Problem with my router

Installing and Using OpenWrt Network and Wireless Configuration
1

I have a Belkin ax 3200 router, I have problems because when the router turns off and I turn it on again, it is very difficult to get the Internet and emit a Wi-Fi signal. The light keeps flashing and I have to turn it off and on many times for it to catch and emit a Wi-Fi signal. And sometimes it turns on normally but it doesn't let me enter 192.168.1.1. I need help please

[Moderator edit: added English translatoin]

Tengo un router Belkin ax 3200, presento problemas ya que el router cuando se apaga y vuelvo a prenderlo cuesta mucho que agarre Internet y emita señal wifi. Se queda la luce cita parpadeando y tengo que apagarlo y prenderlo muchas veces para que agarre y emita señal wifi. Y aveces prende normal pero no me deja ingresar al 192.168.1.1. Necesito ayuda por favor

2

Does your device run OpenWrt? If so, connect using ethernet and then provide the following information:

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:
grafik
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall

Also, please post in English. You may also include your native language, but English is the primary language for this forum. It is fine to use an online translator.

1 Like
3

No, I have the original router software and I have been researching how to use openwrt to make my router better

4

Then why are you asking for help from openwrt maintainers\users?
If you are experiencing problems with a firmware, you should ask the providers of said firmware for help.

1 Like
5

Then you should install Openwrt before you ask your questions.

https://openwrt.org/toh/linksys/e8450

1 Like