Banana PI R4
ubus call system board
{
"kernel": "6.1.82",
"hostname": "OpenWrt",
"system": "ARMv8 Processor rev 0",
"model": "Bananapi BPI-R4",
"board_name": "bananapi,bpi-r4",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "SNAPSHOT",
"revision": "r25690-b1d579f174",
"target": "mediatek/filogic",
"description": "OpenWrt SNAPSHOT r25690-b1d579f174"
}
}
root@OpenWrt:/wg-bench# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 41460 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.23 GBytes 19.2 Gbits/sec 0 639 KBytes
[ 5] 1.00-2.00 sec 2.22 GBytes 19.1 Gbits/sec 0 639 KBytes
[ 5] 2.00-3.00 sec 2.23 GBytes 19.2 Gbits/sec 0 639 KBytes
[ 5] 3.00-4.00 sec 2.08 GBytes 17.9 Gbits/sec 0 639 KBytes
[ 5] 4.00-5.00 sec 2.23 GBytes 19.1 Gbits/sec 0 639 KBytes
[ 5] 5.00-6.00 sec 2.24 GBytes 19.3 Gbits/sec 0 639 KBytes
[ 5] 6.00-7.00 sec 2.21 GBytes 19.0 Gbits/sec 0 639 KBytes
[ 5] 7.00-8.00 sec 2.19 GBytes 18.8 Gbits/sec 0 639 KBytes
[ 5] 8.00-9.00 sec 2.24 GBytes 19.2 Gbits/sec 0 639 KBytes
[ 5] 9.00-10.00 sec 2.22 GBytes 19.1 Gbits/sec 0 639 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 22.4 GBytes 19.2 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 22.4 GBytes 19.2 Gbits/sec receiver