Yes, I have it running and works great. better than the device from my isp.
the error at the beginning was not on my side. My isp did not connect the dsl line properly.
someone from there service had to redo the dsl line, i mean not at my home.
I added the vlan like this. but i didn't even test it without the vlan. maybe it will still work...
well here is a screenshot where do do the vlan.
image of wan interace imgur.com/H96SV6f
some parts of my network config:
config atm-bridge 'atm'
option vpi '1'
option vci '32'
option encaps 'llc'
option payload 'bridged'
config interface 'wan'
option proto 'pppoe'
option ipv6 'auto'
option username '______@t-online.de'
option password '______'
option _orig_ifname 'ptm0'
option _orig_bridge 'false'
option ifname 'ptm0.7'
config device 'wan_dev'
option name 'ptm0'
option macaddr '__________'
config interface 'wan6'
option ifname 'pppoe-wan'
option proto 'dhcpv6'
option reqaddress 'try'
option reqprefix 'auto'
and the dsl status:
Status: UP
Line State: showtime_tc_sync [0x801]
Line Mode: G.993.2 (VDSL2)
Annex: B
Profile: 17a
Data Rate: 25.088 Mb/s / 5.056 Mb/s
Max. Attainable Data Rate (ATTNDR): 41.185 Mb/s / 5.445 Mb/s
Latency: 8.0 ms / 7.0 ms
Line Attenuation (LATN): 25.9 dB / 38 dB
Signal Attenuation (SATN): 23.4 dB / 26 dB
Noise Margin (SNR): 13.5 dB / 5.8 dB
Aggregate Transmit Power(ACTATP): 3.7 dB / 14.6 dB
Forward Error Correction Seconds (FECS): 113602363 / 142895
Errored seconds (ES): 112 / 165
Severely Errored Seconds (SES): 0 / 52
Loss of Signal Seconds (LOSS): 0 / 52
Unavailable Seconds (UAS): 25 / 25
Header Error Code Errors (HEC): 0 / 0
Non Pre-emtive CRC errors (CRC_P): 452 / 0
Pre-emtive CRC errors (CRCP_P): 0 / 0
Line Uptime: 6d 7h 22m 36s
ATU-C System Vendor ID: Broadcom 164.97
Power Management Mode: L0 - Synchronized