Problem installing my latest update open wrt 19.07.1 on Archer D50 V1
error code 4503
Have you tried flashing via TFTP (U-Boot + UART) as described in the installation instructions?
Are you trying to flash 19.07.1 from factory; or sysupgrade an already installed OpenWrt version?
Then:
- Why do you keep using the web GUI?
- Did you follow the instructions linked in by @tmomas in Post No. 2?
- Can you show us the serial output, in addition to the TFTP results?
يرجى الرجوع إلى الإرشادات في المنشور 2.
لم استطع استعمال tftp
tftp not working in look to laste image uploade
mode set to octet
(to) 192.168.1.1
Connected to 192.168.1.1 (192.168.1.1), port 69
tftp> put
(file) ArcherD50v1_tp_recovery.bin
putting ArcherD50v1_tp_recovery.bin to 192.168.1.1:ArcherD50v1_tp_recovery.bin [octet]
Transfer timed out.
tftp>
Again, please show serial output accompanying your failed TFTP report.
يرجى إظهار الاتصال التسلسلي الناتج.
ﻻيضهر شيئ
Nothing is shown
لقد جربت
I have tried
192.168.0.66
192.168.1.66
and I have tried
curl -T code.bin tftp://192.168.1.1
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 4352k 0 0 0 0 0 0 --:--:-- 0:04:59 --:--:-- 0
0 4352k 0 0 0 0 0 0 --:--:-- 0:04:59 --:--:-- 0
curl: (28) TFTP response timeout
???
curl != serial
Do you have a serial data connection?
هل لديك اتصال بيانات تسلسلي؟
Please clearly explain your steps, beginning with connecting the serial cable.
yes i have
نعم لدي ممكن شرح الطريقة
- Can you show us the output of the serial connection, please?
- Can you tell us about your steps to connect the serial cable to the router?