Mon Aug 21 10:11:59 2017 daemon.notice netifd: Network device 'pppoe-wan' link is up
Mon Aug 21 10:11:59 2017 daemon.notice netifd: Interface 'wan' is now up
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: reading /tmp/resolv.conf.auto
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using local addresses only for domain test
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using local addresses only for domain onion
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using local addresses only for domain localhost
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using local addresses only for domain local
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using local addresses only for domain invalid
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using local addresses only for domain example.net
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using local addresses only for domain example.org
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using local addresses only for domain example.com
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using nameserver 202.102.154.3#53
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using nameserver 202.102.152.3#53
Mon Aug 21 10:11:59 2017 daemon.info dnsmasq[32409]: using 3 more local addresses
Mon Aug 21 10:11:59 2017 user.notice firewall: Reloading firewall due to ifup of wan (pppoe-wan)
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[32409]: exiting on receipt of SIGTERM
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: started, version 2.77 cachesize 150
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: DNS service limited to local subnets
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq-dhcp[2928]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain test
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain onion
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain localhost
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain local
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain invalid
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain example.net
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain example.org
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain example.com
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using 3 more local addresses
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: reading /tmp/resolv.conf.auto
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain test
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain onion
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain localhost
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain local
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain invalid
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain example.net
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain example.org
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using local addresses only for domain example.com
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using nameserver 202.102.154.3#53
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using nameserver 202.102.152.3#53
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: using 3 more local addresses
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: read /etc/hosts - 4 addresses
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq[2928]: read /tmp/hosts/odhcpd - 1 addresses
Mon Aug 21 10:12:02 2017 daemon.info dnsmasq-dhcp[2928]: read /etc/ethers - 0 addresses
Mon Aug 21 10:18:40 2017 daemon.info dnsmasq-dhcp[2928]: DHCPINFORM(br-lan) 192.168.1.151 00:25:22:53:5f:08
Mon Aug 21 10:18:40 2017 daemon.info dnsmasq-dhcp[2928]: DHCPACK(br-lan) 192.168.1.151 00:25:22:53:5f:08 7-1t-PC
[ 0.000000] Linux version 4.9.40 (john@ubuntu) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4151-0dcc36f) ) #0 Sat Aug 5 07:47:41 2017
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is Phicomm PSG1218 rev.A
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 803f8f44, node_mem_map 81000020
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=000795f0
[ 0.000000] Readback ErrCtl register=000795f0
[ 0.000000] Memory: 60364K/65536K available (3158K kernel code, 158K rwdata, 756K rodata, 208K init, 216K bss, 5172K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.015461] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.080602] pid_max: default: 32768 minimum: 301
[ 0.089917] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.102942] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.123547] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.143027] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.155173] pinctrl core: initialized pinctrl subsystem
[ 0.166163] NET: Registered protocol family 16
[ 0.435611] PCI host bridge /pcie@10140000 ranges:
[ 0.444998] MEM 0x0000000020000000..0x000000002fffffff
[ 0.455382] IO 0x0000000010160000..0x000000001016ffff
[ 0.478438] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.489465] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.502596] PCI host bridge to bus 0000:00
[ 0.510596] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[ 0.524307] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 0.536040] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.549539] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.565330] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
[ 0.565364] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 0.565380] pci 0000:00:00.0: reg 0x14: [mem 0x20200000-0x2020ffff]
[ 0.565456] pci 0000:00:00.0: supports D1
[ 0.565468] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.565915] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[ 0.565965] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 0.566019] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.566117] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.566366] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.566386] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.566437] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 0.579488] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 0.593303] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[ 0.606805] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[ 0.621170] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[ 0.634679] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[ 0.649227] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[ 0.663570] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.673428] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
[ 0.686936] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
[ 0.701316] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[ 0.712899] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[ 0.727570] clocksource: Switched to clocksource systick
[ 0.739337] NET: Registered protocol family 2
[ 0.748839] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.762615] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.775201] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.787933] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.799459] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.812147] NET: Registered protocol family 1
[ 0.820775] PCI: CLS 80 bytes, default 32
[ 0.822981] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.835701] Crashlog allocated RAM at address 0x3f00000
[ 0.847111] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.868138] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.879624] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.907428] io scheduler noop registered
[ 0.915129] io scheduler deadline registered (default)
[ 0.925588] ralink-usb-phy usbphy: invalid resource
[ 0.935783] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.949430] console [ttyS0] disabled
[ 0.956421] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.976196] console [ttyS0] enabled
[ 0.989966] bootconsole [early0] disabled
[ 1.010073] spi spi0.0: force spi mode3
[ 1.018549] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 1.028186] 4 ofpart partitions found on MTD device spi0.0
[ 1.039117] Creating 4 MTD partitions on "spi0.0":
[ 1.048673] 0x000000000000-0x000000030000 : "u-boot"
[ 1.060236] 0x000000030000-0x000000040000 : "u-boot-env"
[ 1.072713] 0x000000040000-0x000000050000 : "factory"
[ 1.084658] 0x000000050000-0x000000800000 : "firmware"
[ 1.766304] 2 uimage-fw partitions found on MTD device firmware
[ 1.778146] 0x000000050000-0x00000019ba66 : "kernel"
[ 1.789689] 0x00000019ba66-0x000000800000 : "rootfs"
[ 1.801426] mtd: device 5 (rootfs) set to be root filesystem
[ 1.813326] 1 squashfs-split partitions found on MTD device rootfs
[ 1.825713] 0x0000003d6000-0x000000800000 : "rootfs_data"
[ 1.838807] libphy: Fixed MDIO Bus: probed
[ 1.850556] gsw: setting port4 to ephy mode
[ 1.858964] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
[ 1.877162] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 4 link up (100Mbps/Full duplex)
[ 1.895592] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 1.908264] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 1.925308] rt2880_wdt 10000120.watchdog: Initialized
[ 1.936539] NET: Registered protocol family 10
[ 1.948509] NET: Registered protocol family 17
[ 1.957413] 8021q: 802.1Q VLAN Support v1.8
[ 1.980285] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 1.995508] Freeing unused kernel memory: 208K (803fc000 - 80430000)
[ 2.008195] This architecture does not have kernel memory protection.
[ 2.737527] random: fast init done
[ 3.673636] init: Console is alive
[ 3.680728] init: - watchdog -
[ 4.930497] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.196873] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.215400] init: - preinit -
[ 7.045761] 8021q: adding VLAN 0 to HW filter on device eth0
[ 8.691389] jffs2: notice: (317) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 8.725634] mount_root: switching to jffs2 overlay
[ 8.771823] urandom-seed: Seeding with /etc/urandom.seed
[ 8.833167] procd: - early -
[ 8.840406] procd: - watchdog -
[ 9.370209] procd: - watchdog -
[ 9.376738] procd: - ubus -
[ 9.523148] procd: - init -
[ 9.990629] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.009493] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.031854] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[ 10.047876] Backport generated by backports.git backports-20160324-13-g24da7d3c
[ 10.114696] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[ 10.133170] mt76x2e 0000:01:00.0: ROM patch already applied
[ 10.243182] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[ 10.254175] mt76x2e 0000:01:00.0: Build: 1
[ 10.262327] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[ 10.294700] mt76x2e 0000:01:00.0: Firmware running!
[ 10.305318] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.388185] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.410693] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 10.587935] xt_time: kernel timezone is -0000
[ 10.609140] PPP generic driver version 2.4.2
[ 10.623736] NET: Registered protocol family 24
[ 10.676121] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
[ 10.690559] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[ 10.706023] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
[ 10.720460] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 10.781575] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 19.393862] 8021q: adding VLAN 0 to HW filter on device eth0
[ 19.430300] br-lan: port 1(eth0.1) entered blocking state
[ 19.441330] br-lan: port 1(eth0.1) entered disabled state
[ 19.452569] device eth0.1 entered promiscuous mode
[ 19.462155] device eth0 entered promiscuous mode
[ 19.529480] br-lan: port 1(eth0.1) entered blocking state
[ 19.540315] br-lan: port 1(eth0.1) entered forwarding state
[ 21.667205] pppoe-wan: renamed from ppp0
[ 24.338816] ieee80211 phy1: rt2800_config_channel: Warning - Using incomplete support for external PA
[ 24.363800] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 24.519552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.531961] br-lan: port 2(wlan1) entered blocking state
[ 24.542630] br-lan: port 2(wlan1) entered disabled state
[ 24.553699] device wlan1 entered promiscuous mode
[ 24.595005] br-lan: port 3(wlan0) entered blocking state
[ 24.605671] br-lan: port 3(wlan0) entered disabled state
[ 24.616774] device wlan0 entered promiscuous mode
[ 24.626294] br-lan: port 3(wlan0) entered blocking state
[ 24.636906] br-lan: port 3(wlan0) entered forwarding state
[ 25.145341] br-lan: port 3(wlan0) entered disabled state
[ 25.327861] pppoe-wan: renamed from ppp0
[ 25.965149] ieee80211 phy1: rt2800_config_channel: Warning - Using incomplete support for external PA
[ 26.012442] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 26.025386] br-lan: port 2(wlan1) entered blocking state
[ 26.035999] br-lan: port 2(wlan1) entered forwarding state
[ 26.759798] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.772705] br-lan: port 3(wlan0) entered blocking state
[ 26.783333] br-lan: port 3(wlan0) entered forwarding state
[ 28.565619] pppoe-wan: renamed from ppp0
[ 44.644782] random: crng init done
[ 192.353893] pppoe-wan: renamed from ppp0
[ 6881.130625] mtk_soc_eth 10100000.ethernet eth0: port 1 link down
[ 6881.689148] mtk_soc_eth 10100000.ethernet eth0: port 1 link up (100Mbps/Full duplex)
[ 6881.911695] mtk_soc_eth 10100000.ethernet eth0: port 1 link down
[ 8878.330677] pppoe-wan: renamed from ppp0
[16103.663772] pppoe-wan: renamed from ppp0
[18117.915982] mtk_soc_eth 10100000.ethernet eth0: port 1 link up (100Mbps/Full duplex)
[18126.326609] mtk_soc_eth 10100000.ethernet eth0: port 1 link down
[18127.029190] mtk_soc_eth 10100000.ethernet eth0: port 1 link up (100Mbps/Full duplex)
[19289.744195] pppoe-wan: renamed from ppp0
[19290.192398] pppoe-wan: renamed from ppp0
[19290.639099] pppoe-wan: renamed from ppp0
[19439.284970] pppoe-wan: renamed from ppp0
[19491.620015] pppoe-wan: renamed from ppp0
[19494.297871] pppoe-wan: renamed from ppp0
[19496.424473] pppoe-wan: renamed from ppp0
[19625.015882] pppoe-wan: renamed from ppp0- Your first log shows the message after the WAN interface becomes UP; then there is a DCHP request from a client in the LAN; there is no way we can know what is happening there.
- Your second log does not contain any useful information, either.
- Without seeing your config files, it is even harder to know what is going on.
HI, updating from 17.01.4 to 18.06 RC1 also I have the same problem with the DIR-860L and Xiaomi 3G.
Sun Jun 24 22:36:37 2018 daemon.notice netifd: Interface 'wan' is now down
Sun Jun 24 22:36:37 2018 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jun 24 22:36:38 2018 daemon.err insmod: module is already loaded - slhc
Sun Jun 24 22:36:38 2018 daemon.err insmod: module is already loaded - ppp_generic
Sun Jun 24 22:36:38 2018 daemon.err insmod: module is already loaded - pppox
Sun Jun 24 22:36:38 2018 daemon.err insmod: module is already loaded - pppoe
Sun Jun 24 22:36:38 2018 daemon.info dnsmasq[3452]: read /etc/hosts - 4 addresses
Sun Jun 24 22:36:38 2018 daemon.info dnsmasq[3452]: read /tmp/hosts/odhcpd - 1 addresses
Sun Jun 24 22:36:38 2018 daemon.info dnsmasq[3452]: read /tmp/hosts/dhcp.cfg01411c - 3 addresses
Sun Jun 24 22:36:38 2018 daemon.info dnsmasq-dhcp[3452]: read /etc/ethers - 0 addresses
Sun Jun 24 22:36:38 2018 daemon.info pppd[6291]: Plugin rp-pppoe.so loaded.
Sun Jun 24 22:36:38 2018 daemon.info pppd[6291]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Sun Jun 24 22:36:38 2018 daemon.notice pppd[6291]: pppd 2.4.7 started by root, uid 0
Sun Jun 24 22:36:53 2018 daemon.warn pppd[6291]: Timeout waiting for PADO packets
Sun Jun 24 22:36:53 2018 daemon.err pppd[6291]: Unable to complete PPPoE Discovery
Sun Jun 24 22:36:53 2018 daemon.info pppd[6291]: Exit.
Sun Jun 24 22:36:53 2018 daemon.notice netifd: Interface 'wan' is now down
Sun Jun 24 22:36:53 2018 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jun 24 22:36:53 2018 daemon.err insmod: module is already loaded - slhc
Sun Jun 24 22:36:53 2018 daemon.err insmod: module is already loaded - ppp_generic
Sun Jun 24 22:36:53 2018 daemon.err insmod: module is already loaded - pppox
Sun Jun 24 22:36:53 2018 daemon.err insmod: module is already loaded - pppoe
Sun Jun 24 22:36:53 2018 daemon.info pppd[6494]: Plugin rp-pppoe.so loaded.
Sun Jun 24 22:36:53 2018 daemon.info pppd[6494]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Sun Jun 24 22:36:53 2018 daemon.notice pppd[6494]: pppd 2.4.7 started by root, uid 0
Sun Jun 24 22:37:08 2018 daemon.warn pppd[6494]: Timeout waiting for PADO packets
Sun Jun 24 22:37:08 2018 daemon.err pppd[6494]: Unable to complete PPPoE Discovery
Sun Jun 24 22:37:08 2018 daemon.info pppd[6494]: Exit.
Sun Jun 24 22:37:08 2018 daemon.notice netifd: Interface 'wan' is now down
Sun Jun 24 22:37:08 2018 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jun 24 22:37:08 2018 daemon.err insmod: module is already loaded - slhc
Sun Jun 24 22:37:08 2018 daemon.err insmod: module is already loaded - ppp_generic
Sun Jun 24 22:37:08 2018 daemon.err insmod: module is already loaded - pppox
Sun Jun 24 22:37:08 2018 daemon.err insmod: module is already loaded - pppoe
Sun Jun 24 22:37:09 2018 daemon.info pppd[6666]: Plugin rp-pppoe.so loaded.
Sun Jun 24 22:37:09 2018 daemon.info pppd[6666]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Sun Jun 24 22:37:09 2018 daemon.notice pppd[6666]: pppd 2.4.7 started by root, uid 0
Sun Jun 24 22:37:24 2018 daemon.warn pppd[6666]: Timeout waiting for PADO packets
Sun Jun 24 22:37:24 2018 daemon.err pppd[6666]: Unable to complete PPPoE Discovery
Sun Jun 24 22:37:24 2018 daemon.info pppd[6666]: Exit.
Sun Jun 24 22:37:24 2018 daemon.notice netifd: Interface 'wan' is now down
Sun Jun 24 22:37:24 2018 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jun 24 22:37:24 2018 daemon.err insmod: module is already loaded - slhc
Sun Jun 24 22:37:24 2018 daemon.err insmod: module is already loaded - ppp_generic
Sun Jun 24 22:37:24 2018 daemon.err insmod: module is already loaded - pppox
Sun Jun 24 22:37:24 2018 daemon.err insmod: module is already loaded - pppoe
Sun Jun 24 22:37:24 2018 daemon.info pppd[6799]: Plugin rp-pppoe.so loaded.
Sun Jun 24 22:37:24 2018 daemon.info pppd[6799]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Sun Jun 24 22:37:24 2018 daemon.notice pppd[6799]: pppd 2.4.7 started by root, uid 0
Sun Jun 24 22:37:39 2018 daemon.warn pppd[6799]: Timeout waiting for PADO packets
Sun Jun 24 22:37:39 2018 daemon.err pppd[6799]: Unable to complete PPPoE Discovery
Sun Jun 24 22:37:39 2018 daemon.info pppd[6799]: Exit.
Sun Jun 24 22:37:39 2018 daemon.notice netifd: Interface 'wan' is now down
Sun Jun 24 22:37:39 2018 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jun 24 22:37:39 2018 daemon.err insmod: module is already loaded - slhc
Sun Jun 24 22:37:39 2018 daemon.err insmod: module is already loaded - ppp_generic
Sun Jun 24 22:37:39 2018 daemon.err insmod: module is already loaded - pppox
Sun Jun 24 22:37:39 2018 daemon.err insmod: module is already loaded - pppoe
Sun Jun 24 22:37:39 2018 daemon.info pppd[6909]: Plugin rp-pppoe.so loaded.
Sun Jun 24 22:37:39 2018 daemon.info pppd[6909]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Sun Jun 24 22:37:40 2018 daemon.notice pppd[6909]: pppd 2.4.7 started by root, uid 0
Sun Jun 24 22:37:55 2018 daemon.warn pppd[6909]: Timeout waiting for PADO packets
Sun Jun 24 22:37:55 2018 daemon.err pppd[6909]: Unable to complete PPPoE Discovery
Sun Jun 24 22:37:55 2018 daemon.info pppd[6909]: Exit.
Sun Jun 24 22:37:55 2018 daemon.notice netifd: Interface 'wan' is now down
Sun Jun 24 22:37:55 2018 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jun 24 22:37:55 2018 daemon.err insmod: module is already loaded - slhc
Sun Jun 24 22:37:55 2018 daemon.err insmod: module is already loaded - ppp_generic
Sun Jun 24 22:37:55 2018 daemon.err insmod: module is already loaded - pppox
Sun Jun 24 22:37:55 2018 daemon.err insmod: module is already loaded - pppoe
Sun Jun 24 22:37:55 2018 daemon.info pppd[7086]: Plugin rp-pppoe.so loaded.
Sun Jun 24 22:37:55 2018 daemon.info pppd[7086]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Sun Jun 24 22:37:55 2018 daemon.notice pppd[7086]: pppd 2.4.7 started by root, uid 0
Sun Jun 24 22:38:00 2018 daemon.info pppd[7086]: PPP session is 26266
Sun Jun 24 22:38:00 2018 daemon.warn pppd[7086]: Connected to 08:96:ad:6b:74:d0 via interface eth0.2
Sun Jun 24 22:38:00 2018 kern.info kernel: [ 353.525389] pppoe-wan: renamed from ppp0
Sun Jun 24 22:38:00 2018 daemon.info pppd[7086]: Using interface pppoe-wan
Sun Jun 24 22:38:00 2018 daemon.notice pppd[7086]: Connect: pppoe-wan <--> eth0.2
Sun Jun 24 22:38:03 2018 daemon.info pppd[7086]: CHAP authentication succeeded
Sun Jun 24 22:38:03 2018 daemon.notice pppd[7086]: CHAP authentication succeeded
Sun Jun 24 22:38:03 2018 daemon.notice pppd[7086]: peer from calling number 08:96:AD:6B:74:D0 authorized
Sun Jun 24 22:38:03 2018 daemon.notice pppd[7086]: local IP address 94.35.xxx.xxx
Sun Jun 24 22:38:03 2018 daemon.notice pppd[7086]: remote IP address 94.32.xxx.xxx
Sun Jun 24 22:38:03 2018 daemon.notice pppd[7086]: primary DNS address 213.205.32.70
Sun Jun 24 22:38:03 2018 daemon.notice pppd[7086]: secondary DNS address 213.205.36.70
Sun Jun 24 22:38:04 2018 daemon.notice netifd: Network device 'pppoe-wan' link is up
Sun Jun 24 22:38:04 2018 daemon.notice netifd: Interface 'wan' is now up
Does anyone have the same problem with 18.06 RC1?
I am running 18.06RC1 on my dir-860l and pppoe connects just fine for me.
Does the router connect immediately after restart?
I have this problem with 2 DIR-860L and Xiaomi 3G, all routers use different modem and DSL line.
root@OpenWrt:~# opkg list
base-files - 190-r7102-3f3a2c9
block-mount - 2018-04-16-e2436836-1
busybox - 1.28.3-4
chat - 2.4.7-12
comgt - 0.32-30
ddns-scripts - 2.7.7-6
dnsmasq - 2.80test2-3
dropbear - 2017.75-5
firewall - 2018-05-14-b45e162e-1
fstools - 2018-04-16-e2436836-1
fwtool - 1
hd-idle - 1.05-1
hostapd-common - 2018-04-09-fa617ee6-5
ip6tables - 1.6.2-1
iptables - 1.6.2-1
iptables-mod-conntrack-extra - 1.6.2-1
iptables-mod-ipopt - 1.6.2-1
iw - 4.14-1
jshn - 2018-04-12-6eff829d-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 4.14.50-1-2071d82307d5f3d726fb88c15048cc15
kmod-cfg80211 - 4.14.50+2017-11-01-9
kmod-crypto-aead - 4.14.50-1
kmod-crypto-crc32c - 4.14.50-1
kmod-crypto-ecb - 4.14.50-1
kmod-crypto-hash - 4.14.50-1
kmod-crypto-manager - 4.14.50-1
kmod-crypto-null - 4.14.50-1
kmod-crypto-pcompress - 4.14.50-1
kmod-crypto-sha1 - 4.14.50-1
kmod-fs-exfat - 4.14.50+2017-06-20-de4c760b-1
kmod-fs-ext4 - 4.14.50-1
kmod-fs-vfat - 4.14.50-1
kmod-gpio-button-hotplug - 4.14.50-2
kmod-gre - 4.14.50-1
kmod-ifb - 4.14.50-1
kmod-ip6tables - 4.14.50-1
kmod-ipt-conntrack - 4.14.50-1
kmod-ipt-conntrack-extra - 4.14.50-1
kmod-ipt-core - 4.14.50-1
kmod-ipt-ipopt - 4.14.50-1
kmod-ipt-nat - 4.14.50-1
kmod-ipt-offload - 4.14.50-1
kmod-iptunnel - 4.14.50-1
kmod-leds-gpio - 4.14.50-1
kmod-lib-crc-ccitt - 4.14.50-1
kmod-lib-crc16 - 4.14.50-1
kmod-mac80211 - 4.14.50+2017-11-01-9
kmod-mii - 4.14.50-1
kmod-mppe - 4.14.50-1
kmod-mt76-core - 4.14.50+2018-06-19-1d4ca10a-1
kmod-mt76x2 - 4.14.50+2018-06-19-1d4ca10a-1
kmod-nf-conntrack - 4.14.50-1
kmod-nf-conntrack6 - 4.14.50-1
kmod-nf-flow - 4.14.50-1
kmod-nf-ipt - 4.14.50-1
kmod-nf-ipt6 - 4.14.50-1
kmod-nf-nat - 4.14.50-1
kmod-nf-reject - 4.14.50-1
kmod-nf-reject6 - 4.14.50-1
kmod-nls-base - 4.14.50-1
kmod-nls-cp437 - 4.14.50-1
kmod-nls-iso8859-1 - 4.14.50-1
kmod-nls-utf8 - 4.14.50-1
kmod-ppp - 4.14.50-1
kmod-pppoe - 4.14.50-1
kmod-pppox - 4.14.50-1
kmod-sched-cake - 4.14.50+2018-05-15-779e91a9-1
kmod-sched-core - 4.14.50-1
kmod-scsi-core - 4.14.50-1
kmod-slhc - 4.14.50-1
kmod-tun - 4.14.50-1
kmod-usb-core - 4.14.50-1
kmod-usb-ledtrig-usbport - 4.14.50-1
kmod-usb-net - 4.14.50-1
kmod-usb-net-cdc-ether - 4.14.50-1
kmod-usb-net-cdc-ncm - 4.14.50-1
kmod-usb-net-huawei-cdc-ncm - 4.14.50-1
kmod-usb-printer - 4.14.50-1
kmod-usb-serial - 4.14.50-1
kmod-usb-serial-option - 4.14.50-1
kmod-usb-serial-wwan - 4.14.50-1
kmod-usb-storage - 4.14.50-1
kmod-usb-storage-extras - 4.14.50-1
kmod-usb-storage-uas - 4.14.50-1
kmod-usb-wdm - 4.14.50-1
kmod-usb3 - 4.14.50-1
libblobmsg-json - 2018-04-12-6eff829d-1
libbz2 - 1.0.6-3
libc - 1.1.19-1
libexif - 0.6.21-1
libffmpeg-mini - 3.2.10-3
libflac - 1.3.2-1
libgcc - 7.3.0-1
libid3tag - 0.15.1b-4
libip4tc - 1.6.2-1
libip6tc - 1.6.2-1
libiwinfo - 2018-02-15-223e09bf-1
libiwinfo-lua - 2018-02-15-223e09bf-1
libjpeg - 9a-1
libjson-c - 0.12.1-1
libjson-script - 2018-04-12-6eff829d-1
liblua - 5.1.5-1
liblucihttp - 2018-04-22-ccc685e5-1
liblucihttp-lua - 2018-04-22-ccc685e5-1
liblzo - 2.10-1
libnl-tiny - 0.1-5
libogg - 1.3.2-2
libopenssl - 1.0.2o-1
libpthread - 1.1.19-1
librt - 1.1.19-1
libsqlite3 - 3230100-1
libubox - 2018-04-12-6eff829d-1
libubus - 2018-01-16-5bae22eb-1
libubus-lua - 2018-01-16-5bae22eb-1
libuci - 2018-03-24-5d2bf09e-1
libuclient - 2017-11-02-4b87d831-1
libusb-1.0 - 1.0.22-1
libuuid - 2.32-2
libvorbis - 1.3.6-1
libxtables - 1.6.2-1
logd - 2018-02-14-128bc35f-2
lua - 5.1.5-1
luci - git-18.163.60998-c379f00-1
luci-app-ddns - 2.4.9-3
luci-app-firewall - git-18.163.60998-c379f00-1
luci-app-hd-idle - git-18.163.60998-c379f00-1
luci-app-minidlna - git-18.163.60998-c379f00-1
luci-app-openvpn - git-18.163.60998-c379f00-1
luci-app-p910nd - git-18.163.60998-c379f00-1
luci-app-samba - git-18.163.60998-c379f00-1
luci-app-sqm - 1.2.3-1
luci-app-upnp - git-18.163.60998-c379f00-1
luci-app-wifischedule - git-18.163.60998-c379f00-1
luci-base - git-18.163.60998-c379f00-1
luci-lib-ip - git-18.163.60998-c379f00-1
luci-lib-jsonc - git-18.163.60998-c379f00-1
luci-lib-nixio - git-18.163.60998-c379f00-1
luci-mod-admin-full - git-18.163.60998-c379f00-1
luci-proto-3g - git-18.163.60998-c379f00-1
luci-proto-ipv6 - git-18.163.60998-c379f00-1
luci-proto-ppp - git-18.163.60998-c379f00-1
luci-proto-relay - git-18.163.60998-c379f00-1
luci-theme-bootstrap - git-18.163.60998-c379f00-1
minidlna - 1.2.1-3
miniupnpd - 2.1-1
mtd - 21
netifd - 2018-05-30-a580028d-1
odhcp6c - 2018-04-29-5316d7f8-12
odhcpd-ipv6only - 1.7-1
openssl-util - 1.0.2o-1
openvpn-easy-rsa - 3.0.1-1
openvpn-openssl - 2.4.5-3
openwrt-keyring - 2018-05-18-103a32e9-1
opkg - 2017-12-07-3b417b9f-2
p910nd - 0.97-5
ppp - 2.4.7-12
ppp-mod-pppoe - 2.4.7-12
pptpd - 1.4.0-3
procd - 2018-03-28-dfb68f85-1
relayd - 2016-02-07-ad0b25ad-2
rpcd - 2018-05-13-82062195-1
rpcd-mod-rrdns - 20170710
samba36-server - 3.6.25-10
sqm-scripts - 1.2.3-1
swconfig - 11
tc - 4.16.0-3
ubi-utils - 2.0.2-1
ubox - 2018-02-14-128bc35f-2
ubus - 2018-01-16-5bae22eb-1
ubusd - 2018-01-16-5bae22eb-1
uci - 2018-03-24-5d2bf09e-1
uclient-fetch - 2017-11-02-4b87d831-1
uhttpd - 2017-11-04-a235636a-1
uhttpd-mod-ubus - 2017-11-04-a235636a-1
usb-modeswitch - 2017-12-19-f40f84c2-1
usign - 2015-07-04-ef641914-1
wifischedule - 1-2
wireless-regdb - 2017-10-20-4343d359
wpad-mini - 2018-04-09-fa617ee6-5
zlib - 1.2.11-2
root@OpenWrt:~#
Yep it does for me.
Have you checked with your ISP? Some ISPs will enforce a "cool-down" period after a PPPoE connection tear-down. So maybe they simply force you to wait say 5 minutes? One rationale for that might be that their end might be configured to wait a considerable amount of time for further LCP packets on the pppoe link to not confuse a transient outage with a full tear-down.
Looks like a sysupgrade going awry somewhere.
Did you preserve settings while upgrading? I would flash a factory image and set everything up again to see if that fixes the problem.