Predator W6x stuck on hard boot loop help

Installing and Using OpenWrt
1

my router keep rebooting with this after installing and now i cant do anything with the router: Core: 27 devices, 14 uclasses, devicetree: embed
Loading Environment from UBI... spi-nand: spi_nand spi_nand@0: WINBOND W25N02KV SPI NAND was found.
spi-nand: spi_nand spi_nand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
"Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeeafffffe
elr: 0000000041e2c868 lr : 0000000041e2bc1c (reloc)
elr: 000000007ff6a868 lr : 000000007ff69c1c
x0 : eafffffeeafffffe x1 : 000000007fb20be0
x2 : eafffffeeafffffe x3 : eafffffeeafffffe
x4 : 000000007ffe1598 x5 : 000000007fb20f80
x6 : 000000007ffe15a8 x7 : 000000007fb43000
x8 : 0000000000000230 x9 : fffffffffffffff0
x10: 000000000000000d x11: 0000000000000006
x12: 0000000000000000 x13: 000000007ffd9f00
x14: 00000000fffffff9 x15: 0000000000000000
x16: 000000007ff842c8 x17: 0000000000000000
x18: 000000007f7ffe10 x19: 000000007fb20a60
x20: 0000000000000000 x21: 000000007fb202a0
x22: 000000007fb202a0 x23: 000000007fb21700
x24: 000000007fb20be0 x25: 000000007fb20a60
x26: 0000000000000000 x27: 000000007fb20be0
x28: 000000007fb20ec0 x29: 000000007f7c1a00

Code: f9400442 aa000043 b4000483 b40002a0 (f9400003)
Resetting CPU ...

resetting ...

F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 01A8 [010F]
Jump to BL

NOTICE: BL2: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE: BL2: Built : 11:21:21, Apr 19 2026
NOTICE: WDT: [40000000] Software reset (reboot)
NOTICE: CPU: MT7986 (2000MHz)
NOTICE: EMI: Using DDR4 settings
NOTICE: EMI: complex R/W mem test passed
NOTICE: DRAM: 1024MB
NOTICE: SPI-NAND probed by CASN page
NOTICE: SPI-NAND: WINBOND W25N02KV (256MB)
NOTICE: SPI-NAND: Page size: 2KB+128, Block size: 128KB
NOTICE: BL2: Booting BL31
NOTICE: BL31: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE: BL31: Built : 11:21:21, Apr 19 2026

i have also done this with UART:mtk_uartboot.exe -s COM5 -a -p mt7986-ram-ddr4-bl2.bin -f bl31.bin && putty.exe -serial COM5 -sercfg 115200,8,n,1,N

but i csnt get a button press in as it never loads anything up

2

What button press ?

3

i have tried 0, ctrl c and enter

4

Didn't ask about which buttons you had pressed...

5

sorry i assumed thats what you asked

6

I see now, I assumed you meant physical button on the device, but you mean on your keyboard ?

There's however a syntax error in your mtk_uartboot command.

7

aahhh okay i get it, i have managed to get it into MT7986> now but as soon as i turn it off again to put it back to its spot it goes back into the boot cycle it only happened when i tried to install Openwrt Ubootmod Layout

8

mtk_uartboot doesn't flash anything.

If you power cycle, you have to rerun it.

9

okay so im guessing i have to just follow the steps from the Revert to OEM Firmware? i also cant seem to find my backups

10

Why ?

Simply follow https://openwrt.org/toh/acer/predator_connect_w6x#openwrt_ubootmod_layout, and you'll be fine.

11

im getting everything installed but as soon as i power the router off im back in the same situation, as it doesnt get upto the u-boot part and keeps rebooting again

12

same error message as before ?

post the whole flash sequence.

use </> button on top of the edit window, when you paste the text.

13 
  root@OpenWrt:~# ubus call system board
{
        "kernel": "6.12.80",
        "hostname": "OpenWrt",
        "system": "ARMv8 Processor rev 4",
        "model": "Acer Predator Connect W6x (OpenWrt U-Boot Layout)",
        "board_name": "acer,predator-w6x-ubootmod",
        "rootfs_type": "initramfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "SNAPSHOT",
                "firmware_url": "https://downloads.openwrt.org/",
                "revision": "r34059-a8d5544c83",
                "target": "mediatek/filogic",
                "description": "OpenWrt SNAPSHOT r34059-a8d5544c83",
                "builddate": "1776676386"
        }
}
root@OpenWrt:~# mount
tmpfs on / type tmpfs (rw,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,noatime)
bpffs on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mode=700)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,noatime)
root@OpenWrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
tmpfs                   492.7M     23.7M    468.9M   5% /
tmpfs                   492.7M    324.0K    492.4M   0% /tmp
tmpfs                   512.0K         0    512.0K   0% /dev
root@OpenWrt:~#
root@OpenWrt:~# root@OpenWrt:~# ubus call system board
-ash: root@OpenWrt:~#: not found
root@OpenWrt:~# {
>         "kernel": "6.12.80",
>         "hostname": "OpenWrt",
>         "system": "ARMv8 Processor rev 4",
>         "model": "Acer Predator Connect W6x (OpenWrt U-Boot Layout)",
>         "board_name": "acer,predator-w6x-ubootmod",
>         "rootfs_type": "initramfs",
>         "release": {
>                 "distribution": "OpenWrt",
>                 "version": "SNAPSHOT",
>                 "firmware_url": "https://downloads.openwrt.org/",
>                 "revision": "r34059-a8d5544c83",
>                 "target": "mediatek/filogic",
>                 "description": "OpenWrt SNAPSHOT r34059-a8d5544c83",
>                 "builddate": "1776676386"
>         }
-ash: kernel:: not found
-ash: hostname:: not found
-ash: system:: not found
-ash: model:: not found
-ash: board_name:: not found
-ash: rootfs_type:: not found
-ash: release:: not found
-ash: distribution:: not found
-ash: version:: not found
-ash: firmware_url:: not found
t@Op-ash: revision:: not found
-ash: target:: not found
-ash: description:: not found
-ash: builddate:: not found
root@OpenWrt:~# }
-ash: syntax error: unexpected "}"
root@OpenWrt:~# root@OpenWrt:~# mount
-ash: root@OpenWrt:~#: not found
root@OpenWrt:~# tmpfs on / type tmpfs (rw,relatime)
-ash: syntax error: unexpected "("
root@OpenWrt:~# proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
-ash: syntax error: unexpected "("
root@OpenWrt:~# sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
-ash: syntax error: unexpected "("
root@OpenWrt:~# cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,r
elatime,nsdelegate)
-ash: syntax error: unexpected "("
root@OpenWrt:~# tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
-ash: syntax error: unexpected "("
root@OpenWrt:~# tmpfs on /dev type tmpfs (rw,nosuid,noexec,noatime,size=512k,mod
e=755)
-ash: syntax error: unexpected "("
root@OpenWrt:~# devpts on /dev/pts type devpts (rw,nosuid,noexec,noatime,mode=60
0,ptmxmode=000)
-ash: syntax error: unexpected "("
root@OpenWrt:~# debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexe
c,noatime)
-ash: syntax error: unexpected "("
root@OpenWrt:~# bpffs on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,noatime,mo
de=700)
-ash: syntax error: unexpected "("
root@OpenWrt:~# pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,noa
time)
-ash: syntax error: unexpected "("
root@OpenWrt:~# root@OpenWrt:~# df -h
-ash: root@OpenWrt:~#: not found
root@OpenWrt:~# Filesystem                Size      Used Available Use% Mounted
on
-ash: Filesystem: not found
root@OpenWrt:~# tmpfs                   492.7M     23.7M    468.9M   5% /
-ash: tmpfs: not found
root@OpenWrt:~# tmpfs                   492.7M    324.0K    492.4M   0% /tmp
-ash: tmpfs: not found
root@OpenWrt:~# tmpfs                   512.0K         0    512.0K   0% /dev
-ash: tmpfs: not found
root@OpenWrt:~# root@OpenWrt:~#
-ash: root@OpenWrt:~#: not found
root@OpenWrt:~# sysupgrade -n /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ub
ootmod-squashfs-sysupgrade.itb
Thu Jan  1 00:13:13 GMT 1970 upgrade: Image metadata not present
Thu Jan  1 00:13:13 GMT 1970 upgrade: Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Invalid image type.
Image check failed.
root@OpenWrt:~# ^C

root@OpenWrt:~# ls -lh /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-
squashfs-sysupgrade.itb
ls: /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-squashfs-sysupgrade.itb: No such file or directory
root@OpenWrt:~# file /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-sq
uashfs-sysupgrade.itb
-ash: file: not found
root@OpenWrt:~# ^C

root@OpenWrt:~# ls -lh /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-
squashfs-sysupgrade.itb
ls: /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-squashfs-sysupgrade.itb: No such file or directory
root@OpenWrt:~# Watchdog handover: fd=3
- watchdog -
Watchdog does not have CARDRESET support
Thu Jan  1 00:28:27 GMT 1970 upgrade: Sending TERM to remaining processes ...
Thu Jan  1 00:28:27 GMT 1970 upgrade: Sending signal TERM to sleep (4947)
Thu Jan  1 00:28:31 GMT 1970 upgrade: Sending KILL to remaining processes ...
<6>[ 1717.520485] stage2 (5019): drop_caches: 3
Thu Jan  1 00:28:37 GMT 1970 upgrade: Switching to ramdisk...
Thu Jan  1 00:28:38 UTC 1970 upgrade: Performing system upgrade...
fitblk: /dev/fit0 released
<6>[ 1718.627900] block ubiblock0_2: released
<6>[ 1718.973975] block ubiblock0_2: created from ubi0:2(fit)
Volume ID 2, size 92 LEBs (11681792 bytes, 11.1 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "fit", alignment 1
Set volume size to 185131008
Volume ID 4, size 1458 LEBs (185131008 bytes, 176.5 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1
sysupgrade successful
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource <6>[ 1721.760267] mt7530-mdio mdio-bus:1f lan2: Link is Down
busy
<6>[ 1721.766940] mt7530-mdio mdio-bus:1f lan1: Link is Down
<6>[ 1721.772663] br-lan: port 4(lan4) entered disabled state
<6>[ 1721.778205] br-lan: port 3(lan3) entered disabled state
<6>[ 1721.783717] br-lan: port 2(lan2) entered disabled state
<6>[ 1721.789259] br-lan: port 1(lan1) entered disabled state
<6>[ 1721.796744] mtk_soc_eth 15100000.ethernet eth0: Link is Down
<0>[ 1721.803487] reboot: Restarting system

F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 01A8 [010F]
Jump to BL

NOTICE:  BL2: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL2: Built : 09:13:06, Apr 20 2026
NOTICE:  WDT: [40000000] Software reset (reboot)
NOTICE:  CPU: MT7986 (1998MHz)
NOTICE:  EMI: Using DDR4 settings
NOTICE:  EMI: complex R/W mem test passed
NOTICE:  DRAM: 1024MB
NOTICE:  SPI-NAND probed by CASN page
NOTICE:  SPI-NAND: WINBOND W25N02KV (256MB)
NOTICE:  SPI-NAND: Page size: 2KB+128, Block size: 128KB
NOTICE:  BL2: Booting BL31
NOTICE:  BL31: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL31: Built : 09:13:06, Apr 20 2026


U-Boot 2026.01-OpenWrt-r34059-a8d5544c83 (Apr 20 2026 - 09:13:06 +0000)

CPU:   MediaTek MT7986
Model: Acer Predator Connect W6x
DRAM:  1 GiB
Core:  27 devices, 14 uclasses, devicetree: embed
Loading Environment from UBI... spi-nand: spi_nand spi_nand@0: WINBOND W25N02KV SPI NAND was found.
spi-nand: spi_nand spi_nand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
"Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeeafffffe
elr: 0000000041e2c868 lr : 0000000041e2bc1c (reloc)
elr: 000000007ff6a868 lr : 000000007ff69c1c
x0 : eafffffeeafffffe x1 : 000000007fb20be0
x2 : eafffffeeafffffe x3 : eafffffeeafffffe
x4 : 000000007ffe1598 x5 : 000000007fb20f80
x6 : 000000007ffe15a8 x7 : 000000007fb43000
x8 : 0000000000000230 x9 : fffffffffffffff0
x10: 000000000000000d x11: 0000000000000006
x12: 0000000000000000 x13: 000000007ffd9f00
x14: 00000000fffffff9 x15: 0000000000000000
x16: 000000007ff842c8 x17: 0000000000000000
x18: 000000007f7ffe10 x19: 000000007fb20a60
x20: 0000000000000000 x21: 000000007fb202a0
x22: 000000007fb202a0 x23: 000000007fb21700
x24: 000000007fb20be0 x25: 000000007fb20a60
x26: 0000000000000000 x27: 000000007fb20be0
x28: 000000007fb20ec0 x29: 000000007f7c1a00

Code: f9400442 aa000043 b4000483 b40002a0 (f9400003)
Resetting CPU ...

resetting ...

F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 01A8 [010F]
Jump to BL

NOTICE:  BL2: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL2: Built : 09:13:06, Apr 20 2026
NOTICE:  WDT: [40000000] Software reset (reboot)
NOTICE:  CPU: MT7986 (2000MHz)
NOTICE:  EMI: Using DDR4 settings
NOTICE:  EMI: complex R/W mem test passed
NOTICE:  DRAM: 1024MB
NOTICE:  SPI-NAND probed by CASN page
NOTICE:  SPI-NAND: WINBOND W25N02KV (256MB)
NOTICE:  SPI-NAND: Page size: 2KB+128, Block size: 128KB
NOTICE:  BL2: Booting BL31
NOTICE:  BL31: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL31: Built : 09:13:06, Apr 20 2026


U-Boot 2026.01-OpenWrt-r34059-a8d5544c83 (Apr 20 2026 - 09:13:06 +0000)

CPU:   MediaTek MT7986
Model: Acer Predator Connect W6x
DRAM:  1 GiB
Core:  27 devices, 14 uclasses, devicetree: embed
Loading Environment from UBI... spi-nand: spi_nand spi_nand@0: WINBOND W25N02KV SPI NAND was found.
spi-nand: spi_nand spi_nand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
"Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeeafffffe
elr: 0000000041e2c868 lr : 0000000041e2bc1c (reloc)
elr: 000000007ff6a868 lr : 000000007ff69c1c
x0 : eafffffeeafffffe x1 : 000000007fb20be0
x2 : eafffffeeafffffe x3 : eafffffeeafffffe
x4 : 000000007ffe1598 x5 : 000000007fb20f80
x6 : 000000007ffe15a8 x7 : 000000007fb43000
x8 : 0000000000000230 x9 : fffffffffffffff0
x10: 000000000000000d x11: 0000000000000006
x12: 0000000000000000 x13: 000000007ffd9f00
x14: 00000000fffffff9 x15: 0000000000000000
x16: 000000007ff842c8 x17: 0000000000000000
x18: 000000007f7ffe10 x19: 000000007fb20a60
x20: 0000000000000000 x21: 000000007fb202a0
x22: 000000007fb202a0 x23: 000000007fb21700
x24: 000000007fb20be0 x25: 000000007fb20a60
x26: 0000000000000000 x27: 000000007fb20be0
x28: 000000007fb20ec0 x29: 000000007f7c1a00

Code: f9400442 aa000043 b4000483 b40002a0 (f9400003)
Resetting CPU ...

resetting ...

F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 01A8 [010F]
Jump to BL

NOTICE:  BL2: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL2: Built : 09:13:06, Apr 20 2026
NOTICE:  WDT: [40000000] Software reset (reboot)
NOTICE:  CPU: MT7986 (1998MHz)
NOTICE:  EMI: Using DDR4 settings
NOTICE:  EMI: complex R/W mem test passed
NOTICE:  DRAM: 1024MB
NOTICE:  SPI-NAND probed by CASN page
NOTICE:  SPI-NAND: WINBOND W25N02KV (256MB)
NOTICE:  SPI-NAND: Page size: 2KB+128, Block size: 128KB
NOTICE:  BL2: Booting BL31
NOTICE:  BL31: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL31: Built : 09:13:06, Apr 20 2026


U-Boot 2026.01-OpenWrt-r34059-a8d5544c83 (Apr 20 2026 - 09:13:06 +0000)

CPU:   MediaTek MT7986
Model: Acer Predator Connect W6x
DRAM:  1 GiB
Core:  27 devices, 14 uclasses, devicetree: embed
Loading Environment from UBI... spi-nand: spi_nand spi_nand@0: WINBOND W25N02KV SPI NAND was found.
spi-nand: spi_nand spi_nand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
"Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeeafffffe
elr: 0000000041e2c868 lr : 0000000041e2bc1c (reloc)
elr: 000000007ff6a868 lr : 000000007ff69c1c
x0 : eafffffeeafffffe x1 : 000000007fb20be0
x2 : eafffffeeafffffe x3 : eafffffeeafffffe
x4 : 000000007ffe1598 x5 : 000000007fb20f80
x6 : 000000007ffe15a8 x7 : 000000007fb43000
x8 : 0000000000000230 x9 : fffffffffffffff0
x10: 000000000000000d x11: 0000000000000006
x12: 0000000000000000 x13: 000000007ffd9f00
x14: 00000000fffffff9 x15: 0000000000000000
x16: 000000007ff842c8 x17: 0000000000000000
x18: 000000007f7ffe10 x19: 000000007fb20a60
x20: 0000000000000000 x21: 000000007fb202a0
x22: 000000007fb202a0 x23: 000000007fb21700
x24: 000000007fb20be0 x25: 000000007fb20a60
x26: 0000000000000000 x27: 000000007fb20be0
x28: 000000007fb20ec0 x29: 000000007f7c1a00

Code: f9400442 aa000043 b4000483 b40002a0 (f9400003)
Resetting CPU ...
14

if you look further down on the logs you will see it doing the boot loop

15

I'd like the full sequence starting from mtk_uartboot, until it fails.

16

it limits how much i can put on here, i will try and get it done now with less info, i will turn it off then on :slight_smile: i have the mtk_uartboot on my desktop so i will get it sorted to show you

17 
Using ethernet@15100000 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-initramfs-recovery.itb'.
Load address: 0x46000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################
         1.6 MiB/s
done
Bytes transferred = 9306112 (8e0000 hex)
## Loading kernel (any) from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-6.12.80
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x460000e8
     Data Size:    4612662 Bytes = 4.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x48000000
     Entry Point:  0x48000000
     Hash algo:    crc32
     Hash value:   da804b44
     Hash algo:    sha1
     Hash value:   7d9e51aa793a6a91a097b14d4e08f28e25e59bec
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading ramdisk (any) from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'initrd-1' ramdisk subimage
     Description:  ARM64 OpenWrt acer_predator-w6x-ubootmod initrd
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0x46466464
     Data Size:    4635164 Bytes = 4.4 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: unavailable
     Entry Point:  unavailable
     Hash algo:    crc32
     Hash value:   1a35a47b
     Hash algo:    sha1
     Hash value:   d28f5d59686510e115e6c91a3a384b984f41fb3a
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt (any) from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt acer_predator-w6x-ubootmod device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x468d1f98
     Data Size:    21186 Bytes = 20.7 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   94f69a0f
     Hash algo:    sha1
     Hash value:   06482ce32f0156a9d53683444e77145d955d378c
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x468d1f98
Working FDT set to 468d1f98
   Uncompressing Kernel Image to 48000000
   Loading Ramdisk to 7e394000, end 7e7ffa1c ... OK
   Loading Device Tree to 000000007e38b000, end 000000007e3932c1 ... OK
Working FDT set to 7e38b000
Add 'ramoops@42ff0000' node failed: FDT_ERR_EXISTS

Starting kernel ...

<6>[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
<5>[    0.000000] Linux version 6.12.80 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.3.0 r34059-a8d5544c83) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Mon Apr 20 09:13:06 2026
<4>[    0.000000] KASLR disabled due to lack of seed
<6>[    0.000000] Machine model: Acer Predator Connect W6x (OpenWrt U-Boot Layout)
<6>[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
<6>[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004303ffff (256 KiB) nomap non-reusable secmon@43000000
<6>[    0.000000] OF: reserved mem: 0x000000004fc00000..0x000000004fcfffff (1024 KiB) nomap non-reusable wmcpu-reserved@4fc00000
<6>[    0.000000] OF: reserved mem: 0x000000004fd00000..0x000000004fd3ffff (256 KiB) nomap non-reusable wo-emi@4fd00000
<6>[    0.000000] OF: reserved mem: 0x000000004fd40000..0x000000004fd7ffff (256 KiB) nomap non-reusable wo-emi@4fd40000
<6>[    0.000000] OF: reserved mem: 0x000000004fd80000..0x000000004ffbffff (2304 KiB) nomap non-reusable wo-data@4fd80000
<6>[    0.000000] Zone ranges:
<6>[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
<6>[    0.000000]   DMA32    empty
<6>[    0.000000]   Normal   empty
<6>[    0.000000] Movable zone start for each node
<6>[    0.000000] Early memory node ranges
<6>[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
<6>[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004303ffff]
<6>[    0.000000]   node   0: [mem 0x0000000043040000-0x000000004fbfffff]
<6>[    0.000000]   node   0: [mem 0x000000004fc00000-0x000000004ffbffff]
<6>[    0.000000]   node   0: [mem 0x000000004ffc0000-0x000000007fffffff]
<6>[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
<6>[    0.000000] psci: probing for conduit method from DT.
<6>[    0.000000] psci: PSCIv1.1 detected in firmware.
<6>[    0.000000] psci: Using standard PSCI v0.2 function IDs
<6>[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
<6>[    0.000000] psci: SMC Calling Convention v1.5
<6>[    0.000000] percpu: Embedded 20 pages/cpu s42584 r8192 d31144 u81920
<7>[    0.000000] pcpu-alloc: s42584 r8192 d31144 u81920 alloc=20*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<6>[    0.000000] Detected VIPT I-cache on CPU0
<6>[    0.000000] CPU features: detected: GIC system register CPU interface
<6>[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
<6>[    0.000000] alternatives: applying boot alternatives
<5>[    0.000000] Kernel command line: console=ttyS0,115200n8 console_msg_format=syslog root=/dev/fit0 rootwait
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 262144
<6>[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
<6>[    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
<6>[    0.000000] software IO TLB: area num 4.
<6>[    0.000000] software IO TLB: mapped [mem 0x000000007eb00000-0x000000007ec00000] (1MB)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] rcu: Hierarchical RCU implementation.
<6>[    0.000000]       Tracing variant of Tasks RCU enabled.
<6>[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
<6>[    0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
<6>[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
<6>[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
<6>[    0.000000] GICv3: 640 SPIs implemented
<6>[    0.000000] GICv3: 0 Extended SPIs implemented
<6>[    0.000000] Root IRQ handler: gic_handle_irq
<6>[    0.000000] GICv3: GICv3 features: 16 PPIs
<6>[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
<6>[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
<6>[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
<6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
<6>[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
<6>[    0.000070] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
<6>[    0.000077] pid_max: default: 32768 minimum: 301
<6>[    0.002045] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
<6>[    0.002053] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
<4>[    0.003643] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[    0.004263] rcu: Hierarchical SRCU implementation.
<6>[    0.004265] rcu:  Max phase no-delay instances is 1000.
<6>[    0.004381] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[    0.004593] smp: Bringing up secondary CPUs ...
<6>[    0.004852] Detected VIPT I-cache on CPU1
<6>[    0.004892] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
<6>[    0.004920] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
<6>[    0.005235] Detected VIPT I-cache on CPU2
<6>[    0.005258] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
<6>[    0.005269] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
<6>[    0.005533] Detected VIPT I-cache on CPU3
<6>[    0.005553] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
<6>[    0.005562] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
<6>[    0.005598] smp: Brought up 1 node, 4 CPUs
<6>[    0.005602] SMP: Total of 4 processors activated.
<6>[    0.005604] CPU: All CPU(s) started at EL2
<6>[    0.005606] CPU features: detected: 32-bit EL0 Support
<6>[    0.005608] CPU features: detected: CRC32 instructions
<6>[    0.005629] alternatives: applying system-wide alternatives
<6>[    0.005737] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
<6>[    0.005860] Memory: 1000080K/1048576K available (9536K kernel code, 994K rwdata, 2836K rodata, 960K init, 314K bss, 45048K reserved, 0K cma-reserved)
<6>[    0.008253] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
<6>[    0.008266] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
<6>[    0.008348] 29056 pages in range for non-PLT usage
<6>[    0.008350] 520576 pages in range for PLT usage
<6>[    0.009355] pinctrl core: initialized pinctrl subsystem
<6>[    0.011208] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.011464] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.011483] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.011498] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.011795] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.011797] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.011800] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.011801] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.011853] ASID allocator initialised with 65536 entries
<6>[    0.012531] pstore: Using crash dump compression: deflate
<6>[    0.012534] pstore: Registered ramoops as persistent store backend
<6>[    0.012536] ramoops: using 0x10000@0x42ff0000, ecc: 0
<6>[    0.013517] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
<6>[    0.025350] cryptd: max_cpu_qlen set to 1000
<5>[    0.026516] SCSI subsystem initialized
<7>[    0.026598] libata version 3.00 loaded.
<6>[    0.027761] clocksource: Switched to clocksource arch_sys_counter
<6>[    0.029335] NET: Registered PF_INET protocol family
<6>[    0.029429] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
<6>[    0.030603] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
<6>[    0.030615] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[    0.030621] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
<6>[    0.030659] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
<6>[    0.030819] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.031065] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)
<6>[    0.031148] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
<6>[    0.031173] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
<6>[    0.031327] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[    0.031355] PCI: CLS 0 bytes, default 64
<6>[    0.031555] Unpacking initramfs...
<6>[    0.037801] workingset: timestamp_bits=46 max_order=18 bucket_order=0
<6>[    0.041247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.041252] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
<6>[    0.077099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    0.081941] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
<6>[    0.084725] printk: legacy console [ttyS0] disabled
<6>[    0.105056] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 2500000) is a ST16650V2
<6>[    0.105105] printk: legacy console [ttyS0] enabled
<6>[    0.914398] Freeing initrd memory: 4524K
<6>[    0.926825] mtk_rng 1020f000.rng: HW RNG not MMIO accessible, using SMC
<6>[    0.963631] mtk_rng 1020f000.rng: registered RNG driver
<5>[    0.963846] random: crng init done
<6>[    0.974709] loop: module loaded
<6>[    0.980361] spi-nand spi0.0: Winbond SPI NAND was found.
<6>[    0.985930] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
<5>[    0.998218] 6 fixed-partitions partitions found on MTD device spi0.0
<5>[    1.005083] Creating 6 MTD partitions on "spi0.0":
<5>[    1.010139] 0x000000000000-0x000000100000 : "bl2"
<5>[    1.016070] 0x000000100000-0x000000180000 : "u-boot-env"
<5>[    1.022237] 0x000000180000-0x000000380000 : "factory"
<5>[    1.029895] 0x000000380000-0x000000580000 : "fip"
<5>[    1.036173] 0x000000580000-0x0000005a0000 : "prod"
<5>[    1.041542] 0x000000600000-0x00000d800000 : "ubi"
<5>[    1.167493] ubi0: default fastmap pool size: 80
<5>[    1.172289] ubi0: default fastmap WL pool size: 40
<5>[    1.177323] ubi0: attaching mtd5
<5>[    1.760168] ubi0: scanning is finished
<5>[    1.768920] ubi0: attached mtd5 (name "ubi", size 210 MiB)
<5>[    1.774665] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[    1.781788] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[    1.788820] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[    1.796020] ubi0: good PEBs: 1680, bad PEBs: 0, corrupted PEBs: 0
<5>[    1.802356] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
<5>[    1.809819] ubi0: max/mean erase counter: 15/12, WL threshold: 4096, image sequence number: 1609450208
<5>[    1.819363] ubi0: available PEBs: 0, total reserved PEBs: 1680, PEBs reserved for bad PEB handling: 40
<5>[    1.828915] ubi0: background thread "ubi_bgt0d" started, PID 288
<6>[    1.829522] block ubiblock0_2: created from ubi0:2(fit)
<3>[    1.959007] mtk_soc_eth 15100000.ethernet: generated random MAC address 20:08:02:00:00:00
<3>[    1.967445] mtk_soc_eth 15100000.ethernet: generated random MAC address 20:08:02:00:00:00
<6>[    1.987600] Maxlinear Ethernet GPY211C mdio-bus:06: Firmware Version: 8.111 (0x886F)
<6>[    1.998819] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc085d00000, irq 121
<6>[    2.008855] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc085d00000, irq 121
<6>[    2.018769] i2c_dev: i2c /dev entries driver
<6>[    2.024528] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
<6>[    2.033250] NET: Registered PF_INET6 protocol family
<6>[    2.039133] Segment Routing with IPv6
<6>[    2.043066] In-situ OAM (IOAM) with IPv6
<6>[    2.047267] NET: Registered PF_PACKET protocol family
<6>[    2.052656] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
<6>[    2.066163] 8021q: 802.1Q VLAN Support v1.8
<6>[    2.084038] FIT: Detected U-Boot 2025.10-OpenWrt-r32713-f919e7899d
<6>[    2.090515] FIT: Selected configuration: "config-1" (OpenWrt acer_predator-w6x-ubootmod)
<6>[    2.098870] FIT:           kernel sub-image 0x00001000..0x0059acaa "kernel-1" (ARM64 OpenWrt Linux-6.12.71)
<6>[    2.108954] FIT:          flat_dt sub-image 0x0059b000..0x005a02c1 "fdt-1" (ARM64 OpenWrt acer_predator-w6x-ubootmod device tree blob)
<6>[    2.121366] FIT:       filesystem sub-image 0x005a1000..0x00b1dfff "rootfs-1" (ARM64 OpenWrt acer_predator-w6x-ubootmod rootfs)
<6>[    2.133675] block ubiblock0_2: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
<6>[    2.184191] mt7530-mdio mdio-bus:1f: no interrupt support
<6>[    2.217528] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode
<6>[    2.226758] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[    2.236778] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=POLL)
<6>[    2.258142] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=POLL)
<6>[    2.279209] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=POLL)
<6>[    2.300236] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=POLL)
<6>[    2.311546] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
<6>[    2.318520] DSA: tree 0 setup
<6>[    2.321973] clk: Disabling unused clocks
<6>[    2.326382] PM: genpd: Disabling unused power domains
<6>[    2.332134] Freeing unused kernel memory: 960K
<6>[    2.336857] Run /init as init process
<7>[    2.340769]   with arguments:
<7>[    2.343980]     /init
<7>[    2.346498]   with environment:
<7>[    2.349886]     HOME=/
<7>[    2.352491]     TERM=linux
<14>[    2.454847] init: Console is alive
<14>[    2.458703] init: - watchdog -
<14>[    2.465608] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<6>[    2.477822] usbcore: registered new interface driver usbfs
<6>[    2.483601] usbcore: registered new interface driver hub
<6>[    2.489197] usbcore: registered new device driver usb
<4>[    2.494951] gpio_button_hotplug: loading out-of-tree module taints kernel.
<6>[    2.506960] xhci-mtk 11200000.usb: xHCI Host Controller
<6>[    2.512462] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
<6>[    2.523108] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
<6>[    2.532592] xhci-mtk 11200000.usb: irq 125, io mem 0x11200000
<6>[    2.538688] xhci-mtk 11200000.usb: xHCI Host Controller
<6>[    2.544161] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
<6>[    2.551810] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
<6>[    2.559612] hub 1-0:1.0: USB hub found
<6>[    2.563624] hub 1-0:1.0: 2 ports detected
<6>[    2.568130] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    2.576674] hub 2-0:1.0: USB hub found
<6>[    2.580688] hub 2-0:1.0: 1 port detected
<14>[    2.588479] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[    2.603463] init: - preinit -
<6>[    2.663701] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
<6>[    2.672435] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
<4>[    2.698856] mtdblock: MTD device 'u-boot-env' is NAND, please consider using UBI block devices instead.
/etc/preinit: line 229: arithmetic syntax error
ip: "" is invalid lladdr
ip: "" is invalid lladdr
ip: "" is invalid lladdr
ip: "" is invalid lladdr
ip: "" is invalid lladdr
<6>[    3.121309] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
<6>[    5.213588] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[    7.173188] mt7530-mdio mdio-bus:1f lan1: Link is Down
<14>[    7.181464] procd: - early -
<14>[    7.184737] procd: - watchdog -
<14>[    7.704263] procd: - watchdog -
<14>[    7.707898] procd: - ubus -
<14>[    7.761846] procd: - init -
Please press Enter to activate this console.
<14>[    7.887704] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[    7.901812] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
<6>[    7.914912] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357
<6>[    7.922406] Backport generated by backports.git c8a37ce
<14>[    7.992936] urngd: v1.0.2 started.
<6>[    8.271233] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823160656a
<6>[    8.288798] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823160721
<6>[    8.325280] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823160840
<6>[    8.431734] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
<6>[    8.479011] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
<4>[    8.528996] mtdblock: MTD device 'u-boot-env' is NAND, please consider using UBI block devices instead.
<6>[    8.555144] PPP generic driver version 2.4.2
<6>[    8.560469] NET: Registered PF_PPPOX protocol family
<14>[    8.568027] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[    8.785254] mtdblock: MTD device 'u-boot-env' is NAND, please consider using UBI block devices instead.
<4>[    9.692894] mtdblock: MTD device 'u-boot-env' is NAND, please consider using UBI block devices instead.
<6>[   15.421533] mtk_soc_eth 15100000.ethernet eth0: Link is Down
<6>[   15.441786] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
<6>[   15.450662] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[   15.461167] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
<6>[   15.472786] br-lan: port 1(lan1) entered blocking state
<6>[   15.478345] br-lan: port 1(lan1) entered disabled state
<6>[   15.483864] mt7530-mdio mdio-bus:1f lan1: entered allmulticast mode
<6>[   15.490453] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
<6>[   15.500676] mt7530-mdio mdio-bus:1f lan1: entered promiscuous mode
<6>[   15.518440] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
<6>[   15.526335] br-lan: port 2(lan2) entered blocking state
<6>[   15.531885] br-lan: port 2(lan2) entered disabled state
<6>[   15.537398] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode
<6>[   15.545781] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode
<6>[   15.560328] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
<6>[   15.571279] br-lan: port 3(lan3) entered blocking state
<6>[   15.576765] br-lan: port 3(lan3) entered disabled state
<6>[   15.582291] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode
<6>[   15.590699] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode
<6>[   15.604924] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
<6>[   15.616054] br-lan: port 4(lan4) entered blocking state
<6>[   15.621586] br-lan: port 4(lan4) entered disabled state
<6>[   15.627098] mt7530-mdio mdio-bus:1f lan4: entered allmulticast mode
<6>[   15.635681] mt7530-mdio mdio-bus:1f lan4: entered promiscuous mode
<6>[   15.646369] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:06] driver [Maxlinear Ethernet GPY211C] (irq=POLL)
<6>[   15.656839] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/2500base-x link mode
<6>[   17.613580] mt7530-mdio mdio-bus:1f lan2: Link is Up - 100Mbps/Full - flow control off
<6>[   17.613603] br-lan: port 2(lan2) entered blocking state
<6>[   17.627229] br-lan: port 2(lan2) entered forwarding state
<6>[   18.573583] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[   18.573606] br-lan: port 1(lan1) entered blocking state
<6>[   18.587234] br-lan: port 1(lan1) entered forwarding state
<6>[   19.848914] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx



BusyBox v1.37.0 (2026-01-02 17:07:02 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r34059-a8d5544c83
 -----------------------------------------------------

 === WARNING! =====================================
 There is no root password defined on this device!
 Use the "passwd" command to set up a new password
 in order to prevent unauthorized SSH logins.
 --------------------------------------------------

root@OpenWrt:~# reboot
root@OpenWrt:~# <6>[   28.465917] br-lan: port 2(lan2) entered disabled state
<6>[   28.471493] br-lan: port 1(lan1) entered disabled state
<6>[   28.479223] mt7530-mdio mdio-bus:1f lan1: left allmulticast mode
<6>[   28.485494] mt7530-mdio mdio-bus:1f lan1: left promiscuous mode
<6>[   28.491753] br-lan: port 1(lan1) entered disabled state
<6>[   28.500368] mt7530-mdio mdio-bus:1f lan1: Link is Down
<6>[   28.512238] mt7530-mdio mdio-bus:1f lan2: left allmulticast mode
<6>[   28.518520] mt7530-mdio mdio-bus:1f lan2: left promiscuous mode
<6>[   28.524769] br-lan: port 2(lan2) entered disabled state
<6>[   28.533148] mt7530-mdio mdio-bus:1f lan2: Link is Down
<6>[   28.544653] mt7530-mdio mdio-bus:1f lan3: left allmulticast mode
<6>[   28.550951] mt7530-mdio mdio-bus:1f lan3: left promiscuous mode
<6>[   28.557194] br-lan: port 3(lan3) entered disabled state
<6>[   28.571591] mt7530-mdio mdio-bus:1f lan4: left allmulticast mode
<6>[   28.577913] mtk_soc_eth 15100000.ethernet eth0: left allmulticast mode
<6>[   28.584685] mt7530-mdio mdio-bus:1f lan4: left promiscuous mode
<6>[   28.590930] br-lan: port 4(lan4) entered disabled state
<6>[   28.602379] mtk_soc_eth 15100000.ethernet eth0: Link is Down
<6>[   29.005442] mtk_soc_eth 15100000.ethernet eth1: Link is Down
<0>[   33.019195] reboot: Restarting system

F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 01A8 [010F]
Jump to BL

NOTICE:  BL2: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL2: Built : 09:13:06, Apr 20 2026
NOTICE:  WDT: [40000000] Software reset (reboot)
NOTICE:  CPU: MT7986 (2000MHz)
NOTICE:  EMI: Using DDR4 settings
NOTICE:  EMI: complex R/W mem test passed
NOTICE:  DRAM: 1024MB
NOTICE:  SPI-NAND probed by CASN page
NOTICE:  SPI-NAND: WINBOND W25N02KV (256MB)
NOTICE:  SPI-NAND: Page size: 2KB+128, Block size: 128KB
NOTICE:  BL2: Booting BL31
NOTICE:  BL31: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL31: Built : 09:13:06, Apr 20 2026


U-Boot 2026.01-OpenWrt-r34059-a8d5544c83 (Apr 20 2026 - 09:13:06 +0000)

CPU:   MediaTek MT7986
Model: Acer Predator Connect W6x
DRAM:  1 GiB
Core:  27 devices, 14 uclasses, devicetree: embed
Loading Environment from UBI... spi-nand: spi_nand spi_nand@0: WINBOND W25N02KV SPI NAND was found.
spi-nand: spi_nand spi_nand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
"Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeeafffffe
elr: 0000000041e2c868 lr : 0000000041e2bc1c (reloc)
elr: 000000007ff6a868 lr : 000000007ff69c1c
x0 : eafffffeeafffffe x1 : 000000007fb20be0
x2 : eafffffeeafffffe x3 : eafffffeeafffffe
x4 : 000000007ffe1598 x5 : 000000007fb20f80
x6 : 000000007ffe15a8 x7 : 000000007fb43000
x8 : 0000000000000230 x9 : fffffffffffffff0
x10: 000000000000000d x11: 0000000000000006
x12: 0000000000000000 x13: 000000007ffd9f00
x14: 00000000fffffff9 x15: 0000000000000000
x16: 000000007ff842c8 x17: 0000000000000000
x18: 000000007f7ffe10 x19: 000000007fb20a60
x20: 0000000000000000 x21: 000000007fb202a0
x22: 000000007fb202a0 x23: 000000007fb21700
x24: 000000007fb20be0 x25: 000000007fb20a60
x26: 0000000000000000 x27: 000000007fb20be0
x28: 000000007fb20ec0 x29: 000000007f7c1a00

Code: f9400442 aa000043 b4000483 b40002a0 (f9400003)
Resetting CPU ...

resetting ...

F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 01A8 [010F]
Jump to BL

NOTICE:  BL2: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL2: Built : 09:13:06, Apr 20 2026
NOTICE:  WDT: [40000000] Software reset (reboot)
NOTICE:  CPU: MT7986 (1998MHz)
NOTICE:  EMI: Using DDR4 settings
NOTICE:  EMI: complex R/W mem test passed
NOTICE:  DRAM: 1024MB
NOTICE:  SPI-NAND probed by CASN page
NOTICE:  SPI-NAND: WINBOND W25N02KV (256MB)
NOTICE:  SPI-NAND: Page size: 2KB+128, Block size: 128KB
NOTICE:  BL2: Booting BL31
NOTICE:  BL31: v2.14.0(release):OpenWrt v2026.01.23~e06f2586-1 (mt7986-spim-nand-ddr4)
NOTICE:  BL31: Built : 09:13:06, Apr 20 2026


U-Boot 2026.01-OpenWrt-r34059-a8d5544c83 (Apr 20 2026 - 09:13:06 +0000)

CPU:   MediaTek MT7986
Model: Acer Predator Connect W6x
DRAM:  1 GiB
Core:  27 devices, 14 uclasses, devicetree: embed
Loading Environment from UBI... spi-nand: spi_nand spi_nand@0: WINBOND W25N02KV SPI NAND was found.
spi-nand: spi_nand spi_nand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
"Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeeafffffe
elr: 0000000041e2c868 lr : 0000000041e2bc1c (reloc)
elr: 000000007ff6a868 lr : 000000007ff69c1c
x0 : eafffffeeafffffe x1 : 000000007fb20be0
x2 : eafffffeeafffffe x3 : eafffffeeafffffe
x4 : 000000007ffe1598 x5 : 000000007fb20f80
x6 : 000000007ffe15a8 x7 : 000000007fb43000
x8 : 0000000000000230 x9 : fffffffffffffff0
x10: 000000000000000d x11: 0000000000000006
x12: 0000000000000000 x13: 000000007ffd9f00
x14: 00000000fffffff9 x15: 0000000000000000
x16: 000000007ff842c8 x17: 0000000000000000
x18: 000000007f7ffe10 x19: 000000007fb20a60
x20: 0000000000000000 x21: 000000007fb202a0
x22: 000000007fb202a0 x23: 000000007fb21700
x24: 000000007fb20be0 x25: 000000007fb20a60
x26: 0000000000000000 x27: 000000007fb20be0
x28: 000000007fb20ec0 x29: 000000007f7c1a00

Code: f9400442 aa000043 b4000483 b40002a0 (f9400003)
Resetting CPU ...

resetting ...
18

you're booting the initramfs only to issue a reboot once it booted, why ?

you were asked to follow the guide, why aren't you ?

19

i did but i cant fit the whole console in here so i did that to show you what it does

20

you're not answering the question.