc) V=s

shi05275 · 2024-02-29T01:48:00.427Z

Thanks for your reply, I will try it now.

sppmaster · 2024-02-29T01:55:26.351Z

If still doesn't work try with this patch.

l33tlinuxh4x0r · 2024-02-29T02:29:58.803Z

tired that patch and still no go.

zxlhhyccc · 2024-02-29T04:56:47.467Z

qosmio:

If that still fails to boot, you can try working backwards with minimal amount of patches. Should get you basic NSS wifi offloading.

AX6 Using the latest commit compiled firmware, the lights on the network port cannot automatically light up. You need to manually add LED configuration to work properly. How can I solve this problem?

TomCruise · 2024-02-29T07:24:06.980Z

@qosmio , sqm-script-nss is spamming the log when you turn off the SQM. It's still going nonstop until you turn SQM back on.

image1122×718 12 KB

T4keT4ke · 2024-02-29T07:40:10.114Z

Had the same problem with qosmios build with my AX3600. Switched to AgustinLorenzos but ditched my original config and started from scratch. Works like a charm now.

qosmio · 2024-02-29T08:14:36.490Z

Are building off the latest commit?

github.com/qosmio/sqm-scripts-nss

bugfix: incorrectly specified device for deletion

committed 08:33PM - 28 Feb 24 UTC

+11 -11

Incorrectly specified IFACE ('wan') as virtual device when running sqm stop. The… order show be flipped.

It was due to a mix up with the device deletion during whenever the instance was stopped/restarted.

TomCruise · 2024-02-29T08:54:55.725Z

Yea the latest one fixes it, thanks.

shi05275 · 2024-02-29T14:29:00.516Z

hi buddy,I tried removing this patch 188-ath11k-m3-ssr-dump-collection.patch,fail to boot.This is logs:


[   10.077523] Backport generated by backports.git 193becf2
[   10.090970] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   10.131763] NET: Registered PF_QIPCRTR protocol family
[   10.147759] xt_time: kernel timezone is -0000
[   10.185835] nss_cryptoapi_attach_user[2236]:ffffffc000de5100: AEAD registration failed(authenc(hmac(sha1),cbc(aes)))
[   10.185893] nss_cryptoapi_attach_user[2236]:ffffffc000de5100: AEAD registration failed(authenc(hmac(sha256),cbc(aes)))
[   10.195472] nss_cryptoapi_attach_user[2236]:ffffffc000de5100: AEAD registration failed(authenc(hmac(sha384),cbc(aes)))
[   10.196133] ath11k c000000.wifi: ipq6018 hw1.0
[   10.205954] nss_cryptoapi_attach_user[2236]:ffffffc000de5100: AEAD registration failed(authenc(hmac(sha512),cbc(aes)))
[   10.216640] ath11k c000000.wifi: FW memory mode: 0
[   10.221067] nss_cryptoapi_attach_user[2236]:ffffffc000de5100: AEAD registration failed(authenc(hmac(sha1),cbc(des3_ede)))
[   10.232044] remoteproc remoteproc0: powering up cd00000.remoteproc
[   10.236559] nss_cryptoapi_attach_user[2236]:ffffffc000de5100: AEAD registration failed(authenc(hmac(sha256),cbc(des3_ede)))
[   10.248028] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[   10.253781] nss_cryptoapi_attach_user[2236]:ffffffc000de5100: AEAD registration failed(seqiv(rfc4106(gcm(aes))))
[   11.378614] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[   11.379912] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[   11.380381] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.385668] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[   11.398134] ath11k c000000.wifi: fw_version 0x240286d2 fw_build_timestamp 2021-05-05 02:32 fw_build_id WLAN.HK.2.4.0.1-01746-QCAHKSWPL_SILICONZ-1
[   11.537442] Unable to handle kernel read from unreadable memory at virtual address 0000000000000000
[   11.537488] Mem abort info:
[   11.545304]   ESR = 0x0000000096000005
[   11.548077]   EC = 0x25: DABT (current EL), IL = 32 bits
[   11.551900]   SET = 0, FnV = 0
[   11.557363]   EA = 0, S1PTW = 0
[   11.560227]   FSC = 0x05: level 1 translation fault
[   11.563269] Data abort info:
[   11.568128]   ISV = 0, ISS = 0x00000005
[   11.571254]   CM = 0, WnR = 0
[   11.574811] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000474c2000
[   11.577944] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[   11.584372] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[   11.592869] Modules linked in: ath11k_ahb ath11k nft_fib_inet nf_flow_table_inet mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TPROXY xt_TCPMSS xt_REDIRECT xt_MASQUERADE xt_LOG qrtr_tun qrtr_smd qrtr_mhi qrtr qmi_helpers ppp_async nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_fullcone nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_compat nft_chain_nat nf_tproxy_ipv6 nf_tproxy_ipv4 nf_tables nf_reject_ipv4 nf_log_syslog nf_flow_table nf_conntrack_netlink mhi libcrc32c l2tp_ppp iptable_nat iptable_mangle iptable_filter ip_tables crc_ccitt compat sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact qca_nss_tunipip6 qca_nss_tun6rd pwm_fan hwmon qca_nss_cfi_cryptoapi qca_nss_crypto qca_nss_qdisc qca_nss_wifi_meshmgr
[   11.593137]  qca_nss_vxlanmgr qca_nss_pptp pptp qca_nss_pppoe pppoe pppox qca_nss_map_t qca_nss_lag_mgr qca_nss_l2tpv2 ppp_generic slhc qca_nss_gre qca_nss_bridge_mgr qca_nss_vlan xt_FULLCONENAT xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ipmac ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_nat nf_conntrack nf_defrag_ipv4 ip6t_NPT ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 qca_mcs bonding ip6_gre ip_gre gre ifb nat46 nf_defrag_ipv6 sit qca_nss_drv ip6_tunnel tunnel6 tunnel4 tun ntfs autofs4 nls_utf8 nls_iso8859_1 nls_cp437 vxlan seqiv michael_mic usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd qca_nss_dp qca_ssdk gpio_button_hotplug vfat fat ext4
[   11.664290]  mbcache jbd2 exfat crc32c_generic
[   11.773769] CPU: 2 PID: 52 Comm: kworker/u8:2 Not tainted 6.1.79 #0
[   11.778112] Hardware name: GL Technologies, Inc. AXT1800 (DT)
[   11.784277] Workqueue: ath11k_qmi_driver_event ath11k_qmi_deinit_service [ath11k]
[   11.790181] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   11.797643] pc : ath11k_dbring_buf_cleanup+0xcfc/0x1230 [ath11k]
[   11.804414] lr : ath11k_wmi_cmd_init+0x64/0x570 [ath11k]
[   11.810662] sp : ffffffc008fc3b40
[   11.815952] x29: ffffffc008fc3b40 x28: dead000000000100 x27: dead000000000122
[   11.819173] x26: ffffff8007300000 x25: ffffff8007300168 x24: ffffff8007310000
[   11.826290] x23: ffffff8007300018 x22: ffffff80073010a0 x21: ffffff800730bf60
[   11.833409] x20: ffffff8007300000 x19: ffffff8007300000 x18: 0000000000005cf8
[   11.840526] x17: 00000000000014b8 x16: 00000000000014a0 x15: 0000000000005f00
[   11.847645] x14: 0000000000001480 x13: 0000000000000001 x12: 0000000000000000
[   11.854763] x11: 0000000000000002 x10: 0000000000000000 x9 : 0000000000000000
[   11.861880] x8 : ffffffc008fc3cd0 x7 : 0000000000000000 x6 : 000000000000003f
[   11.868998] x5 : 0000000000000000 x4 : 0000000000000002 x3 : ffffff8007310000
[   11.876116] x2 : 0000000000000000 x1 : ffffffc008fc3bc4 x0 : ffffff8007300000
[   11.883235] Call trace:
[   11.890345]  ath11k_dbring_buf_cleanup+0xcfc/0x1230 [ath11k]
[   11.892607]  ath11k_core_qmi_firmware_ready+0x190/0x5b0 [ath11k]
[   11.898510]  ath11k_qmi_deinit_service+0x11c4/0x192c [ath11k]
[   11.904500]  process_one_work+0x1f0/0x360
[   11.910139]  worker_thread+0x70/0x430
[   11.914131]  kthread+0x108/0x114
[   11.917775]  ret_from_fork+0x10/0x20
[   11.921079] Code: b9509804 d503233f f9616865 d37df042 (b86268a2)
[   11.924640] ---[ end trace 0000000000000000 ]---
[   11.930627] Kernel panic - not syncing: Oops: Fatal exception
[   11.935317] SMP: stopping secondary CPUs
[   11.940959] Kernel Offset: disabled
[   11.944946] CPU features: 0x00000,00010000,0000400b
[   11.948161] Memory Limit: none
[   12.553060] Rebooting in 1 seconds..

When I use basic NSS wifi offloading,also fail to boot,This is log:

[    9.861208]
[    9.866723] ffffffc000b50d40: NSS core 0 DDR from 40000000 to 41000000
[    9.877197] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    9.882067] nat46: module (version 1182f30785e4274913f01a8c3d7e1b5437ae3819) loaded.
[    9.885327] gre: GRE over IPv4 demultiplexor driver
[    9.891295] ip_gre: GRE over IPv4 tunneling driver
[    9.898882] ip6_gre: GRE over IPv6 tunneling driver
[    9.900112] ffffffc000b50d40: nss core 0 booted successfully
[    9.907395] QCA multicast snooping installed successfully
[    9.952513] xt_FULLCONENAT: RFC3489 Full Cone NAT module
[    9.952513] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang <tech@chionlab.moe>
[    9.954971] nss_vlan_mgr_init_module[1926]:Module (Build Build Id: 02/29/24, 14:14:06) loaded
[    9.971840] PPP generic driver version 2.4.2
[    9.984434] NET: Registered PF_PPPOX protocol family
[    9.988434] PPTP driver version 0.8.5
[    9.998524] nss_wifi_meshmgr_init_module[1997]:Module Build Id: 02/29/24, 14:14:12 loaded
[   10.005359] <NSS-CRYPTO>:module loaded Build_ID - 02/29/24, 14:13:45 SoC=ipq60xx
[   10.018938] GACT probability on
[   10.020009] Mirror/redirect action on
[   10.027575] u32 classifier
[   10.027633]     input device check on
[   10.029207]     Actions configured
[   10.051057] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4
[   10.051103] Backport generated by backports.git 193becf2
[   10.064293] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   10.107026] NET: Registered PF_QIPCRTR protocol family
[   10.125335] xt_time: kernel timezone is -0000
[   10.158376] nss_cryptoapi_attach_user[2236]:ffffffc000de8100: AEAD registration failed(authenc(hmac(sha1),cbc(aes)))
[   10.158432] nss_cryptoapi_attach_user[2236]:ffffffc000de8100: AEAD registration failed(authenc(hmac(sha256),cbc(aes)))
[   10.168054] nss_cryptoapi_attach_user[2236]:ffffffc000de8100: AEAD registration failed(authenc(hmac(sha384),cbc(aes)))
[   10.178643] nss_cryptoapi_attach_user[2236]:ffffffc000de8100: AEAD registration failed(authenc(hmac(sha512),cbc(aes)))
[   10.179188] ath11k c000000.wifi: ipq6018 hw1.0
[   10.189174] nss_cryptoapi_attach_user[2236]:ffffffc000de8100: AEAD registration failed(authenc(hmac(sha1),cbc(des3_ede)))
[   10.199834] ath11k c000000.wifi: FW memory mode: 0
[   10.204275] nss_cryptoapi_attach_user[2236]:ffffffc000de8100: AEAD registration failed(authenc(hmac(sha256),cbc(des3_ede)))
[   10.215618] remoteproc remoteproc0: powering up cd00000.remoteproc
[   10.220152] nss_cryptoapi_attach_user[2236]:ffffffc000de8100: AEAD registration failed(seqiv(rfc4106(gcm(aes))))
[   10.231486] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[   11.353083] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[   11.354343] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[   11.354818] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.360132] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff
[   11.372554] ath11k c000000.wifi: fw_version 0x240286d2 fw_build_timestamp 2021-05-05 02:32 fw_build_id WLAN.HK.2.4.0.1-01746-QCAHKSWPL_SILICONZ-1
[   11.725980] ath11k c000000.wifi: nss init soc nss if_num 203 userpd_id 0
[   14.758165] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[   18.562647] ECM init
[   18.562731] ECM database jhash random seed: 0xbd509daf
[   18.603869] ECM init complete
[   19.530241] br-lan: port 1(eth1) entered blocking state
[   19.530300] br-lan: port 1(eth1) entered disabled state
[   19.535178] device eth1 entered promiscuous mode
[   19.551646] br-lan: port 2(eth2) entered blocking state
[   19.551708] br-lan: port 2(eth2) entered disabled state
[   19.556379] device eth2 entered promiscuous mode
[   20.447973] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[   20.873778] br-lan: port 3(phy1-ap0) entered blocking state
[   20.873828] br-lan: port 3(phy1-ap0) entered disabled state
[   20.879910] device phy1-ap0 entered promiscuous mode
[   20.880640] Unable to handle kernel read from unreadable memory at virtual address 0000000020000018
[   20.885321] br-lan: port 3(phy1-ap0) entered blocking state
[   20.888941] Mem abort info:
[   20.888945]   ESR = 0x0000000096000005
[   20.888949]   EC = 0x25: DABT (current EL), IL = 32 bits
[   20.888955]   SET = 0, FnV = 0
[   20.888958]   EA = 0, S1PTW = 0
[   20.888961]   FSC = 0x05: level 1 translation fault
[   20.888965] Data abort info:
[   20.897717] br-lan: port 3(phy1-ap0) entered forwarding state
[   20.903250]   ISV = 0, ISS = 0x00000005
[   20.903253]   CM = 0, WnR = 0
[   20.903257] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000051b5c000
[   20.903263] [0000000020000018] pgd=08000000507be003, p4d=08000000507be003, pud=08000000507be003, pmd=0000000000000000
[   20.948058] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[   20.958646] Modules linked in: ecm ath11k_ahb ath11k nft_fib_inet nf_flow_table_inet mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TPROXY xt_TCPMSS xt_REDIRECT xt_MASQUERADE xt_LOG qrtr_tun qrtr_smd qrtr_mhi qrtr qmi_helpers ppp_async nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_fullcone nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_compat nft_chain_nat nf_tproxy_ipv6 nf_tproxy_ipv4 nf_tables nf_reject_ipv4 nf_log_syslog nf_flow_table nf_conntrack_netlink mhi libcrc32c l2tp_ppp iptable_nat iptable_mangle iptable_filter ip_tables crc_ccitt compat sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact qca_nss_tunipip6 qca_nss_tun6rd pwm_fan hwmon qca_nss_cfi_cryptoapi qca_nss_crypto qca_nss_qdisc
[   20.958931]  qca_nss_wifi_meshmgr qca_nss_vxlanmgr qca_nss_pptp pptp qca_nss_pppoe pppoe pppox qca_nss_map_t qca_nss_lag_mgr qca_nss_l2tpv2 ppp_generic slhc qca_nss_gre qca_nss_bridge_mgr qca_nss_vlan xt_FULLCONENAT xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ipmac ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_nat nf_conntrack nf_defrag_ipv4 ip6t_NPT ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 qca_mcs bonding ip6_gre ip_gre gre ifb nat46 nf_defrag_ipv6 sit qca_nss_drv ip6_tunnel tunnel6 tunnel4 tun ntfs autofs4 nls_utf8 nls_iso8859_1 nls_cp437 vxlan seqiv michael_mic usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd qca_nss_dp qca_ssdk
[   21.028521]  gpio_button_hotplug vfat fat ext4 mbcache jbd2 exfat crc32c_generic
[   21.136855] CPU: 0 PID: 2974 Comm: mac80211.sh Not tainted 6.1.79 #0
[   21.144230] Hardware name: GL Technologies, Inc. AXT1800 (DT)
[   21.150567] pstate: 004000c5 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   21.156210] pc : collect_posix_cputimers+0x44/0xf0
[   21.162977] lr : posix_cpu_timers_work+0x94/0x470
[   21.167838] sp : ffffffc00ae83c40
[   21.172609] x29: ffffffc00ae83c40 x28: ffffff800f393200 x27: ffffffc00ae83d08
[   21.175915] x26: 0000000000000000 x25: 0000000000000001 x24: ffffff800f393200
[   21.183034] x23: 000000000ac9d740 x22: ffffff800f3937d8 x21: ffffff800f393954
[   21.190152] x20: ffffffc00ae83cf8 x19: 0000000020000000 x18: 0000000000000000
[   21.197269] x17: ffffffc0372e3000 x16: ffffffc008000000 x15: 0000000000000000
[   21.204386] x14: 000000000000013e x13: 0000000000000001 x12: 0000000000000001
[   21.211505] x11: ffffff803fd9da40 x10: ffffffc008bbdeb8 x9 : ffffffc008ba8a98
[   21.218624] x8 : 00000004dc8b8400 x7 : 7fffffffffffffff x6 : 000000002da972a4
[   21.225741] x5 : 000000000aecb3e4 x4 : 00000000090013c0 x3 : 000000000ac9d740
[   21.232859] x2 : ffffffc00ae83cf8 x1 : ffffffc00ae83d08 x0 : ffffff800f3937d8
[   21.239978] Call trace:
[   21.247087]  collect_posix_cputimers+0x44/0xf0
[   21.249348]  posix_cpu_timers_work+0x94/0x470
[   21.253860]  task_work_run+0x80/0xb0
[   21.258286]  do_notify_resume+0x4b8/0x83c
[   21.261933]  el0_interrupt+0x9c/0xb0
[   21.265837]  __el0_irq_handler_common+0x18/0x24
[   21.269486]  el0t_64_irq_handler+0x10/0x20
[   21.273738]  el0t_64_irq+0x174/0x178
[   21.277910] Code: d5384118 f9400ad3 f87a7b77 b40004d3 (f9400e60)
[   21.281644] ---[ end trace 0000000000000000 ]---
[   21.287631] Kernel panic - not syncing: Oops: Fatal exception
[   21.292319] SMP: stopping secondary CPUs
[   22.381292] SMP: failed to stop secondary CPUs 0-1
[   22.381313] Kernel Offset: disabled
[   22.384959] CPU features: 0x00000,00010000,0000400b
[   22.388349] Memory Limit: none
[   22.993248] Rebooting in 3 seconds..

qosmio · 2024-02-29T19:13:53.795Z

shi05275:

[   11.398134] ath11k c000000.wifi: fw_version 0x240286d2 fw_build_timestamp 2021-05-05 02:32 fw_build_id WLAN.HK.2.4.0.1-01746-QCAHKSWPL_SILICONZ-1

Can you try building with newer firmware?

github.com

//github.com/quic/upstream-wifi-fw/tree/main/ath11k-firmware/IPQ6018/hw1.0/2.7.0.1/WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1