Qualcomm Atheros QCA9984 802.11ac/n missing

Greetings, I have a NETGEAR Orbi RBR50 and two NETGEAR Orbi RBS50s

I was running 22.03.5 on all of them. Managed to flash 23.05.3 on all of them by trying to flash via sysupgrade, which put me back into one of the NETGEAR boot environments with Telnet available so I could confirm boot partition 2, and then flashed 23.05.3 using factory images on them. One of the RBS50s is missing Qualcomm Atheros QCA9984 802.11ac/n from the Wireless Overview. If I look at the Kernel Log I don't see anything similar to the following like I do on the other devices:

[    9.466762] urngd: v1.0.2 started.
[    9.617217] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[    9.617294] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[    9.630414] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7ea63dc5

Any suggestions on how to look into this further?