I am getting "WARNING: netperf returned errors. Results may be inaccurate" when I try running speedtest-netperf.sh. If I ssh into my friend's system, I can run the script using the same switches and it does not end in errors. How can I debug?
speedtest-netperf.sh -p 1.1.1.1 --sequential -t 30
2020-11-24 14:02:16 Starting speedtest for 30 seconds per transfer session.
Measure speed to netperf.bufferbloat.net (IPv4) while pinging 1.1.1.1.
Download and upload sessions are sequential, each with 5 simultaneous streams.
..................................................................................................................................
WARNING: netperf returned errors. Results may be inaccurate!
Download: 0.00 Mbps
Latency: [in msec, 97 pings, 0.00% packet loss]
Min: 22.600
10pct: 23.300
Median: 24.500
Avg: 24.956
90pct: 26.000
Max: 33.000
netperf: 0.3
..................................................................................................................................
WARNING: netperf returned errors. Results may be inaccurate!
Upload: 0.00 Mbps
Latency: [in msec, 102 pings, 0.00% packet loss]
Min: 22.500
10pct: 23.400
Median: 24.300
Avg: 24.550
90pct: 25.500
Max: 31.700
netperf: 0.3