sol
January 6, 2023, 4:54pm
187
Here's the Linksys E8450.
root@vasishta:~# uname -a
Linux vasishta 5.10.146 #0 SMP Fri Oct 14 22:44:41 2022 aarch64 GNU/Linux
root@vasishta:~# grep name /etc/board.json
"name": "Linksys E8450 (UBI)"
root@vasishta:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 56592 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 384 MBytes 3.22 Gbits/sec 0 1.94 MBytes
[ 5] 1.00-2.00 sec 386 MBytes 3.23 Gbits/sec 0 1.94 MBytes
[ 5] 2.00-3.00 sec 388 MBytes 3.25 Gbits/sec 0 1.94 MBytes
[ 5] 3.00-4.00 sec 401 MBytes 3.36 Gbits/sec 0 1.94 MBytes
[ 5] 4.00-5.00 sec 392 MBytes 3.30 Gbits/sec 0 1.94 MBytes
[ 5] 5.00-6.00 sec 399 MBytes 3.34 Gbits/sec 0 1.94 MBytes
[ 5] 6.00-7.00 sec 395 MBytes 3.31 Gbits/sec 0 1.94 MBytes
[ 5] 7.00-8.00 sec 392 MBytes 3.30 Gbits/sec 0 1.94 MBytes
[ 5] 8.00-9.00 sec 400 MBytes 3.35 Gbits/sec 0 1.94 MBytes
[ 5] 9.00-10.00 sec 400 MBytes 3.36 Gbits/sec 0 1.94 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 3.85 GBytes 3.30 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 3.84 GBytes 3.30 Gbits/sec receiver
Archer A7 v5
Linux garageBridgeBackup 5.10.146 #0 Fri Oct 14 22:44:41 2022 mips GNU/Linux
root@garageBridgeBackup:~# grep name /etc/board.json
"name": "TP-Link Archer A7 v5"
"name": "WAN",
"name": "LAN1",
"name": "LAN2",
"name": "LAN3",
"name": "LAN4",
root@garageBridgeBackup:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 54030 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 63.7 MBytes 535 Mbits/sec 0 1023 KBytes
[ 5] 1.00-2.00 sec 65.2 MBytes 547 Mbits/sec 0 1023 KBytes
[ 5] 2.00-3.00 sec 64.9 MBytes 543 Mbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 64.0 MBytes 536 Mbits/sec 0 1023 KBytes
[ 5] 4.00-5.00 sec 64.3 MBytes 541 Mbits/sec 0 1023 KBytes
[ 5] 5.00-6.00 sec 64.6 MBytes 541 Mbits/sec 0 1023 KBytes
[ 5] 6.00-7.00 sec 64.5 MBytes 541 Mbits/sec 0 1023 KBytes
[ 5] 7.00-8.00 sec 64.3 MBytes 540 Mbits/sec 0 1023 KBytes
[ 5] 8.00-9.00 sec 64.4 MBytes 539 Mbits/sec 0 1023 KBytes
[ 5] 9.00-10.00 sec 64.8 MBytes 543 Mbits/sec 0 1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 645 MBytes 541 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 643 MBytes 539 Mbits/sec receiver
Hostname
OpenWrt
Model
ZOTAC ZBOX-EN760
Architecture
Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz
Target Platform
x86/64
Firmware Version
OpenWrt 22.03.3 r20028-43d71ad93e / LuCI openwrt-22.03 branch git-22.361.69894-438c598
Kernel Version
5.10.161
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 36908 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 3.95 GBytes 33.9 Gbits/sec 0 1.25 MBytes
[ 5] 1.00-2.00 sec 4.17 GBytes 35.9 Gbits/sec 0 1.25 MBytes
[ 5] 2.00-3.00 sec 4.19 GBytes 36.0 Gbits/sec 0 1.25 MBytes
[ 5] 3.00-4.00 sec 4.19 GBytes 36.0 Gbits/sec 0 1.25 MBytes
[ 5] 4.00-5.00 sec 4.20 GBytes 36.1 Gbits/sec 0 1.25 MBytes
[ 5] 5.00-6.00 sec 4.19 GBytes 36.0 Gbits/sec 0 1.25 MBytes
[ 5] 6.00-7.00 sec 4.18 GBytes 35.9 Gbits/sec 0 1.25 MBytes
[ 5] 7.00-8.00 sec 4.14 GBytes 35.6 Gbits/sec 0 1.25 MBytes
[ 5] 8.00-9.00 sec 4.19 GBytes 36.0 Gbits/sec 0 1.25 MBytes
[ 5] 9.00-10.00 sec 4.19 GBytes 36.0 Gbits/sec 0 1.25 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 41.6 GBytes 35.7 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 41.6 GBytes 35.7 Gbits/sec receiver
It's an old Mini PC that has 2 Gigabit Ethernet ports. The NVIDIA GeForce GTX 860M does not help here.
2 specimens here:
Lantiq xrx200 @ 500Mhz in AVM FB7362SL ( PSB80920EL V1.2)
root@7362sl:~# uname -a
Linux 7362sl 5.10.111 #0 SMP Fri Apr 22 07:23:49 2022 mips GNU/Linux
root@7362sl:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 34856 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 57.5 MBytes 477 Mbits/sec 0 895 KBytes
[ 5] 1.01-2.01 sec 55.0 MBytes 461 Mbits/sec 0 895 KBytes
[ 5] 2.01-3.02 sec 56.2 MBytes 469 Mbits/sec 0 895 KBytes
[ 5] 3.02-4.01 sec 55.0 MBytes 464 Mbits/sec 0 895 KBytes
[ 5] 4.01-5.01 sec 55.0 MBytes 462 Mbits/sec 0 895 KBytes
[ 5] 5.01-6.01 sec 56.2 MBytes 472 Mbits/sec 0 895 KBytes
[ 5] 6.01-7.02 sec 56.2 MBytes 466 Mbits/sec 0 895 KBytes
[ 5] 7.02-8.01 sec 55.0 MBytes 465 Mbits/sec 0 895 KBytes
[ 5] 8.01-9.00 sec 55.0 MBytes 466 Mbits/sec 0 895 KBytes
[ 5] 9.00-10.02 sec 56.2 MBytes 465 Mbits/sec 0 895 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.02 sec 558 MBytes 467 Mbits/sec 0 sender
[ 5] 0.00-10.02 sec 558 MBytes 467 Mbits/sec receiver
and mt7621dat @1100Mhz (1200Mhz DDR3) powering my MR1800X
root@mr1800x:~# uname -a
Linux mr1800x 5.10.154 #0 SMP Sat Nov 12 19:26:48 2022 mips GNU/Linux
root@mr1800x:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 36676 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 76.2 MBytes 633 Mbits/sec 0 959 KBytes
[ 5] 1.01-2.02 sec 76.2 MBytes 637 Mbits/sec 0 959 KBytes
[ 5] 2.02-3.01 sec 76.2 MBytes 640 Mbits/sec 0 959 KBytes
[ 5] 3.01-4.01 sec 76.2 MBytes 642 Mbits/sec 0 959 KBytes
[ 5] 4.01-5.01 sec 76.2 MBytes 638 Mbits/sec 0 959 KBytes
[ 5] 5.01-6.01 sec 76.2 MBytes 638 Mbits/sec 0 959 KBytes
[ 5] 6.01-7.00 sec 73.8 MBytes 627 Mbits/sec 0 959 KBytes
[ 5] 7.00-8.00 sec 76.2 MBytes 637 Mbits/sec 0 959 KBytes
[ 5] 8.00-9.01 sec 76.2 MBytes 638 Mbits/sec 0 959 KBytes
[ 5] 9.01-10.01 sec 76.2 MBytes 636 Mbits/sec 0 959 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 760 MBytes 637 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 760 MBytes 637 Mbits/sec receiver
Intel i7 9900k
OpenWrt 22.03.2, r19803-9a599fee93
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 11.3 GBytes 97.1 Gbits/sec 0 1.87 MBytes
[ 5] 1.00-2.00 sec 11.3 GBytes 97.1 Gbits/sec 0 1.87 MBytes
[ 5] 2.00-3.00 sec 11.1 GBytes 95.1 Gbits/sec 0 1.87 MBytes
[ 5] 3.00-4.00 sec 11.1 GBytes 95.7 Gbits/sec 0 1.87 MBytes
[ 5] 4.00-5.00 sec 11.2 GBytes 95.8 Gbits/sec 0 1.87 MBytes
[ 5] 5.00-6.00 sec 11.0 GBytes 94.7 Gbits/sec 0 1.87 MBytes
[ 5] 6.00-7.00 sec 11.0 GBytes 94.1 Gbits/sec 0 1.87 MBytes
[ 5] 7.00-8.00 sec 11.1 GBytes 95.2 Gbits/sec 0 1.87 MBytes
[ 5] 8.00-9.00 sec 11.1 GBytes 95.5 Gbits/sec 0 1.87 MBytes
[ 5] 9.00-10.00 sec 11.0 GBytes 94.8 Gbits/sec 0 1.87 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 111 GBytes 95.5 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 111 GBytes 95.5 Gbits/sec receiver
1 Like
aprate
January 21, 2023, 10:35pm
192
OpenWrt 22.03.0, r19685-512e76967f
-----------------------------------------------------
@EdgeRouter:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 54328 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 73.8 MBytes 614 Mbits/sec 0 639 KBytes
[ 5] 1.01-2.01 sec 73.8 MBytes 614 Mbits/sec 0 639 KBytes
[ 5] 2.01-3.01 sec 72.5 MBytes 610 Mbits/sec 0 1.25 MBytes
[ 5] 3.01-4.01 sec 72.5 MBytes 612 Mbits/sec 0 1.25 MBytes
[ 5] 4.01-5.00 sec 71.2 MBytes 598 Mbits/sec 0 1.25 MBytes
[ 5] 5.00-6.01 sec 77.5 MBytes 645 Mbits/sec 0 1.25 MBytes
[ 5] 6.01-7.01 sec 72.5 MBytes 609 Mbits/sec 0 1.25 MBytes
[ 5] 7.01-8.01 sec 72.5 MBytes 609 Mbits/sec 0 1.25 MBytes
[ 5] 8.01-9.00 sec 71.2 MBytes 603 Mbits/sec 0 1.25 MBytes
[ 5] 9.00-10.01 sec 72.5 MBytes 601 Mbits/sec 0 1.25 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 730 MBytes 612 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 730 MBytes 611 Mbits/sec receiver
iperf Done.
@EdgeRouter:~# grep name /etc/board.json
"name": "Ubiquiti EdgeRouter X SFP"
Xiaomi AX3600
BusyBox v1.36.0 (2023-01-19 12:26:15 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r21861-5dee596501
-----------------------------------------------------
> root@dg-airport:~# iperf3 -s -D && iperf3 -c 127.0.0.1
> Connecting to host 127.0.0.1, port 5201
> [ 5] local 127.0.0.1 port 54828 connected to 127.0.0.1 port 5201
> [ ID] Interval Transfer Bitrate Retr Cwnd
> [ 5] 0.00-1.00 sec 598 MBytes 5.01 Gbits/sec 0 1.06 MBytes
> [ 5] 1.00-2.00 sec 602 MBytes 5.05 Gbits/sec 0 1.06 MBytes
> [ 5] 2.00-3.00 sec 599 MBytes 5.03 Gbits/sec 0 1.06 MBytes
> [ 5] 3.00-4.00 sec 599 MBytes 5.03 Gbits/sec 0 1.06 MBytes
> [ 5] 4.00-5.00 sec 600 MBytes 5.04 Gbits/sec 0 1.06 MBytes
> [ 5] 5.00-6.00 sec 605 MBytes 5.08 Gbits/sec 0 1.06 MBytes
> [ 5] 6.00-7.00 sec 608 MBytes 5.10 Gbits/sec 0 1.06 MBytes
> [ 5] 7.00-8.00 sec 606 MBytes 5.08 Gbits/sec 0 1.06 MBytes
> [ 5] 8.00-9.00 sec 604 MBytes 5.06 Gbits/sec 0 1.06 MBytes
> [ 5] 9.00-10.00 sec 604 MBytes 5.06 Gbits/sec 0 1.06 MBytes
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval Transfer Bitrate Retr
> [ 5] 0.00-10.00 sec 5.88 GBytes 5.05 Gbits/sec 0 sender
> [ 5] 0.00-10.00 sec 5.88 GBytes 5.05 Gbits/sec receiver
>
> iperf Done.
> root@dg-airport:~# uname -a
> Linux dg-airport 5.15.88 #0 SMP Thu Jan 19 12:26:15 2023 aarch64 GNU/Linux
> root@dg-airport:~# grep name /etc/board.json
> "name": "Xiaomi AX3600"
> "name": "WAN",
NanoPi R6S (Only FriendlyElec OpenWrt 22.03.3 version at the moment)
root@FriendlyWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 56664 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 3.01 GBytes 25.8 Gbits/sec 0 1.19 MBytes
[ 5] 1.00-2.00 sec 4.38 GBytes 37.6 Gbits/sec 0 1.19 MBytes
[ 5] 2.00-3.00 sec 4.37 GBytes 37.6 Gbits/sec 0 1.19 MBytes
[ 5] 3.00-4.00 sec 4.37 GBytes 37.6 Gbits/sec 0 1.19 MBytes
[ 5] 4.00-5.00 sec 4.38 GBytes 37.6 Gbits/sec 0 1.19 MBytes
[ 5] 5.00-6.00 sec 4.37 GBytes 37.6 Gbits/sec 0 1.19 MBytes
[ 5] 6.00-7.00 sec 4.37 GBytes 37.5 Gbits/sec 0 1.19 MBytes
[ 5] 7.00-8.00 sec 4.36 GBytes 37.5 Gbits/sec 0 1.19 MBytes
[ 5] 8.00-9.00 sec 4.37 GBytes 37.5 Gbits/sec 0 1.19 MBytes
[ 5] 9.00-10.00 sec 4.36 GBytes 37.5 Gbits/sec 0 1.19 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 42.3 GBytes 36.4 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 42.3 GBytes 36.3 Gbits/sec receiver
iperf Done.
root@FriendlyWrt:~# uname -a
Linux FriendlyWrt 5.10.110 #1 SMP Sat Jan 14 14:27:46 CST 2023 aarch64 GNU/Linux
2 Likes
Xiaomi AX9000
OpenWrt SNAPSHOT, r21963-3cfa465387
root@ax9000:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 39188 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 865 MBytes 7.26 Gbits/sec 0 1.25 MBytes
[ 5] 1.00-2.00 sec 860 MBytes 7.21 Gbits/sec 0 1.25 MBytes
[ 5] 2.00-3.00 sec 858 MBytes 7.19 Gbits/sec 0 1.25 MBytes
[ 5] 3.00-4.00 sec 861 MBytes 7.22 Gbits/sec 0 1.25 MBytes
[ 5] 4.00-5.00 sec 856 MBytes 7.19 Gbits/sec 0 1.25 MBytes
[ 5] 5.00-6.00 sec 858 MBytes 7.19 Gbits/sec 0 1.25 MBytes
[ 5] 6.00-7.00 sec 856 MBytes 7.18 Gbits/sec 0 1.25 MBytes
[ 5] 7.00-8.00 sec 855 MBytes 7.17 Gbits/sec 0 1.25 MBytes
[ 5] 8.00-9.00 sec 855 MBytes 7.17 Gbits/sec 0 1.25 MBytes
[ 5] 9.00-10.00 sec 856 MBytes 7.18 Gbits/sec 0 1.25 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 8.38 GBytes 7.20 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 8.37 GBytes 7.19 Gbits/sec receiver
QNAP QHora-301W
-----------------------------------------------------
OpenWrt SNAPSHOT, r21900-ac21dff5b6
-----------------------------------------------------
root@Qnap:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 57422 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 761 MBytes 6.38 Gbits/sec 0 1.06 MBytes
[ 5] 1.00-2.00 sec 745 MBytes 6.25 Gbits/sec 0 1.06 MBytes
[ 5] 2.00-3.00 sec 746 MBytes 6.26 Gbits/sec 0 1.06 MBytes
[ 5] 3.00-4.00 sec 754 MBytes 6.32 Gbits/sec 0 1.06 MBytes
[ 5] 4.00-5.00 sec 746 MBytes 6.26 Gbits/sec 0 1.06 MBytes
[ 5] 5.00-6.00 sec 748 MBytes 6.27 Gbits/sec 0 1.06 MBytes
[ 5] 6.00-7.00 sec 739 MBytes 6.20 Gbits/sec 0 1.06 MBytes
[ 5] 7.00-8.00 sec 751 MBytes 6.30 Gbits/sec 0 1.06 MBytes
[ 5] 8.00-9.00 sec 742 MBytes 6.23 Gbits/sec 0 1.06 MBytes
[ 5] 9.00-10.00 sec 744 MBytes 6.24 Gbits/sec 0 1.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 7.30 GBytes 6.27 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 7.29 GBytes 6.26 Gbits/sec receiver
WAX206
root@HalloWLAN:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 58666 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 628 MBytes 5.25 Gbits/sec 0 1.87 MBytes
[ 5] 1.00-2.00 sec 682 MBytes 5.73 Gbits/sec 0 1.87 MBytes
[ 5] 2.00-3.00 sec 644 MBytes 5.40 Gbits/sec 0 1.87 MBytes
[ 5] 3.00-4.00 sec 636 MBytes 5.34 Gbits/sec 0 1.87 MBytes
[ 5] 4.00-5.00 sec 689 MBytes 5.78 Gbits/sec 0 1.87 MBytes
[ 5] 5.00-6.00 sec 741 MBytes 6.22 Gbits/sec 0 2.00 MBytes
[ 5] 6.00-7.00 sec 705 MBytes 5.91 Gbits/sec 0 2.00 MBytes
[ 5] 7.00-8.00 sec 905 MBytes 7.59 Gbits/sec 0 2.00 MBytes
[ 5] 8.00-9.00 sec 919 MBytes 7.71 Gbits/sec 0 2.00 MBytes
[ 5] 9.00-10.00 sec 854 MBytes 7.17 Gbits/sec 0 2.00 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 7.23 GBytes 6.21 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 7.23 GBytes 6.21 Gbits/sec receiver
iperf Done.
harrydg
February 3, 2023, 10:49pm
197
My celeron j3160, 2 virtual cpus and 512MB ram running in kvm on proxmox
root@damien:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 49118 connected to 127.0.0.1 port 5
201
[ ID] Interval Transfer Bitrate Retr Cw
nd
[ 5] 0.00-1.00 sec 1.01 GBytes 8.65 Gbits/sec 0 1.
31 MBytes
[ 5] 1.00-2.00 sec 1.01 GBytes 8.67 Gbits/sec 0 1.
44 MBytes
[ 5] 2.00-3.00 sec 1.03 GBytes 8.80 Gbits/sec 0 1.
62 MBytes
[ 5] 3.00-4.00 sec 1.10 GBytes 9.49 Gbits/sec 0 1.
81 MBytes
[ 5] 4.00-5.00 sec 1016 MBytes 8.53 Gbits/sec 0 2.
44 MBytes
[ 5] 5.00-6.00 sec 1.01 GBytes 8.66 Gbits/sec 0 2.
44 MBytes
[ 5] 6.00-7.00 sec 1.04 GBytes 8.92 Gbits/sec 0 2.
44 MBytes
[ 5] 7.00-8.00 sec 1.03 GBytes 8.86 Gbits/sec 0 2.
44 MBytes
[ 5] 8.00-9.00 sec 1.03 GBytes 8.81 Gbits/sec 0 2.
44 MBytes
[ 5] 9.00-10.00 sec 995 MBytes 8.35 Gbits/sec 0 2.
44 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.2 GBytes 8.77 Gbits/sec 0
sender
[ 5] 0.00-10.00 sec 10.2 GBytes 8.77 Gbits/sec
receiver
iperf Done.
sampson
February 4, 2023, 12:35pm
198
Dynalink DL-WRX36
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 44100 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 825 MBytes 6.92 Gbits/sec 0 1.31 MBytes
[ 5] 1.00-2.00 sec 814 MBytes 6.83 Gbits/sec 0 1.31 MBytes
[ 5] 2.00-3.00 sec 818 MBytes 6.85 Gbits/sec 0 1.31 MBytes
[ 5] 3.00-4.00 sec 816 MBytes 6.85 Gbits/sec 0 1.31 MBytes
[ 5] 4.00-5.00 sec 815 MBytes 6.84 Gbits/sec 0 1.31 MBytes
[ 5] 5.00-6.00 sec 815 MBytes 6.84 Gbits/sec 0 1.31 MBytes
[ 5] 6.00-7.00 sec 814 MBytes 6.83 Gbits/sec 0 1.31 MBytes
[ 5] 7.00-8.00 sec 812 MBytes 6.82 Gbits/sec 0 1.31 MBytes
[ 5] 8.00-9.00 sec 814 MBytes 6.83 Gbits/sec 0 1.31 MBytes
[ 5] 9.00-10.00 sec 812 MBytes 6.82 Gbits/sec 0 1.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 7.96 GBytes 6.84 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 7.96 GBytes 6.83 Gbits/sec receiver
iperf Done.
Highest on this thread so far?
harrydg
February 5, 2023, 9:43am
200
this is an odd one... my gaming rig is also built around the i7-12700. I decided to run the same in Wintendo 11 and i got 1/3 of the numbers (i dare not say "performance" ;)):
Connecting to host 127.0.0.1, port 5201
[ 4] local 127.0.0.1 port 58515 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 4.04 GBytes 34.6 Gbits/sec
[ 4] 1.00-2.00 sec 3.99 GBytes 34.3 Gbits/sec
[ 4] 2.00-3.00 sec 4.17 GBytes 35.8 Gbits/sec
[ 4] 3.00-4.00 sec 4.19 GBytes 36.0 Gbits/sec
[ 4] 4.00-5.00 sec 4.19 GBytes 36.0 Gbits/sec
[ 4] 5.00-6.00 sec 4.18 GBytes 35.9 Gbits/sec
[ 4] 6.00-7.00 sec 4.18 GBytes 35.9 Gbits/sec
[ 4] 7.00-8.00 sec 4.19 GBytes 36.0 Gbits/sec
[ 4] 8.00-9.00 sec 4.19 GBytes 36.0 Gbits/sec
[ 4] 9.00-10.00 sec 4.19 GBytes 36.0 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 41.5 GBytes 35.7 Gbits/sec sender
[ 4] 0.00-10.00 sec 41.5 GBytes 35.7 Gbits/sec receiver
iperf Done.
Update: I decided to start my "tails" and try native linux. I get an average throughput of 80Gbit/s. So that leads me to assume that you have DDR5 memory, which is faster? If not, i need to see where the difference comes from. And it also shows "weird" numbers for Windows. pointless... but interesting...
sampson
February 5, 2023, 10:30am
201
TP-Link TL-WDR3600 v1
[ 5] local 127.0.0.1 port 35276 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.02 sec 44.0 MBytes 364 Mbits/sec 0 1023 KBytes
[ 5] 1.02-2.01 sec 42.0 MBytes 356 Mbits/sec 0 1023 KBytes
[ 5] 2.01-3.00 sec 42.3 MBytes 356 Mbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 42.2 MBytes 354 Mbits/sec 0 1023 KBytes
[ 5] 4.00-5.01 sec 43.0 MBytes 358 Mbits/sec 0 1023 KBytes
[ 5] 5.01-6.01 sec 42.4 MBytes 357 Mbits/sec 0 1023 KBytes
[ 5] 6.01-7.01 sec 42.4 MBytes 356 Mbits/sec 0 1023 KBytes
[ 5] 7.01-8.01 sec 42.3 MBytes 355 Mbits/sec 0 1023 KBytes
[ 5] 8.01-9.00 sec 42.3 MBytes 355 Mbits/sec 0 1023 KBytes
[ 5] 9.00-10.00 sec 42.2 MBytes 355 Mbits/sec 0 1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 425 MBytes 357 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 424 MBytes 355 Mbits/sec receiver
iperf Done.
sampson
February 5, 2023, 12:13pm
202
tp-link Archer C5 v4
iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 48258 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 42.6 MBytes 357 Mbits/sec 0 639 KBytes
[ 5] 1.00-2.00 sec 40.6 MBytes 341 Mbits/sec 0 639 KBytes
[ 5] 2.00-3.00 sec 39.9 MBytes 335 Mbits/sec 0 639 KBytes
[ 5] 3.00-4.00 sec 41.1 MBytes 344 Mbits/sec 0 639 KBytes
[ 5] 4.00-5.00 sec 40.8 MBytes 342 Mbits/sec 0 639 KBytes
[ 5] 5.00-6.00 sec 42.5 MBytes 357 Mbits/sec 0 639 KBytes
[ 5] 6.00-7.00 sec 41.0 MBytes 344 Mbits/sec 0 639 KBytes
[ 5] 7.00-8.01 sec 41.8 MBytes 347 Mbits/sec 0 639 KBytes
[ 5] 8.01-9.00 sec 41.2 MBytes 349 Mbits/sec 0 639 KBytes
[ 5] 9.00-10.00 sec 41.7 MBytes 350 Mbits/sec 0 639 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 413 MBytes 347 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 413 MBytes 346 Mbits/sec receiver
iperf Done.
D-Link DAP-X1860
-----------------------------------------------------
OpenWrt SNAPSHOT, r22071-3c66ac7e22
-----------------------------------------------------
root@AP_Varasto:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 47342 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 76.1 MBytes 635 Mbits/sec 0 1023 KBytes
[ 5] 1.01-2.01 sec 76.1 MBytes 633 Mbits/sec 0 1023 KBytes
[ 5] 2.01-3.00 sec 75.0 MBytes 637 Mbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 65.0 MBytes 544 Mbits/sec 0 1023 KBytes
[ 5] 4.00-5.01 sec 68.8 MBytes 572 Mbits/sec 0 1023 KBytes
[ 5] 5.01-6.01 sec 76.0 MBytes 639 Mbits/sec 0 1023 KBytes
[ 5] 6.01-7.01 sec 78.8 MBytes 658 Mbits/sec 0 1023 KBytes
[ 5] 7.01-8.01 sec 72.4 MBytes 611 Mbits/sec 0 1023 KBytes
[ 5] 8.01-9.01 sec 67.5 MBytes 562 Mbits/sec 0 1023 KBytes
[ 5] 9.01-10.01 sec 67.5 MBytes 572 Mbits/sec 0 1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 723 MBytes 606 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 723 MBytes 606 Mbits/sec receiver
Wavlink Quantum DAX (aka Phicomm K3)
OpenWrt 22.03.3, r20028-43d71ad93e
-----------------------------------------------------
root@OpenWrt:~# grep name /etc/board.json
"name": "Phicomm K3"
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 42666 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 171 MBytes 1.43 Gbits/sec 0 639 KBytes
[ 5] 1.00-2.00 sec 172 MBytes 1.45 Gbits/sec 0 639 KBytes
[ 5] 2.00-3.00 sec 172 MBytes 1.44 Gbits/sec 0 639 KBytes
[ 5] 3.00-4.01 sec 172 MBytes 1.44 Gbits/sec 0 639 KBytes
[ 5] 4.01-5.00 sec 171 MBytes 1.44 Gbits/sec 0 639 KBytes
[ 5] 5.00-6.00 sec 165 MBytes 1.38 Gbits/sec 0 1.06 MBytes
[ 5] 6.00-7.00 sec 172 MBytes 1.44 Gbits/sec 0 1.06 MBytes
[ 5] 7.00-8.00 sec 172 MBytes 1.45 Gbits/sec 0 1.06 MBytes
[ 5] 8.00-9.01 sec 174 MBytes 1.45 Gbits/sec 0 1.06 MBytes
[ 5] 9.01-10.01 sec 172 MBytes 1.45 Gbits/sec 0 1.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 1.68 GBytes 1.44 Gbits/sec 0 sender
[ 5] 0.00-10.01 sec 1.68 GBytes 1.44 Gbits/sec receiver
iperf Done.
Hostname
OpenWrt
Model
BESSTAR TECH LIMITED TH50
Architecture
11th Gen Intel(R) Core(TM) i5-11320H @ 3.20GHz
Target Platform
x86/64
Firmware Version
OpenWrt 22.03.3 r20028-43d71ad93e / LuCI openwrt-22.03 branch git-23.039.29681-007c243
Kernel Version
5.10.161
Local Time
2023-02-17 13:56:49
Uptime
0h 35m 43s
Load Average
0.06, 0.11, 0.04
A.K.A. Minisforum DeskMini TH50
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 33376 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 9.69 GBytes 83.2 Gbits/sec 0 1.31 MBytes
[ 5] 1.00-2.00 sec 10.1 GBytes 86.5 Gbits/sec 0 1.31 MBytes
[ 5] 2.00-3.00 sec 10.1 GBytes 86.5 Gbits/sec 0 1.44 MBytes
[ 5] 3.00-4.00 sec 10.1 GBytes 86.7 Gbits/sec 0 1.44 MBytes
[ 5] 4.00-5.00 sec 10.2 GBytes 87.4 Gbits/sec 0 1.44 MBytes
[ 5] 5.00-6.00 sec 10.0 GBytes 86.3 Gbits/sec 0 1.44 MBytes
[ 5] 6.00-7.00 sec 10.0 GBytes 86.2 Gbits/sec 0 1.44 MBytes
[ 5] 7.00-8.00 sec 10.0 GBytes 86.0 Gbits/sec 0 1.44 MBytes
[ 5] 8.00-9.00 sec 10.0 GBytes 86.2 Gbits/sec 0 1.44 MBytes
[ 5] 9.00-10.00 sec 10.0 GBytes 86.0 Gbits/sec 0 1.44 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 100 GBytes 86.1 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 100 GBytes 86.1 Gbits/sec receiver
Hi, you can add -1 in the server section of the command, to shut down the server after the client's test (else it remains running in background)
iperf3 -s -D -1 && iperf3 -c 127.0.0.1
3 Likes