$ neofetch
.',;::::;,'. fcc@fedora
.';:cccccccccccc:;,. ----------
.;cccccccccccccccccccccc;. OS: Fedora Linux 38 (Sway Prerelease) x86_64
.:cccccccccccccccccccccccccc:. Kernel: 6.2.0-0.rc8.57.fc38.x86_64
.;ccccccccccccc;.:dddl:.;ccccccc;. Uptime: 11 mins
.:ccccccccccccc;OWMKOOXMWd;ccccccc:. Packages: 1445 (rpm)
.:ccccccccccccc;KMMc;cc;xMMc:ccccccc:. Shell: bash 5.2.15
,cccccccccccccc;MMM.;cc;;WW::cccccccc, Resolution: 1920x1200
:cccccccccccccc;MMM.;cccccccccccccccc: Terminal: /dev/pts/1
:ccccccc;oxOOOo;MMM0OOk.;cccccccccccc: CPU: AMD A10-7850K Radeon R7 4C+8G (4) @ 3.700GHz
cccccc:0MMKxdd:;MMMkddc.;cccccccccccc; GPU: AMD ATI Radeon R7 Graphics
ccccc:XM0';cccc;MMM.;cccccccccccccccc' Memory: 931MiB / 14925MiB
ccccc;MMo;ccccc;MMW.;ccccccccccccccc;
ccccc;0MNc.ccc.xMMd:ccccccccccccccc;
cccccc;dNMWXXXWM0::cccccccccccccc:,
cccccccc;.:odl:.;cccccccccccccc:,.
:cccccccccccccccccccccccccccc:'.
.:cccccccccccccccccccccc:;,..
'::cccccccccccccc::;,.
$ iperf3 -s -D -1 && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 36946 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.88 GBytes 24.7 Gbits/sec 0 1023 KBytes
[ 5] 1.00-2.00 sec 3.11 GBytes 26.7 Gbits/sec 0 1023 KBytes
[ 5] 2.00-3.00 sec 3.13 GBytes 26.9 Gbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 3.19 GBytes 27.4 Gbits/sec 0 1.56 MBytes
[ 5] 4.00-5.00 sec 3.27 GBytes 28.1 Gbits/sec 0 1.56 MBytes
[ 5] 5.00-6.00 sec 3.22 GBytes 27.7 Gbits/sec 0 1.56 MBytes
[ 5] 6.00-7.00 sec 3.15 GBytes 27.1 Gbits/sec 0 1.56 MBytes
[ 5] 7.00-8.00 sec 2.67 GBytes 23.0 Gbits/sec 0 1.56 MBytes
[ 5] 8.00-9.00 sec 3.15 GBytes 27.0 Gbits/sec 0 1.56 MBytes
[ 5] 9.00-10.00 sec 3.26 GBytes 28.0 Gbits/sec 0 1.56 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 31.0 GBytes 26.7 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 31.0 GBytes 26.7 Gbits/sec receiver
iperf Done.
| Hostname | OpenWrt |
|---|---|
| Model | Linksys WRT1900ACS |
| Architecture | ARMv7 Processor rev 1 (v7l) |
| Target Platform | mvebu/cortexa9 |
| Firmware Version | OpenWrt SNAPSHOT r22124-bfa5e4e4eb / LuCI Master git-23.039.28596-41e9b8d |
| Kernel Version | 5.15.94 |
BusyBox v1.36.0 (2023-02-19 12:04:59 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r22124-bfa5e4e4eb
-----------------------------------------------------
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 44296 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 476 MBytes 3.99 Gbits/sec 0 4.43 MBytes
[ 5] 1.00-2.00 sec 474 MBytes 3.97 Gbits/sec 0 4.43 MBytes
[ 5] 2.00-3.00 sec 472 MBytes 3.97 Gbits/sec 0 4.43 MBytes
[ 5] 3.00-4.00 sec 474 MBytes 3.97 Gbits/sec 0 4.43 MBytes
[ 5] 4.00-5.00 sec 475 MBytes 3.98 Gbits/sec 0 4.43 MBytes
[ 5] 5.00-6.00 sec 474 MBytes 3.97 Gbits/sec 0 4.43 MBytes
[ 5] 6.00-7.00 sec 475 MBytes 3.98 Gbits/sec 0 4.43 MBytes
[ 5] 7.00-8.00 sec 474 MBytes 3.98 Gbits/sec 0 4.43 MBytes
[ 5] 8.00-9.00 sec 475 MBytes 3.99 Gbits/sec 0 4.43 MBytes
[ 5] 9.00-10.00 sec 474 MBytes 3.98 Gbits/sec 0 4.43 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.63 GBytes 3.98 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 4.63 GBytes 3.97 Gbits/sec receiver
iperf Done.
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 60784 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 869 MBytes 7.28 Gbits/sec 0 1023 KBytes
[ 5] 1.00-2.00 sec 484 MBytes 4.06 Gbits/sec 0 1023 KBytes
[ 5] 2.00-3.00 sec 485 MBytes 4.07 Gbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 486 MBytes 4.08 Gbits/sec 0 1023 KBytes
[ 5] 4.00-5.00 sec 488 MBytes 4.09 Gbits/sec 0 1023 KBytes
[ 5] 5.00-6.00 sec 488 MBytes 4.09 Gbits/sec 0 1023 KBytes
[ 5] 6.00-7.00 sec 489 MBytes 4.10 Gbits/sec 0 1023 KBytes
[ 5] 7.00-8.00 sec 486 MBytes 4.08 Gbits/sec 0 1023 KBytes
[ 5] 8.00-9.00 sec 488 MBytes 4.09 Gbits/sec 0 1023 KBytes
[ 5] 9.00-10.00 sec 1.02 GBytes 8.80 Gbits/sec 0 1.12 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 5.67 GBytes 4.87 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 5.67 GBytes 4.87 Gbits/sec receiver
iperf Done.
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 55372 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 488 MBytes 4.09 Gbits/sec 0 4.37 MBytes
[ 5] 1.00-2.00 sec 481 MBytes 4.03 Gbits/sec 0 4.37 MBytes
[ 5] 2.00-3.00 sec 486 MBytes 4.08 Gbits/sec 0 4.37 MBytes
[ 5] 3.00-4.00 sec 488 MBytes 4.09 Gbits/sec 0 4.37 MBytes
[ 5] 4.00-5.00 sec 488 MBytes 4.09 Gbits/sec 0 4.37 MBytes
[ 5] 5.00-6.00 sec 489 MBytes 4.10 Gbits/sec 0 4.37 MBytes
[ 5] 6.00-7.00 sec 489 MBytes 4.10 Gbits/sec 0 4.37 MBytes
[ 5] 7.00-8.00 sec 488 MBytes 4.09 Gbits/sec 0 4.37 MBytes
[ 5] 8.00-9.00 sec 489 MBytes 4.10 Gbits/sec 0 4.37 MBytes
[ 5] 9.00-10.00 sec 490 MBytes 4.11 Gbits/sec 0 4.37 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.76 GBytes 4.09 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 4.75 GBytes 4.08 Gbits/sec receiver
iperf Done.
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 58824 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.13 GBytes 9.71 Gbits/sec 0 2.06 MBytes
[ 5] 1.00-2.00 sec 486 MBytes 4.08 Gbits/sec 0 2.06 MBytes
[ 5] 2.00-3.00 sec 489 MBytes 4.10 Gbits/sec 0 2.06 MBytes
[ 5] 3.00-4.00 sec 488 MBytes 4.09 Gbits/sec 0 2.06 MBytes
[ 5] 4.00-5.00 sec 490 MBytes 4.11 Gbits/sec 0 2.06 MBytes
[ 5] 5.00-6.00 sec 491 MBytes 4.13 Gbits/sec 0 2.06 MBytes
[ 5] 6.00-7.00 sec 490 MBytes 4.11 Gbits/sec 0 2.06 MBytes
[ 5] 7.00-8.00 sec 491 MBytes 4.12 Gbits/sec 0 2.06 MBytes
[ 5] 8.00-9.00 sec 484 MBytes 4.05 Gbits/sec 0 2.06 MBytes
[ 5] 9.00-10.00 sec 739 MBytes 6.20 Gbits/sec 0 2.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 5.67 GBytes 4.87 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 5.66 GBytes 4.86 Gbits/sec receiver
iperf Done.
root@OpenWrt:~#
BusyBox v1.36.0 (2023-02-19 18:44:39 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r22117-7ae4716243
-----------------------------------------------------
root@OpenWrt:~# iperf3 -s -D -1 && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 36842 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 661 MBytes 5.54 Gbits/sec 0 1.19 MBytes
[ 5] 1.00-2.00 sec 656 MBytes 5.50 Gbits/sec 0 1.19 MBytes
[ 5] 2.00-3.00 sec 622 MBytes 5.22 Gbits/sec 0 1.56 MBytes
[ 5] 3.00-4.00 sec 646 MBytes 5.43 Gbits/sec 0 1.56 MBytes
[ 5] 4.00-5.00 sec 641 MBytes 5.38 Gbits/sec 0 1.56 MBytes
[ 5] 5.00-6.00 sec 649 MBytes 5.44 Gbits/sec 0 1.56 MBytes
[ 5] 6.00-7.00 sec 646 MBytes 5.42 Gbits/sec 0 1.56 MBytes
[ 5] 7.00-8.00 sec 642 MBytes 5.40 Gbits/sec 0 1.56 MBytes
[ 5] 8.00-9.00 sec 652 MBytes 5.47 Gbits/sec 0 1.56 MBytes
[ 5] 9.00-10.00 sec 650 MBytes 5.46 Gbits/sec 0 1.56 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 6.32 GBytes 5.43 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 6.31 GBytes 5.42 Gbits/sec receiver
iperf Done.
BusyBox v1.36.0 (2023-02-21 15:33:46 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r22130-2ade7e3dd4
-----------------------------------------------------
root@S1500NBN:~# iperf3 -s -D -1 && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 59694 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 83.8 MBytes 702 Mbits/sec 0 831 KBytes
[ 5] 1.00-2.00 sec 92.4 MBytes 773 Mbits/sec 0 1.31 MBytes
[ 5] 2.00-3.01 sec 94.9 MBytes 792 Mbits/sec 0 1.31 MBytes
[ 5] 3.01-4.02 sec 87.9 MBytes 732 Mbits/sec 0 1.31 MBytes
[ 5] 4.02-5.01 sec 78.8 MBytes 665 Mbits/sec 0 1.31 MBytes
[ 5] 5.01-6.01 sec 80.6 MBytes 676 Mbits/sec 0 1.31 MBytes
[ 5] 6.01-7.01 sec 95.0 MBytes 797 Mbits/sec 0 1.31 MBytes
[ 5] 7.01-8.01 sec 93.2 MBytes 781 Mbits/sec 0 1.31 MBytes
[ 5] 8.01-9.00 sec 86.2 MBytes 730 Mbits/sec 0 1.31 MBytes
[ 5] 9.00-10.00 sec 95.0 MBytes 796 Mbits/sec 0 1.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 888 MBytes 744 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 887 MBytes 744 Mbits/sec receiver
iperf Done.
root@S1500NBN:~#
root@R4040:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 39304 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 171 MBytes 1.43 Gbits/sec 0 1.19 MBytes
[ 5] 1.00-2.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 2.00-3.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 3.00-4.00 sec 180 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 4.00-5.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 5.00-6.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 6.00-7.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 7.00-8.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 8.00-9.01 sec 180 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 9.01-10.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.74 GBytes 1.49 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 1.74 GBytes 1.49 Gbits/sec receiver
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r22246-9d8374cadc
-----------------------------------------------------
root@OpenWrt:~# iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 46480 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 5.77 GBytes 49.6 Gbits/sec 0 895 KBytes
[ 5] 1.00-2.00 sec 5.85 GBytes 50.2 Gbits/sec 0 895 KBytes
[ 5] 2.00-3.00 sec 5.84 GBytes 50.2 Gbits/sec 0 895 KBytes
[ 5] 3.00-4.00 sec 5.81 GBytes 49.9 Gbits/sec 0 895 KBytes
[ 5] 4.00-5.00 sec 5.75 GBytes 49.4 Gbits/sec 0 1.12 MBytes
[ 5] 5.00-6.00 sec 5.67 GBytes 48.7 Gbits/sec 0 895 KBytes
[ 5] 6.00-7.00 sec 5.73 GBytes 49.2 Gbits/sec 0 1023 KBytes
[ 5] 7.00-8.00 sec 5.68 GBytes 48.8 Gbits/sec 0 1023 KBytes
[ 5] 8.00-9.00 sec 5.78 GBytes 49.7 Gbits/sec 0 895 KBytes
[ 5] 9.00-10.00 sec 5.72 GBytes 49.1 Gbits/sec 0 1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 57.6 GBytes 49.5 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 57.6 GBytes 49.5 Gbits/sec receiver
iperf Done.
GL-iNet Flint AX1800
Linux OpenWrt 5.15.86 #0 SMP Sun Mar 19 09:43:22 2023 aarch64 GNU/Linux
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 54148 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 651 MBytes 5.46 Gbits/sec 0 767 KBytes
[ 5] 1.00-2.00 sec 652 MBytes 5.47 Gbits/sec 0 895 KBytes
[ 5] 2.00-3.00 sec 660 MBytes 5.53 Gbits/sec 0 895 KBytes
[ 5] 3.00-4.00 sec 661 MBytes 5.55 Gbits/sec 0 895 KBytes
[ 5] 4.00-5.00 sec 648 MBytes 5.43 Gbits/sec 0 895 KBytes
[ 5] 5.00-6.00 sec 651 MBytes 5.47 Gbits/sec 0 895 KBytes
[ 5] 6.00-7.00 sec 661 MBytes 5.54 Gbits/sec 0 895 KBytes
[ 5] 7.00-8.00 sec 658 MBytes 5.52 Gbits/sec 0 895 KBytes
[ 5] 8.00-9.00 sec 669 MBytes 5.61 Gbits/sec 0 895 KBytes
[ 5] 9.00-10.00 sec 650 MBytes 5.45 Gbits/sec 1 895 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 6.41 GBytes 5.50 Gbits/sec 1 sender
[ 5] 0.00-10.00 sec 6.40 GBytes 5.50 Gbits/sec receiver
2 Likes
Linux ArcherC7v5 5.10.161 #0 Tue Jan 3 00:24:21 2023 mips GNU/Linux
root@ArcherC7v5:~# iperf3 -s -D && iperf3 -c 127.0.0.1 port 5201
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 34064 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 50.4 MBytes 416 Mbits/sec 0 1.06 MBytes
[ 5] 1.01-2.00 sec 49.2 MBytes 418 Mbits/sec 0 1.06 MBytes
[ 5] 2.00-3.00 sec 51.2 MBytes 430 Mbits/sec 0 1.06 MBytes
[ 5] 3.00-4.00 sec 49.9 MBytes 418 Mbits/sec 0 1.06 MBytes
[ 5] 4.00-5.00 sec 50.6 MBytes 425 Mbits/sec 0 1.06 MBytes
[ 5] 5.00-6.00 sec 53.4 MBytes 448 Mbits/sec 0 1.06 MBytes
[ 5] 6.00-7.00 sec 51.6 MBytes 433 Mbits/sec 0 1.06 MBytes
[ 5] 7.00-8.00 sec 53.5 MBytes 449 Mbits/sec 0 1.06 MBytes
[ 5] 8.00-9.00 sec 51.6 MBytes 433 Mbits/sec 0 1.06 MBytes
[ 5] 9.00-10.00 sec 52.6 MBytes 440 Mbits/sec 0 1.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 514 MBytes 431 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 513 MBytes 430 Mbits/sec receiver
iperf Done.
root@ArcherC7v5:~#
Dynalink DL-WRX36
OpenWrt SNAPSHOT, r22322-b844716158
iperf3 -s -D && iperf3 -c 127.0.0.1 port 5201
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 56642 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 830 MBytes 6.96 Gbits/sec 0 1.69 MBytes
[ 5] 1.00-2.00 sec 815 MBytes 6.84 Gbits/sec 0 1.69 MBytes
[ 5] 2.00-3.00 sec 818 MBytes 6.86 Gbits/sec 0 1.69 MBytes
[ 5] 3.00-4.00 sec 816 MBytes 6.85 Gbits/sec 0 1.69 MBytes
[ 5] 4.00-5.00 sec 818 MBytes 6.86 Gbits/sec 0 1.69 MBytes
[ 5] 5.00-6.00 sec 816 MBytes 6.85 Gbits/sec 0 1.69 MBytes
[ 5] 6.00-7.00 sec 812 MBytes 6.81 Gbits/sec 0 1.69 MBytes
[ 5] 7.00-8.00 sec 812 MBytes 6.81 Gbits/sec 0 1.69 MBytes
[ 5] 8.00-9.00 sec 811 MBytes 6.80 Gbits/sec 0 1.69 MBytes
[ 5] 9.00-10.00 sec 810 MBytes 6.80 Gbits/sec 0 1.69 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 7.97 GBytes 6.84 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 7.96 GBytes 6.84 Gbits/sec receiver
tp-link Archer C2600 v1.1
OpenWrt 22.03.3 APCCV (NSS) release
root@APCCV:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 45992 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 407 MBytes 3.41 Gbits/sec 0 1.25 MBytes
[ 5] 1.00-2.00 sec 404 MBytes 3.39 Gbits/sec 0 1.25 MBytes
[ 5] 2.00-3.00 sec 412 MBytes 3.46 Gbits/sec 0 1.25 MBytes
[ 5] 3.00-4.00 sec 412 MBytes 3.46 Gbits/sec 0 1.25 MBytes
[ 5] 4.00-5.00 sec 405 MBytes 3.39 Gbits/sec 0 1.25 MBytes
[ 5] 5.00-6.00 sec 416 MBytes 3.50 Gbits/sec 0 1.25 MBytes
[ 5] 6.00-7.00 sec 410 MBytes 3.44 Gbits/sec 0 1.25 MBytes
[ 5] 7.00-8.00 sec 405 MBytes 3.40 Gbits/sec 0 1.25 MBytes
[ 5] 8.00-9.00 sec 412 MBytes 3.46 Gbits/sec 0 1.25 MBytes
[ 5] 9.00-10.00 sec 412 MBytes 3.46 Gbits/sec 0 1.25 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.00 GBytes 3.44 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 4.00 GBytes 3.43 Gbits/sec receiver
iperf Done.
1 Like
GL-MT300N-V2
~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 41944 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 45.4 MBytes 377 Mbits/sec 0 1.06 MBytes
[ 5] 1.01-2.01 sec 44.1 MBytes 370 Mbits/sec 0 1.06 MBytes
[ 5] 2.01-3.01 sec 45.0 MBytes 377 Mbits/sec 0 1.06 MBytes
[ 5] 3.01-4.02 sec 45.4 MBytes 379 Mbits/sec 0 1.06 MBytes
[ 5] 4.02-5.00 sec 44.1 MBytes 375 Mbits/sec 0 1.06 MBytes
[ 5] 5.00-6.02 sec 45.6 MBytes 377 Mbits/sec 0 1.06 MBytes
[ 5] 6.02-7.02 sec 44.2 MBytes 372 Mbits/sec 0 1.06 MBytes
[ 5] 7.02-8.03 sec 44.8 MBytes 372 Mbits/sec 0 1.06 MBytes
[ 5] 8.03-9.02 sec 44.5 MBytes 376 Mbits/sec 0 1.06 MBytes
[ 5] 9.02-10.00 sec 43.2 MBytes 370 Mbits/sec 0 1.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 446 MBytes 374 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 446 MBytes 374 Mbits/sec receiver
iperf Done.
Netgear X10 (R9000)
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 55070 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.03 GBytes 8.85 Gbits/sec 0 1.31 MBytes
[ 5] 1.00-2.00 sec 1.13 GBytes 9.68 Gbits/sec 0 1.31 MBytes
[ 5] 2.00-3.00 sec 1.13 GBytes 9.69 Gbits/sec 0 1.31 MBytes
[ 5] 3.00-4.00 sec 1.09 GBytes 9.40 Gbits/sec 0 1.31 MBytes
[ 5] 4.00-5.00 sec 1.12 GBytes 9.66 Gbits/sec 0 1.31 MBytes
[ 5] 5.00-6.00 sec 1.13 GBytes 9.69 Gbits/sec 0 1.31 MBytes
[ 5] 6.00-7.00 sec 1.11 GBytes 9.56 Gbits/sec 0 1.31 MBytes
[ 5] 7.00-8.00 sec 1.12 GBytes 9.60 Gbits/sec 0 1.31 MBytes
[ 5] 8.00-9.00 sec 1.06 GBytes 9.09 Gbits/sec 0 1.31 MBytes
[ 5] 9.00-10.00 sec 1.13 GBytes 9.72 Gbits/sec 0 1.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 11.1 GBytes 9.49 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 11.1 GBytes 9.49 Gbits/sec receiver
iperf Done.
TP-Link EAP615-Wall v1 - OpenWrt 22.03.3
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 77.5 MBytes 650 Mbits/sec 0 895 KBytes
[ 5] 1.00-2.01 sec 81.2 MBytes 675 Mbits/sec 0 895 KBytes
[ 5] 2.01-3.00 sec 80.0 MBytes 676 Mbits/sec 0 895 KBytes
[ 5] 3.00-4.01 sec 82.5 MBytes 683 Mbits/sec 0 895 KBytes
[ 5] 4.01-5.01 sec 80.0 MBytes 677 Mbits/sec 0 895 KBytes
[ 5] 5.01-6.01 sec 81.2 MBytes 678 Mbits/sec 0 895 KBytes
[ 5] 6.01-7.00 sec 77.5 MBytes 656 Mbits/sec 0 895 KBytes
[ 5] 7.00-8.01 sec 80.0 MBytes 666 Mbits/sec 0 895 KBytes
[ 5] 8.01-9.01 sec 78.8 MBytes 659 Mbits/sec 0 895 KBytes
[ 5] 9.01-10.00 sec 78.8 MBytes 667 Mbits/sec 0 895 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 798 MBytes 669 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 798 MBytes 669 Mbits/sec receiver
For some reason OpenWrt is considerably slower than Debian on RPi 4
Raspberry Pi 4 - OpenWrt 22.03.3
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 761 MBytes 6.38 Gbits/sec 0 1.12 MBytes
[ 5] 1.00-2.00 sec 750 MBytes 6.29 Gbits/sec 0 1.12 MBytes
[ 5] 2.00-3.00 sec 774 MBytes 6.50 Gbits/sec 0 1.12 MBytes
[ 5] 3.00-4.00 sec 775 MBytes 6.49 Gbits/sec 0 1.12 MBytes
[ 5] 4.00-5.00 sec 821 MBytes 6.90 Gbits/sec 0 1.12 MBytes
[ 5] 5.00-6.00 sec 758 MBytes 6.35 Gbits/sec 0 1.12 MBytes
[ 5] 6.00-7.00 sec 749 MBytes 6.29 Gbits/sec 0 1.12 MBytes
[ 5] 7.00-8.00 sec 796 MBytes 6.68 Gbits/sec 0 1.12 MBytes
[ 5] 8.00-9.00 sec 744 MBytes 6.24 Gbits/sec 0 1.12 MBytes
[ 5] 9.00-10.00 sec 748 MBytes 6.27 Gbits/sec 0 1.12 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 7.50 GBytes 6.44 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 7.49 GBytes 6.43 Gbits/sec receiver
Raspberry Pi 4 - Debian Bullseye
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.12 GBytes 9.60 Gbits/sec 0 1.50 MBytes
[ 5] 1.00-2.00 sec 1.12 GBytes 9.64 Gbits/sec 0 1.50 MBytes
[ 5] 2.00-3.00 sec 1.13 GBytes 9.71 Gbits/sec 0 1.50 MBytes
[ 5] 3.00-4.00 sec 1.12 GBytes 9.62 Gbits/sec 0 1.50 MBytes
[ 5] 4.00-5.00 sec 1.12 GBytes 9.58 Gbits/sec 0 1.50 MBytes
[ 5] 5.00-6.00 sec 1.12 GBytes 9.59 Gbits/sec 0 1.50 MBytes
[ 5] 6.00-7.00 sec 1.11 GBytes 9.54 Gbits/sec 0 1.50 MBytes
[ 5] 7.00-8.00 sec 1.10 GBytes 9.46 Gbits/sec 0 1.50 MBytes
[ 5] 8.00-9.00 sec 1.06 GBytes 9.11 Gbits/sec 0 1.50 MBytes
[ 5] 9.00-10.00 sec 1.06 GBytes 9.08 Gbits/sec 0 1.50 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 11.1 GBytes 9.49 Gbits/sec 0 sender
[ 5] 0.00-10.04 sec 11.1 GBytes 9.45 Gbits/sec receiver
Raspberry Pi 4 - Debian Bookworm
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.41 GBytes 12.1 Gbits/sec 0 1.31 MBytes
[ 5] 1.00-2.00 sec 1.32 GBytes 11.4 Gbits/sec 0 1.31 MBytes
[ 5] 2.00-3.00 sec 1.46 GBytes 12.5 Gbits/sec 0 1.31 MBytes
[ 5] 3.00-4.00 sec 1.46 GBytes 12.5 Gbits/sec 0 1.31 MBytes
[ 5] 4.00-5.00 sec 1.44 GBytes 12.4 Gbits/sec 0 1.31 MBytes
[ 5] 5.00-6.00 sec 1.33 GBytes 11.4 Gbits/sec 0 1.31 MBytes
[ 5] 6.00-7.00 sec 1.55 GBytes 13.3 Gbits/sec 0 1.31 MBytes
[ 5] 7.00-8.00 sec 1.42 GBytes 12.2 Gbits/sec 0 1.31 MBytes
[ 5] 8.00-9.00 sec 1.40 GBytes 12.0 Gbits/sec 0 1.31 MBytes
[ 5] 9.00-10.00 sec 1.41 GBytes 12.1 Gbits/sec 0 1.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 14.2 GBytes 12.2 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 14.2 GBytes 12.2 Gbits/sec receiver
openwrt x86_64 custom build
OpenWrt SNAPSHOT, r22278-7dceef5ee5
Core i5-4690K@4.5Ghz
8gb@1800Mhz single channel ram
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 38452 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 9.01 GBytes 77.4 Gbits/sec 0 1.19 MBytes
[ 5] 1.00-2.00 sec 9.26 GBytes 79.5 Gbits/sec 0 1.19 MBytes
[ 5] 2.00-3.00 sec 9.25 GBytes 79.5 Gbits/sec 0 1.19 MBytes
[ 5] 3.00-4.00 sec 9.34 GBytes 80.2 Gbits/sec 0 1.19 MBytes
[ 5] 4.00-5.00 sec 9.34 GBytes 80.2 Gbits/sec 0 1.19 MBytes
[ 5] 5.00-6.00 sec 9.33 GBytes 80.1 Gbits/sec 0 1.19 MBytes
[ 5] 6.00-7.00 sec 9.34 GBytes 80.2 Gbits/sec 0 1.19 MBytes
[ 5] 7.00-8.00 sec 9.35 GBytes 80.3 Gbits/sec 0 1.19 MBytes
[ 5] 8.00-9.00 sec 9.31 GBytes 80.0 Gbits/sec 0 1.19 MBytes
[ 5] 9.00-10.00 sec 9.32 GBytes 80.1 Gbits/sec 0 1.19 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 92.8 GBytes 79.8 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 92.8 GBytes 79.8 Gbits/sec receiver
iperf Done.
root@OpenWrt:~# uname -a
Linux OpenWrt 5.15.98 #0 SMP Wed Mar 15 00:44:29 2023 x86_64 GNU/Linux
-----------------------------------------------------
OpenWrt 22.03.3, r20028-43d71ad93e
-----------------------------------------------------
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 42490 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 49.8 MBytes 417 Mbits/sec 0 639 KBytes
[ 5] 1.00-2.00 sec 49.1 MBytes 413 Mbits/sec 0 639 KBytes
[ 5] 2.00-3.00 sec 49.8 MBytes 417 Mbits/sec 0 639 KBytes
[ 5] 3.00-4.00 sec 50.1 MBytes 421 Mbits/sec 0 639 KBytes
[ 5] 4.00-5.00 sec 50.4 MBytes 423 Mbits/sec 0 639 KBytes
[ 5] 5.00-6.00 sec 50.0 MBytes 420 Mbits/sec 0 639 KBytes
[ 5] 6.00-7.00 sec 50.5 MBytes 423 Mbits/sec 0 639 KBytes
[ 5] 7.00-8.00 sec 49.1 MBytes 412 Mbits/sec 0 639 KBytes
[ 5] 8.00-9.00 sec 49.8 MBytes 418 Mbits/sec 0 639 KBytes
[ 5] 9.00-10.00 sec 49.9 MBytes 419 Mbits/sec 0 639 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 499 MBytes 418 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 498 MBytes 418 Mbits/sec receiver
iperf Done.
root@OpenWrt:~#
Xiaomi r4ac
ASUS SRT-AC1900 (Google OnHub)
-----------------------------------------------------
OpenWrt SNAPSHOT, r22418+16-708a507af0
-----------------------------------------------------
root@onhub:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 40940 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 330 MBytes 2.77 Gbits/sec 0 1.12 MBytes
[ 5] 1.00-2.00 sec 322 MBytes 2.71 Gbits/sec 0 1.12 MBytes
[ 5] 2.00-3.00 sec 325 MBytes 2.72 Gbits/sec 0 1.12 MBytes
[ 5] 3.00-4.00 sec 326 MBytes 2.74 Gbits/sec 0 1.19 MBytes
[ 5] 4.00-5.00 sec 330 MBytes 2.77 Gbits/sec 0 1.19 MBytes
[ 5] 5.00-6.00 sec 330 MBytes 2.77 Gbits/sec 0 1.19 MBytes
[ 5] 6.00-7.00 sec 326 MBytes 2.74 Gbits/sec 0 1.19 MBytes
[ 5] 7.00-8.00 sec 330 MBytes 2.77 Gbits/sec 0 1.19 MBytes
[ 5] 8.00-9.00 sec 322 MBytes 2.71 Gbits/sec 0 1.19 MBytes
[ 5] 9.00-10.00 sec 328 MBytes 2.75 Gbits/sec 0 1.19 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 3.19 GBytes 2.74 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 3.19 GBytes 2.74 Gbits/sec receiver
iperf Done.
D-Link DIR-882 rev.A1
(MediaTek MT7621AT/MT7615N)
-----------------------------------------------------
OpenWrt SNAPSHOT, r22456-75e78bcaab
-----------------------------------------------------
root@Grumpy:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 45952 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.02 sec 77.5 MBytes 641 Mbits/sec 0 959 KBytes
[ 5] 1.02-2.01 sec 84.8 MBytes 715 Mbits/sec 0 959 KBytes
[ 5] 2.01-3.00 sec 79.1 MBytes 670 Mbits/sec 0 959 KBytes
[ 5] 3.00-4.00 sec 75.0 MBytes 626 Mbits/sec 0 959 KBytes
[ 5] 4.00-5.01 sec 75.0 MBytes 629 Mbits/sec 0 959 KBytes
[ 5] 5.01-6.01 sec 75.0 MBytes 630 Mbits/sec 0 959 KBytes
[ 5] 6.01-7.01 sec 76.6 MBytes 641 Mbits/sec 0 959 KBytes
[ 5] 7.01-8.01 sec 73.8 MBytes 620 Mbits/sec 0 959 KBytes
[ 5] 8.01-9.01 sec 75.0 MBytes 624 Mbits/sec 0 959 KBytes
[ 5] 9.01-10.00 sec 73.8 MBytes 626 Mbits/sec 0 959 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 766 MBytes 642 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 766 MBytes 642 Mbits/sec receiver
iperf Done.
Intel(R) Celeron(R) J4125 CPU @ 2.00GHz, one of those Chinese boxes with 2.5Gbps ports. Running stock x86 22.03.03
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 35940 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 3.44 GBytes 29.6 Gbits/sec 0 1.25 MBytes
[ 5] 1.00-2.00 sec 3.40 GBytes 29.2 Gbits/sec 0 1.25 MBytes
[ 5] 2.00-3.00 sec 3.50 GBytes 30.1 Gbits/sec 0 1.25 MBytes
[ 5] 3.00-4.00 sec 3.50 GBytes 30.1 Gbits/sec 0 1.25 MBytes
[ 5] 4.00-5.00 sec 3.50 GBytes 30.1 Gbits/sec 0 1.25 MBytes
[ 5] 5.00-6.00 sec 3.50 GBytes 30.1 Gbits/sec 0 1.25 MBytes
[ 5] 6.00-7.00 sec 3.50 GBytes 30.1 Gbits/sec 0 1.25 MBytes
[ 5] 7.00-8.00 sec 3.51 GBytes 30.2 Gbits/sec 0 1.25 MBytes
[ 5] 8.00-9.00 sec 3.50 GBytes 30.1 Gbits/sec 0 1.25 MBytes
[ 5] 9.00-10.00 sec 3.51 GBytes 30.1 Gbits/sec 0 1.25 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 34.9 GBytes 30.0 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 34.9 GBytes 30.0 Gbits/sec receiver
iperf Done.
Linksys WRT3200ACM on SNAPSHOT r22537:
[ 5] local 127.0.0.1 port 46966 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.36 GBytes 11.7 Gbits/sec 0 639 KBytes
[ 5] 1.00-2.00 sec 1.38 GBytes 11.8 Gbits/sec 0 895 KBytes
[ 5] 2.00-3.00 sec 1.38 GBytes 11.8 Gbits/sec 0 895 KBytes
[ 5] 3.00-4.00 sec 1.38 GBytes 11.9 Gbits/sec 0 895 KBytes
[ 5] 4.00-5.00 sec 1.39 GBytes 11.9 Gbits/sec 0 895 KBytes
[ 5] 5.00-6.00 sec 1.39 GBytes 11.9 Gbits/sec 0 895 KBytes
[ 5] 6.00-7.00 sec 1.38 GBytes 11.9 Gbits/sec 0 895 KBytes
[ 5] 7.00-8.00 sec 1.37 GBytes 11.8 Gbits/sec 0 895 KBytes
[ 5] 8.00-9.00 sec 1.38 GBytes 11.9 Gbits/sec 0 895 KBytes
[ 5] 9.00-10.00 sec 1.39 GBytes 11.9 Gbits/sec 0 895 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 13.8 GBytes 11.8 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 13.8 GBytes 11.8 Gbits/sec receiver