I was able to do that too now.
The wlan did not show up, I upgraded the firmware with the OpenWrt upgrade file, and then i had wlan.
But I cant find my modem. ttyUSB2 works fine with picocom, but it seems like OpenWrt does not hav drivers for the modem
The modem is there, but now i cant connect:
(I have Fjordkraft mobile, and they use Telenor)
root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --start-network telenor --autoconnect
"Call failed"
Edit: wrong sim selected
AT Commands Quectel
root@OpenWrt:~# picocom /dev/ttyUSB2
picocom v3.1
port is : /dev/ttyUSB2
flowcontrol : none
baudrate is : 9600
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
hangup is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
logfile is : none
initstring : none
exit_after is : not set
exit is : no
Type [C-a] [C-h] to see available commands
Terminal ready
AT+QUIMSLOT=1
OK
+CPIN: NOT READY
+CPIN: READY
+QUSIM: 1
+QIND: SMS DONE
+QIND: PB DONE
AT+QSIMSTAT?
+QSIMSTAT: 0,1
To get a connection I needed to use picocom and the ceoomand "AT+CGATT=1"
Is there any autoconnect?
(I lost connection, but for a little while I was online. I deactivated wifi and then i lost LTE too...)
OK
AT+QNWINFO
+QNWINFO: "FDD LTE","24201","LTE BAND 3",1450
OK
AT+QENG="servingcell"
+QENG: "servingcell","NOCONN"
+QENG: "LTE","FDD",242,01,311D302,477,1450,3,5,5,7C39,-104,-12,-73,14,14,70,-
+QENG:"NR5G-NSA",242,01,165,-86,12,-11,152600,28,1
OK
AT+QNWCFG="nr5g_csi"
+QNWCFG: "nr5g_csi",29,1,9,0
OK
AT+CGATT=1
OK
POWER IN CAR SOLVED
I bought this, a stabilized 1,5A USB to 12v
Voltage Converter 5-12 V - Biltema.no
And after rumming a few AT commands to the modem my NR7101 boots perfectly every time 
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.
