Please run iperf3 -c 127.0.0.1 and post results here to make router database

BT Home Hub 5.0 Type A / Lantiq XWAY VRX268 / OpenWrt v22.03

Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 52694 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  36.8 MBytes   308 Mbits/sec    0   1.06 MBytes
[  5]   1.00-2.00   sec  39.7 MBytes   332 Mbits/sec    0   1.06 MBytes
[  5]   2.00-3.00   sec  37.7 MBytes   316 Mbits/sec    0   1.06 MBytes
[  5]   3.00-4.00   sec  37.3 MBytes   313 Mbits/sec    0   1.06 MBytes
[  5]   4.00-5.03   sec  36.7 MBytes   299 Mbits/sec    0   1.06 MBytes
[  5]   5.03-6.00   sec  32.0 MBytes   277 Mbits/sec    0   1.06 MBytes
[  5]   6.00-7.00   sec  35.1 MBytes   293 Mbits/sec    0   1.06 MBytes
[  5]   7.00-8.00   sec  35.3 MBytes   296 Mbits/sec    0   1.06 MBytes
[  5]   8.00-9.00   sec  37.7 MBytes   317 Mbits/sec    0   1.06 MBytes
[  5]   9.00-10.00  sec  39.7 MBytes   334 Mbits/sec    0   1.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   368 MBytes   309 Mbits/sec    0             sender
[  5]   0.00-10.00  sec   366 MBytes   307 Mbits/sec                  receiver

iperf Done.

NIPOGI AM07 (this mini PC has 2 x 2.5 Gbps I225-V Intel Ethernet).

Hostname OpenWrt
Model IP3 Technology CO.,Ltd. ACB19
Architecture AMD Ryzen 5 5560U with Radeon Graphics
Target Platform x86/64
Firmware Version OpenWrt 22.03.5 r20134-5f15225c1e / LuCI openwrt-22.03 branch git-23.119.80898-65ef406
Kernel Version 5.10.176
Local Time 2023-08-30 12:44:19
Uptime 0h 15m 21s
Load Average 0.23, 0.32, 0.22
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 47486 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  8.51 GBytes  73.1 Gbits/sec    0   1.06 MBytes
[  5]   1.00-2.00   sec  8.88 GBytes  76.3 Gbits/sec    3   1.25 MBytes
[  5]   2.00-3.00   sec  8.95 GBytes  76.9 Gbits/sec    5   1.25 MBytes
[  5]   3.00-4.00   sec  9.14 GBytes  78.5 Gbits/sec    5   1.25 MBytes
[  5]   4.00-5.00   sec  9.12 GBytes  78.4 Gbits/sec    0   1.25 MBytes
[  5]   5.00-6.00   sec  9.02 GBytes  77.4 Gbits/sec    4   1.25 MBytes
[  5]   6.00-7.00   sec  8.86 GBytes  76.1 Gbits/sec    0   1.25 MBytes
[  5]   7.00-8.00   sec  8.36 GBytes  71.8 Gbits/sec    0   1.25 MBytes
[  5]   8.00-9.00   sec  8.84 GBytes  75.9 Gbits/sec    3   1.25 MBytes
[  5]   9.00-10.00  sec  8.65 GBytes  74.3 Gbits/sec    2   1.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  88.3 GBytes  75.9 Gbits/sec   22             sender
[  5]   0.00-10.00  sec  88.3 GBytes  75.9 Gbits/sec                  receiver

iperf Done.

3 Likes

Linksys EA8300 / ipq40xx / OpenWrt 23.05.0-rc3

root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 36852 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   190 MBytes  1.59 Gbits/sec    0    639 KBytes
[  5]   1.00-2.01   sec   190 MBytes  1.59 Gbits/sec    0    639 KBytes
[  5]   2.01-3.00   sec   190 MBytes  1.60 Gbits/sec    0    895 KBytes
[  5]   3.00-4.00   sec   191 MBytes  1.60 Gbits/sec    0    895 KBytes
[  5]   4.00-5.00   sec   190 MBytes  1.60 Gbits/sec    0    895 KBytes
[  5]   5.00-6.00   sec   194 MBytes  1.62 Gbits/sec    0    895 KBytes
[  5]   6.00-7.00   sec   192 MBytes  1.61 Gbits/sec    0    895 KBytes
[  5]   7.00-8.00   sec   194 MBytes  1.63 Gbits/sec    0    895 KBytes
[  5]   8.00-9.00   sec   209 MBytes  1.76 Gbits/sec    0    895 KBytes
[  5]   9.00-10.00  sec   210 MBytes  1.76 Gbits/sec    0    895 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  1.90 GBytes  1.64 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  1.90 GBytes  1.64 Gbits/sec                  receiver

Dynalink DL -WRX36 23.05 snapshot

OpenWrt 23.05-SNAPSHOT, r23424-cdc8470aec

root@DL-WRX36:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 45222 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   852 MBytes  7.15 Gbits/sec    0   1.12 MBytes
[  5]   1.00-2.00   sec   829 MBytes  6.95 Gbits/sec    0   1.12 MBytes
[  5]   2.00-3.00   sec   826 MBytes  6.93 Gbits/sec    0   1.12 MBytes
[  5]   3.00-4.00   sec   826 MBytes  6.93 Gbits/sec    0   1.12 MBytes
[  5]   4.00-5.00   sec   821 MBytes  6.89 Gbits/sec    0   1.12 MBytes
[  5]   5.00-6.00   sec   808 MBytes  6.77 Gbits/sec    0   1.12 MBytes
[  5]   6.00-7.00   sec   821 MBytes  6.89 Gbits/sec    0   1.12 MBytes
[  5]   7.00-8.00   sec   818 MBytes  6.86 Gbits/sec    0   1.12 MBytes
[  5]   8.00-9.00   sec   818 MBytes  6.86 Gbits/sec    0   1.12 MBytes
[  5]   9.00-10.00  sec   815 MBytes  6.84 Gbits/sec    0   1.12 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  8.04 GBytes  6.91 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  8.03 GBytes  6.90 Gbits/sec                  receiver

iperf Done.
root@DL-WRX36:~#

Mercusys MR90X (Mediatek Filogic 830)

OpenWrt 23.05-rc3

root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 48928 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   772 MBytes  6.48 Gbits/sec    0   1.50 MBytes
[  5]   1.00-2.00   sec   769 MBytes  6.45 Gbits/sec    0   1.50 MBytes
[  5]   2.00-3.00   sec   766 MBytes  6.43 Gbits/sec    0   1.50 MBytes
[  5]   3.00-4.00   sec   756 MBytes  6.34 Gbits/sec    0   1.50 MBytes
[  5]   4.00-5.00   sec   774 MBytes  6.49 Gbits/sec    0   1.50 MBytes
[  5]   5.00-6.00   sec   770 MBytes  6.46 Gbits/sec    0   1.50 MBytes
[  5]   6.00-7.00   sec   769 MBytes  6.45 Gbits/sec    0   1.50 MBytes
[  5]   7.00-8.00   sec   770 MBytes  6.46 Gbits/sec    0   1.50 MBytes
[  5]   8.00-9.00   sec   764 MBytes  6.41 Gbits/sec    0   1.50 MBytes
[  5]   9.00-10.00  sec   755 MBytes  6.33 Gbits/sec    0   1.50 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  7.49 GBytes  6.43 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  7.48 GBytes  6.42 Gbits/sec                  receiver

Xiaomi Mi Router 3G

root@OpenWrt:~# ubus call system board
{
        "kernel": "5.10.176",
        "hostname": "OpenWrt",
        "system": "MediaTek MT7621 ver:1 eco:3",
        "model": "Xiaomi Mi Router 3G",
        "board_name": "xiaomi,mi-router-3g",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "22.03.5",
                "revision": "r20134-5f15225c1e",
                "target": "ramips/mt7621",
                "description": "OpenWrt 22.03.5 r20134-5f15225c1e"
        }
}
root@OpenWrt:~#
> root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 37444 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  68.8 MBytes   576 Mbits/sec    0    639 KBytes
[  5]   1.00-2.01   sec  68.8 MBytes   569 Mbits/sec    0    639 KBytes
[  5]   2.01-3.01   sec  68.8 MBytes   576 Mbits/sec    0    639 KBytes
[  5]   3.01-4.01   sec  71.2 MBytes   598 Mbits/sec    0    639 KBytes
[  5]   4.01-5.01   sec  71.2 MBytes   599 Mbits/sec    0    639 KBytes
[  5]   5.01-6.01   sec  71.2 MBytes   599 Mbits/sec    0    639 KBytes
[  5]   6.01-7.01   sec  67.5 MBytes   565 Mbits/sec    0    639 KBytes
[  5]   7.01-8.00   sec  71.2 MBytes   600 Mbits/sec    0    639 KBytes
[  5]   8.00-9.00   sec  71.2 MBytes   600 Mbits/sec    0    639 KBytes
[  5]   9.00-10.01  sec  72.5 MBytes   604 Mbits/sec    0    639 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec   702 MBytes   589 Mbits/sec    0             sender
[  5]   0.00-10.01  sec   702 MBytes   589 Mbits/sec                  receiver

iperf Done.

Netgear WNDR3700 v4

root@OpenWrt:~# ubus call system board
{
        "kernel": "5.15.127",
        "hostname": "OpenWrt",
        "system": "Atheros AR9344 rev 2",
        "model": "Netgear WNDR3700 v4",
        "board_name": "netgear,wndr3700-v4",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "23.05.0-rc3",
                "revision": "r23389-5deed175a5",
                "target": "ath79/nand",
                "description": "OpenWrt 23.05.0-rc3 r23389-5deed175a5"
        }
}
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 37990 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.01   sec  38.8 MBytes   323 Mbits/sec    0   1023 KBytes
[  5]   1.01-2.00   sec  37.8 MBytes   319 Mbits/sec    0   1023 KBytes
[  5]   2.00-3.00   sec  38.5 MBytes   323 Mbits/sec    0   1023 KBytes
[  5]   3.00-4.03   sec  39.1 MBytes   320 Mbits/sec    0   1023 KBytes
[  5]   4.03-5.01   sec  37.2 MBytes   318 Mbits/sec    0   1023 KBytes
[  5]   5.01-6.02   sec  38.8 MBytes   322 Mbits/sec    0   1023 KBytes
[  5]   6.02-7.00   sec  37.6 MBytes   319 Mbits/sec    0   1023 KBytes
[  5]   7.00-8.00   sec  38.4 MBytes   322 Mbits/sec    0   1023 KBytes
[  5]   8.00-9.01   sec  38.4 MBytes   321 Mbits/sec    0   1023 KBytes
[  5]   9.01-10.02  sec  38.2 MBytes   317 Mbits/sec    0   1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.02  sec   383 MBytes   320 Mbits/sec    0             sender
[  5]   0.00-10.03  sec   382 MBytes   319 Mbits/sec                  receiver

iperf Done.

BPI-R3

root@OpenWrt:~# ubus call system board
{
        "kernel": "5.15.127",
        "hostname": "OpenWrt",
        "system": "ARMv8 Processor rev 4",
        "model": "Bananapi BPI-R3",
        "board_name": "bananapi,bpi-r3",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "23.05.0-rc3",
                "revision": "r23389-5deed175a5",
                "target": "mediatek/filogic",
                "description": "OpenWrt 23.05.0-rc3 r23389-5deed175a5"
        }
}

root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 37774 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   771 MBytes  6.46 Gbits/sec    0   1023 KBytes
[  5]   1.00-2.00   sec   761 MBytes  6.39 Gbits/sec    0   1023 KBytes
[  5]   2.00-3.00   sec   756 MBytes  6.35 Gbits/sec    0   1023 KBytes
[  5]   3.00-4.00   sec   758 MBytes  6.35 Gbits/sec    0   1023 KBytes
[  5]   4.00-5.00   sec   759 MBytes  6.37 Gbits/sec    0   1023 KBytes
[  5]   5.00-6.00   sec   751 MBytes  6.30 Gbits/sec    0   1023 KBytes
[  5]   6.00-7.00   sec   755 MBytes  6.34 Gbits/sec    0   1023 KBytes
[  5]   7.00-8.00   sec   750 MBytes  6.29 Gbits/sec    0   1023 KBytes
[  5]   8.00-9.00   sec   754 MBytes  6.32 Gbits/sec    0   1023 KBytes
[  5]   9.00-10.00  sec   751 MBytes  6.30 Gbits/sec    0   1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  7.39 GBytes  6.35 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  7.38 GBytes  6.34 Gbits/sec                  receiver

iperf Done.


Chester Tech Repairs Cheetah

  • as shipped firmware -
 ubus call system board
{
        "kernel": "4.4.194",
        "hostname": "CAP_d41d8cd9",
        "system": "MediaTek MT7621 ver:1 eco:4",
        "model": "LEDE M01K21 board",
        "board_name": "M01K21",
        "release": {
                "distribution": "LEDE",
                "version": "17.01-SNAPSHOT",
                "revision": "2.2.2",
                "codename": "reboot",
                "target": "ramips\/mt7621",
                "description": "LEDE Reboot 17.01-SNAPSHOT 2.2.2"
        }
}


root@CAP_d41d8cd9:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  4] local 127.0.0.1 port 36700 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.01   sec  93.8 MBytes   778 Mbits/sec    0    959 KBytes
[  4]   1.01-2.01   sec  91.2 MBytes   768 Mbits/sec    0    959 KBytes
[  4]   2.01-3.01   sec  91.2 MBytes   761 Mbits/sec    0   1.62 MBytes
[  4]   3.01-4.01   sec  88.8 MBytes   745 Mbits/sec    0   1.62 MBytes
[  4]   4.01-5.01   sec  87.5 MBytes   740 Mbits/sec    0   1.62 MBytes
[  4]   5.01-6.00   sec  90.0 MBytes   756 Mbits/sec    0   1.62 MBytes
[  4]   6.00-7.01   sec  91.2 MBytes   762 Mbits/sec    0   1.62 MBytes
[  4]   7.01-8.00   sec  87.5 MBytes   739 Mbits/sec    0   1.62 MBytes
[  4]   8.00-9.01   sec  92.5 MBytes   768 Mbits/sec    0   1.62 MBytes
[  4]   9.01-10.01  sec  90.0 MBytes   759 Mbits/sec    0   1.62 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.01  sec   904 MBytes   758 Mbits/sec    0             sender
[  4]   0.00-10.01  sec   904 MBytes   758 Mbits/sec                  receiver

iperf Done.

ubus call system board
{
        "kernel": "6.1.52",
        "hostname": "dragonfly-dlwrx36",
        "system": "ARMv8 Processor rev 4",
        "model": "Dynalink DL-WRX36",
        "board_name": "dynalink,dl-wrx36",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "mda-OpenWrt",
                "version": "6.1.52-0",
                "revision": "r23930+31-6cf27094e9",
                "target": "qualcommax/ipq807x",
                "description": "mda-OpenWrt 6.1.52-0 r23930+31-6cf27094e9"
        }
}
iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 50370 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   890 MBytes  7.46 Gbits/sec    0   1.19 MBytes
[  5]   1.00-2.00   sec   895 MBytes  7.50 Gbits/sec    0   1.19 MBytes
[  5]   2.00-3.00   sec   898 MBytes  7.53 Gbits/sec    0   1.19 MBytes
[  5]   3.00-4.00   sec   900 MBytes  7.54 Gbits/sec    0   1.19 MBytes
[  5]   4.00-5.00   sec   901 MBytes  7.56 Gbits/sec    0   1.19 MBytes
[  5]   5.00-6.00   sec  1.01 GBytes  8.64 Gbits/sec    0   1.19 MBytes
[  5]   6.00-7.00   sec  1.03 GBytes  8.82 Gbits/sec    0   1.19 MBytes
[  5]   7.00-8.00   sec  1.09 GBytes  9.40 Gbits/sec    0   1.19 MBytes
[  5]   8.00-9.00   sec  1.04 GBytes  8.94 Gbits/sec    0   1.19 MBytes
[  5]   9.00-10.00  sec  1.15 GBytes  9.90 Gbits/sec    0   1.19 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  9.70 GBytes  8.33 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  9.70 GBytes  8.33 Gbits/sec                  receiver

1 Like

Netgear WAX220

root@WAX220:~# ubus call system board
{
        "kernel": "5.15.132",
        "hostname": "WAX220",
        "system": "ARMv8 Processor rev 4",
        "model": "Netgear WAX220",
        "board_name": "netgear,wax220",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "23.05.0-rc4",
                "revision": "r23482-7fe85ce1f2",
                "target": "mediatek/filogic",
                "description": "OpenWrt 23.05.0-rc4 r23482-7fe85ce1f2"
        }
}
root@WAX220:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 34614 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   810 MBytes  6.79 Gbits/sec    0   1.94 MBytes
[  5]   1.00-2.00   sec   799 MBytes  6.70 Gbits/sec    0   1.94 MBytes
[  5]   2.00-3.00   sec   796 MBytes  6.68 Gbits/sec    0   1.94 MBytes
[  5]   3.00-4.00   sec   795 MBytes  6.67 Gbits/sec    0   1.94 MBytes
[  5]   4.00-5.00   sec   795 MBytes  6.67 Gbits/sec    0   1.94 MBytes
[  5]   5.00-6.00   sec   791 MBytes  6.63 Gbits/sec    0   1.94 MBytes
[  5]   6.00-7.00   sec   791 MBytes  6.64 Gbits/sec    0   1.94 MBytes
[  5]   7.00-8.00   sec   792 MBytes  6.65 Gbits/sec    0   1.94 MBytes
[  5]   8.00-9.00   sec   790 MBytes  6.62 Gbits/sec    0   1.94 MBytes
[  5]   9.00-10.00  sec   792 MBytes  6.65 Gbits/sec    0   1.94 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  7.77 GBytes  6.67 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  7.76 GBytes  6.66 Gbits/sec                  receiver

iperf Done.

Ubiquity EdgerouterX

root@EdgerouterX:~# ubus call system board
{
        "kernel": "5.15.134",
        "hostname": "EdgerouterX",
        "system": "MediaTek MT7621 ver:1 eco:3",
        "model": "Ubiquiti EdgeRouter X",
        "board_name": "ubnt,edgerouter-x",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "23.05.0",
                "revision": "r23497-6637af95aa",
                "target": "ramips/mt7621",
                "description": "OpenWrt 23.05.0 r23497-6637af95aa"
        }
}
root@EdgerouterX:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 57910 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  80.0 MBytes   670 Mbits/sec    0   1023 KBytes       
[  5]   1.00-2.01   sec  80.0 MBytes   667 Mbits/sec    0   1023 KBytes       
[  5]   2.01-3.01   sec  76.2 MBytes   637 Mbits/sec    0   1023 KBytes       
[  5]   3.01-4.01   sec  80.0 MBytes   672 Mbits/sec    0   1023 KBytes       
[  5]   4.01-5.00   sec  77.5 MBytes   655 Mbits/sec    0   1023 KBytes       
[  5]   5.00-6.00   sec  80.0 MBytes   672 Mbits/sec    0   1023 KBytes       
[  5]   6.00-7.01   sec  81.2 MBytes   675 Mbits/sec    0   1023 KBytes       
[  5]   7.01-8.01   sec  80.0 MBytes   674 Mbits/sec    0   1023 KBytes       
[  5]   8.01-9.01   sec  81.2 MBytes   681 Mbits/sec    0   1023 KBytes       
[  5]   9.01-10.01  sec  77.5 MBytes   651 Mbits/sec    0   1023 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec   794 MBytes   665 Mbits/sec    0             sender
[  5]   0.00-10.01  sec   794 MBytes   665 Mbits/sec                  receiver

iperf Done.

Raspberry Pi CM4 + DFRobot Routerboard

root@router:~# ubus call system board
{
	"kernel": "5.15.134",
	"hostname": "router",
	"system": "ARMv8 Processor rev 3",
	"model": "Raspberry Pi Compute Module 4 Rev 1.1",
	"board_name": "raspberrypi,4-compute-module",
	"rootfs_type": "squashfs",
	"release": {
		"distribution": "OpenWrt",
		"version": "23.05.0",
		"revision": "r23497-6637af95aa",
		"target": "bcm27xx/bcm2711",
		"description": "OpenWrt 23.05.0 r23497-6637af95aa"
	}
}
root@router:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 39966 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  1.02 GBytes  8.71 Gbits/sec    0   1.31 MBytes       
[  5]   1.00-2.00   sec  1.03 GBytes  8.81 Gbits/sec    0   1.31 MBytes       
[  5]   2.00-3.00   sec  1.02 GBytes  8.80 Gbits/sec    0   1.31 MBytes       
[  5]   3.00-4.00   sec  1.02 GBytes  8.77 Gbits/sec    0   1.31 MBytes       
[  5]   4.00-5.00   sec  1.03 GBytes  8.81 Gbits/sec    0   1.31 MBytes       
[  5]   5.00-6.00   sec  1.03 GBytes  8.82 Gbits/sec    0   1.31 MBytes       
[  5]   6.00-7.00   sec  1.03 GBytes  8.81 Gbits/sec    0   1.31 MBytes       
[  5]   7.00-8.00   sec  1.02 GBytes  8.80 Gbits/sec    0   1.31 MBytes       
[  5]   8.00-9.00   sec  1.02 GBytes  8.79 Gbits/sec    0   1.31 MBytes       
[  5]   9.00-10.00  sec  1.02 GBytes  8.75 Gbits/sec    0   1.31 MBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  10.2 GBytes  8.79 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  10.2 GBytes  8.79 Gbits/sec                  receiver

ps: on Raspberry Pi4 (mediaserver running Debian Bookworm) results are much higher
Linux server2 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux

[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  16.8 GBytes  14.5 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  16.8 GBytes  14.5 Gbits/sec                  receiver
root@ax3000:~# ubus call system board
{
        "kernel": "5.15.134",
        "hostname": "ax3000",
        "system": "ARMv8 Processor rev 4",
        "model": "Routerich AX3000",
        "board_name": "routerich,ax3000",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "SNAPSHOT",
                "revision": "r24107+6-666c80d33f",
                "target": "mediatek/filogic",
                "description": "OpenWrt SNAPSHOT r24107+6-666c80d33f"
        }
}
root@ax3000:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 33644 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   588 MBytes  4.93 Gbits/sec    0   1023 KBytes
[  5]   1.00-2.00   sec   588 MBytes  4.93 Gbits/sec    0   1023 KBytes
[  5]   2.00-3.00   sec   587 MBytes  4.93 Gbits/sec    0   1023 KBytes
[  5]   3.00-4.00   sec   582 MBytes  4.88 Gbits/sec    0   1023 KBytes
[  5]   4.00-5.00   sec   593 MBytes  4.97 Gbits/sec    0   1023 KBytes
[  5]   5.00-6.00   sec   594 MBytes  4.98 Gbits/sec    0   1023 KBytes
[  5]   6.00-7.00   sec   595 MBytes  5.00 Gbits/sec    0   1023 KBytes
[  5]   7.00-8.00   sec   583 MBytes  4.89 Gbits/sec    0   1023 KBytes
[  5]   8.00-9.00   sec   590 MBytes  4.95 Gbits/sec    0   1023 KBytes
[  5]   9.00-10.00  sec   598 MBytes  5.01 Gbits/sec    0   1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  5.76 GBytes  4.95 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  5.76 GBytes  4.95 Gbits/sec                  receiver

iperf Done.
1 Like

Meraki MR42 Dumb AP

root@OpenWrt:~# ubus call system board
{
	"kernel": "5.15.134",
	"hostname": "OpenWrt",
	"system": "ARMv7 Processor rev 0 (v7l)",
	"model": "Meraki MR42",
	"board_name": "meraki,mr42",
	"rootfs_type": "squashfs",
	"release": {
		"distribution": "OpenWrt",
		"version": "23.05.0",
		"revision": "r23497-6637af95aa",
		"target": "ipq806x/generic",
		"description": "OpenWrt 23.05.0 r23497-6637af95aa"
	}
}
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 59062 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   556 MBytes  4.66 Gbits/sec    0   1.31 MBytes       
[  5]   1.00-2.00   sec   465 MBytes  3.90 Gbits/sec    0   1.31 MBytes       
[  5]   2.00-3.00   sec   479 MBytes  4.02 Gbits/sec    0   1.31 MBytes       
[  5]   3.00-4.00   sec   462 MBytes  3.88 Gbits/sec    0   1.31 MBytes       
[  5]   4.00-5.00   sec   485 MBytes  4.06 Gbits/sec    0   1.44 MBytes       
[  5]   5.00-6.00   sec   461 MBytes  3.87 Gbits/sec    0   1.44 MBytes       
[  5]   6.00-7.00   sec   479 MBytes  4.02 Gbits/sec    0   1.44 MBytes       
[  5]   7.00-8.00   sec   466 MBytes  3.90 Gbits/sec    0   1.44 MBytes       
[  5]   8.00-9.00   sec   478 MBytes  4.01 Gbits/sec    0   1.44 MBytes       
[  5]   9.00-10.00  sec   542 MBytes  4.55 Gbits/sec    0   1.50 MBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  4.76 GBytes  4.09 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  4.75 GBytes  4.08 Gbits/sec                  receiver

iperf Done.

[code] iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 55740 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 361 MBytes 3.03 Gbits/sec 0 1.75 MBytes
[ 5] 1.00-2.00 sec 359 MBytes 3.01 Gbits/sec 0 1.75 MBytes
[ 5] 2.00-3.00 sec 361 MBytes 3.03 Gbits/sec 0 1.75 MBytes
[ 5] 3.00-4.00 sec 360 MBytes 3.01 Gbits/sec 0 1.75 MBytes
[ 5] 4.00-5.00 sec 359 MBytes 3.01 Gbits/sec 0 1.75 MBytes
[ 5] 5.00-6.00 sec 360 MBytes 3.02 Gbits/sec 0 1.75 MBytes
[ 5] 6.00-7.00 sec 360 MBytes 3.02 Gbits/sec 0 1.75 MBytes
[ 5] 7.00-8.00 sec 362 MBytes 3.04 Gbits/sec 0 1.75 MBytes
[ 5] 8.00-9.00 sec 362 MBytes 3.04 Gbits/sec 0 1.75 MBytes
[ 5] 9.00-10.00 sec 360 MBytes 3.02 Gbits/sec 0 1.75 MBytes


[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 3.52 GBytes 3.02 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 3.52 GBytes 3.02 Gbits/sec receiver

iperf Done.
root@OpenWrt:/# ubus call system board
{
"kernel": "5.15.134",
"hostname": "OpenWrt",
"system": "ARMv8 Processor rev 4",
"model": "Globalscale Marvell ESPRESSOBin Ultra Board",
"board_name": "globalscale,espressobin-ultra",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "23.05-SNAPSHOT",
"revision": "r23551-5368066e9b",
"target": "mvebu/cortexa53",
"description": "OpenWrt 23.05-SNAPSHOT r23551-5368066e9b"
}
}
root@OpenWrt:/# [/code]

 root@MikroTik:~# ubus call system board
{
        "kernel": "5.15.132",
        "hostname": "MikroTik",   
        "system": "ARMv8 Processor rev 1",
        "model": "MikroTik RB5009",
        "board_name": "mikrotik,rb5009",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "23.05.0-rc4",
                "revision": "r23482-7fe85ce1f2",
                "target": "mvebu/cortexa72",
                "description": "OpenWrt 23.05.0-rc4 r23482-7fe85ce1f2"
        }
}

root@MikroTik:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 54024 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  1.01 GBytes  8.64 Gbits/sec    0   1.31 MBytes
[  5]   1.00-2.00   sec   999 MBytes  8.38 Gbits/sec    0   1.31 MBytes
[  5]   2.00-3.00   sec  1004 MBytes  8.42 Gbits/sec    0   1.31 MBytes
[  5]   3.00-4.00   sec  1001 MBytes  8.40 Gbits/sec    0   1.31 MBytes
[  5]   4.00-5.00   sec  1000 MBytes  8.39 Gbits/sec    0   1.31 MBytes
[  5]   5.00-6.00   sec   991 MBytes  8.31 Gbits/sec    0   1.31 MBytes
[  5]   6.00-7.00   sec   986 MBytes  8.27 Gbits/sec    0   1.31 MBytes
[  5]   7.00-8.00   sec   999 MBytes  8.37 Gbits/sec    0   1.31 MBytes
[  5]   8.00-9.00   sec  1005 MBytes  8.43 Gbits/sec    0   1.31 MBytes
[  5]   9.00-10.00  sec  1005 MBytes  8.43 Gbits/sec    0   1.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  9.79 GBytes  8.41 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  9.78 GBytes  8.40 Gbits/sec                  receiver

iperf Done.

Xiaomi AX9000

root@AX9_4:~# iperf3 -s -D && iperf3 -c 127.0.0.1 -u -b 15G
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 55863 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Total Datagrams
[  5]   0.00-1.00   sec  1.44 GBytes  12.4 Gbits/sec  47273
[  5]   1.00-2.00   sec  1.44 GBytes  12.4 Gbits/sec  47285
[  5]   2.00-3.00   sec  1.43 GBytes  12.3 Gbits/sec  46949
[  5]   3.00-4.00   sec  1.42 GBytes  12.2 Gbits/sec  46513
[  5]   4.00-5.00   sec  1.42 GBytes  12.2 Gbits/sec  46694
[  5]   5.00-6.00   sec  1.42 GBytes  12.2 Gbits/sec  46420
[  5]   6.00-7.00   sec  1.41 GBytes  12.1 Gbits/sec  46326
[  5]   7.00-8.00   sec  1.41 GBytes  12.1 Gbits/sec  46309
[  5]   8.00-9.00   sec  1.41 GBytes  12.1 Gbits/sec  46330
[  5]   9.00-10.00  sec  1.41 GBytes  12.1 Gbits/sec  46325
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-10.00  sec  14.2 GBytes  12.2 Gbits/sec  0.000 ms  0/466424 (0%)  sender
[  5]   0.00-10.00  sec  13.9 GBytes  11.9 Gbits/sec  0.011 ms  10473/466424 (2.2%)  receiver

iperf Done.
root@AX9_4:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 59550 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   784 MBytes  6.57 Gbits/sec    0   1.12 MBytes
[  5]   1.00-2.00   sec   762 MBytes  6.40 Gbits/sec    0   1.12 MBytes
[  5]   2.00-3.00   sec   772 MBytes  6.48 Gbits/sec    0   1.12 MBytes
[  5]   3.00-4.00   sec   765 MBytes  6.42 Gbits/sec    0   1.12 MBytes
[  5]   4.00-5.00   sec   770 MBytes  6.46 Gbits/sec    0   1.12 MBytes
[  5]   5.00-6.00   sec   716 MBytes  6.01 Gbits/sec    0   1.12 MBytes
[  5]   6.00-7.00   sec   766 MBytes  6.43 Gbits/sec    0   1.12 MBytes
[  5]   7.00-8.00   sec   770 MBytes  6.46 Gbits/sec    0   1.12 MBytes
[  5]   8.00-9.00   sec   754 MBytes  6.33 Gbits/sec    0   1.12 MBytes
[  5]   9.00-10.00  sec   768 MBytes  6.44 Gbits/sec    0   1.12 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  7.45 GBytes  6.40 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  7.44 GBytes  6.39 Gbits/sec                  receiver

root@RT-AX1800U:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 42112 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.01   sec  71.2 MBytes   592 Mbits/sec    0    895 KBytes       
[  5]   1.01-2.01   sec  68.8 MBytes   576 Mbits/sec    0   1.31 MBytes       
[  5]   2.01-3.01   sec  67.5 MBytes   565 Mbits/sec    0   1.31 MBytes       
[  5]   3.01-4.00   sec  66.2 MBytes   561 Mbits/sec    0   1.31 MBytes       
[  5]   4.00-5.01   sec  67.5 MBytes   561 Mbits/sec    0   1.31 MBytes       
[  5]   5.01-6.01   sec  67.5 MBytes   568 Mbits/sec    0   1.31 MBytes       
[  5]   6.01-7.00   sec  73.8 MBytes   620 Mbits/sec    0   1.31 MBytes       
[  5]   7.00-8.02   sec  73.8 MBytes   612 Mbits/sec    0   1.31 MBytes       
[  5]   8.02-9.01   sec  73.8 MBytes   620 Mbits/sec    0   1.31 MBytes       
[  5]   9.01-10.01  sec  73.8 MBytes   620 Mbits/sec    0   1.31 MBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec   704 MBytes   590 Mbits/sec    0             sender
[  5]   0.00-10.01  sec   704 MBytes   590 Mbits/sec                  receiver

iperf Done.
root@RT-AX1800U:~# ubus call system board
{
        "kernel": "5.15.134",
        "hostname": "RT-AX1800U",
        "system": "MediaTek MT7621 ver:1 eco:4",
        "model": "ASUS RT-AX53U",
        "board_name": "asus,rt-ax53u",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "23.05.0",
                "revision": "r23497-6637af95aa",
                "target": "ramips/mt7621",
                "description": "OpenWrt 23.05.0 r23497-6637af95aa"
        }
}

Redmi AX6000

root@OpenWrtAX6:~# ubus call system board
{
        "kernel": "5.15.134",
        "hostname": "OpenWrtAX6",
        "system": "ARMv8 Processor rev 4",
        "model": "Xiaomi Redmi Router AX6000 (stock layout)",
        "board_name": "xiaomi,redmi-router-ax6000-stock",
        "rootfs_type": "squashfs",
        "release": {
                "distribution": "OpenWrt",
                "version": "23.05.0",
                "revision": "r23497-6637af95aa",
                "target": "mediatek/filogic",
                "description": "OpenWrt 23.05.0 r23497-6637af95aa"
        }
}
root@OpenWrtAX6:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[  5] local 127.0.0.1 port 37422 connected to 127.0.0.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   718 MBytes  6.02 Gbits/sec    0   1.19 MBytes
[  5]   1.00-2.00   sec   714 MBytes  5.99 Gbits/sec    0   1.19 MBytes
[  5]   2.00-3.00   sec   711 MBytes  5.96 Gbits/sec    0   1.19 MBytes
[  5]   3.00-4.00   sec   711 MBytes  5.97 Gbits/sec    0   1.19 MBytes
[  5]   4.00-5.00   sec   714 MBytes  5.99 Gbits/sec    0   1.19 MBytes
[  5]   5.00-6.00   sec   710 MBytes  5.95 Gbits/sec    0   1.19 MBytes
[  5]   6.00-7.00   sec   712 MBytes  5.98 Gbits/sec    0   1.19 MBytes
[  5]   7.00-8.00   sec   709 MBytes  5.94 Gbits/sec    0   1.19 MBytes
[  5]   8.00-9.00   sec   705 MBytes  5.92 Gbits/sec    0   1.19 MBytes
[  5]   9.00-10.00  sec   710 MBytes  5.95 Gbits/sec    0   1.19 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  6.95 GBytes  5.97 Gbits/sec    0             sender
[  5]   0.00-10.00  sec  6.94 GBytes  5.96 Gbits/sec                  receiver

iperf Done.