I have been using the config from this post for a while to detect BIOS and UEFI PXE clients and direct them to the correct file. When I upgraded to OpenWRT 23.05, however, this stopped working; the PXE clients would report that no file was offered to them at all. If I remove this logic and just have…

PXE Legacy and EFI

frollic January 18, 2024, 5:00pm 2

PXE legacy & uefi config Installing and Using OpenWrt

Hi! use OpenWrt 22.03.5 I need config DHCP settings in /etc/config/dhcp for other PXE server, i add - config boot 'linux' option filename 'pxelinux.0' option serveraddress '10.10.10.13' option servername 'pxe' and it works fine with virtual and old hardware pc but not with new uefi hardware what is the actual syntax for 22.03 openwrt in debian manual dnsmasq: https://wiki.debian.org/PXEBootInstall pxe-service=x86PC, "PXELINUX (BIOS)", "pxelinux.0" pxe-service=X86-64_EFI,"PXE (UEF…

UEFI PXE boot server on OpenWrt Installing and Using OpenWrt

Now that I've resolved the few frustrations I had with roaming and IPv6 on the router and WireGaurd on my personal Linux machine, I'm ready for my next "adventure". I actually have been eyeing network boot for quite a while. I do occasionally need to boot different OSes, and since I have a 64GB flash and an RT3200 with a USB port, I would like to give PXE booting a go. I've never used PXE boot let alone configure a server, so before going any further, a couple questions: will it work with UEFI?…

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled