sampson
February 4, 2023, 12:35pm
198
Dynalink DL-WRX36
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 44100 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 825 MBytes 6.92 Gbits/sec 0 1.31 MBytes
[ 5] 1.00-2.00 sec 814 MBytes 6.83 Gbits/sec 0 1.31 MBytes
[ 5] 2.00-3.00 sec 818 MBytes 6.85 Gbits/sec 0 1.31 MBytes
[ 5] 3.00-4.00 sec 816 MBytes 6.85 Gbits/sec 0 1.31 MBytes
[ 5] 4.00-5.00 sec 815 MBytes 6.84 Gbits/sec 0 1.31 MBytes
[ 5] 5.00-6.00 sec 815 MBytes 6.84 Gbits/sec 0 1.31 MBytes
[ 5] 6.00-7.00 sec 814 MBytes 6.83 Gbits/sec 0 1.31 MBytes
[ 5] 7.00-8.00 sec 812 MBytes 6.82 Gbits/sec 0 1.31 MBytes
[ 5] 8.00-9.00 sec 814 MBytes 6.83 Gbits/sec 0 1.31 MBytes
[ 5] 9.00-10.00 sec 812 MBytes 6.82 Gbits/sec 0 1.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 7.96 GBytes 6.84 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 7.96 GBytes 6.83 Gbits/sec receiver
iperf Done.
Lynx
February 4, 2023, 10:19pm
199
Highest on this thread so far?
harrydg
February 5, 2023, 9:43am
200
this is an odd one... my gaming rig is also built around the i7-12700. I decided to run the same in Wintendo 11 and i got 1/3 of the numbers (i dare not say "performance" ;)):
Connecting to host 127.0.0.1, port 5201
[ 4] local 127.0.0.1 port 58515 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 4.04 GBytes 34.6 Gbits/sec
[ 4] 1.00-2.00 sec 3.99 GBytes 34.3 Gbits/sec
[ 4] 2.00-3.00 sec 4.17 GBytes 35.8 Gbits/sec
[ 4] 3.00-4.00 sec 4.19 GBytes 36.0 Gbits/sec
[ 4] 4.00-5.00 sec 4.19 GBytes 36.0 Gbits/sec
[ 4] 5.00-6.00 sec 4.18 GBytes 35.9 Gbits/sec
[ 4] 6.00-7.00 sec 4.18 GBytes 35.9 Gbits/sec
[ 4] 7.00-8.00 sec 4.19 GBytes 36.0 Gbits/sec
[ 4] 8.00-9.00 sec 4.19 GBytes 36.0 Gbits/sec
[ 4] 9.00-10.00 sec 4.19 GBytes 36.0 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 41.5 GBytes 35.7 Gbits/sec sender
[ 4] 0.00-10.00 sec 41.5 GBytes 35.7 Gbits/sec receiver
iperf Done.
Update: I decided to start my "tails" and try native linux. I get an average throughput of 80Gbit/s. So that leads me to assume that you have DDR5 memory, which is faster? If not, i need to see where the difference comes from. And it also shows "weird" numbers for Windows. pointless... but interesting...
sampson
February 5, 2023, 10:30am
201
TP-Link TL-WDR3600 v1
[ 5] local 127.0.0.1 port 35276 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.02 sec 44.0 MBytes 364 Mbits/sec 0 1023 KBytes
[ 5] 1.02-2.01 sec 42.0 MBytes 356 Mbits/sec 0 1023 KBytes
[ 5] 2.01-3.00 sec 42.3 MBytes 356 Mbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 42.2 MBytes 354 Mbits/sec 0 1023 KBytes
[ 5] 4.00-5.01 sec 43.0 MBytes 358 Mbits/sec 0 1023 KBytes
[ 5] 5.01-6.01 sec 42.4 MBytes 357 Mbits/sec 0 1023 KBytes
[ 5] 6.01-7.01 sec 42.4 MBytes 356 Mbits/sec 0 1023 KBytes
[ 5] 7.01-8.01 sec 42.3 MBytes 355 Mbits/sec 0 1023 KBytes
[ 5] 8.01-9.00 sec 42.3 MBytes 355 Mbits/sec 0 1023 KBytes
[ 5] 9.00-10.00 sec 42.2 MBytes 355 Mbits/sec 0 1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 425 MBytes 357 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 424 MBytes 355 Mbits/sec receiver
iperf Done.
sampson
February 5, 2023, 12:13pm
202
tp-link Archer C5 v4
iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 48258 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 42.6 MBytes 357 Mbits/sec 0 639 KBytes
[ 5] 1.00-2.00 sec 40.6 MBytes 341 Mbits/sec 0 639 KBytes
[ 5] 2.00-3.00 sec 39.9 MBytes 335 Mbits/sec 0 639 KBytes
[ 5] 3.00-4.00 sec 41.1 MBytes 344 Mbits/sec 0 639 KBytes
[ 5] 4.00-5.00 sec 40.8 MBytes 342 Mbits/sec 0 639 KBytes
[ 5] 5.00-6.00 sec 42.5 MBytes 357 Mbits/sec 0 639 KBytes
[ 5] 6.00-7.00 sec 41.0 MBytes 344 Mbits/sec 0 639 KBytes
[ 5] 7.00-8.01 sec 41.8 MBytes 347 Mbits/sec 0 639 KBytes
[ 5] 8.01-9.00 sec 41.2 MBytes 349 Mbits/sec 0 639 KBytes
[ 5] 9.00-10.00 sec 41.7 MBytes 350 Mbits/sec 0 639 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 413 MBytes 347 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 413 MBytes 346 Mbits/sec receiver
iperf Done.
D-Link DAP-X1860
-----------------------------------------------------
OpenWrt SNAPSHOT, r22071-3c66ac7e22
-----------------------------------------------------
root@AP_Varasto:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 47342 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 76.1 MBytes 635 Mbits/sec 0 1023 KBytes
[ 5] 1.01-2.01 sec 76.1 MBytes 633 Mbits/sec 0 1023 KBytes
[ 5] 2.01-3.00 sec 75.0 MBytes 637 Mbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 65.0 MBytes 544 Mbits/sec 0 1023 KBytes
[ 5] 4.00-5.01 sec 68.8 MBytes 572 Mbits/sec 0 1023 KBytes
[ 5] 5.01-6.01 sec 76.0 MBytes 639 Mbits/sec 0 1023 KBytes
[ 5] 6.01-7.01 sec 78.8 MBytes 658 Mbits/sec 0 1023 KBytes
[ 5] 7.01-8.01 sec 72.4 MBytes 611 Mbits/sec 0 1023 KBytes
[ 5] 8.01-9.01 sec 67.5 MBytes 562 Mbits/sec 0 1023 KBytes
[ 5] 9.01-10.01 sec 67.5 MBytes 572 Mbits/sec 0 1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 723 MBytes 606 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 723 MBytes 606 Mbits/sec receiver
Wavlink Quantum DAX (aka Phicomm K3)
OpenWrt 22.03.3, r20028-43d71ad93e
-----------------------------------------------------
root@OpenWrt:~# grep name /etc/board.json
"name": "Phicomm K3"
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 42666 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 171 MBytes 1.43 Gbits/sec 0 639 KBytes
[ 5] 1.00-2.00 sec 172 MBytes 1.45 Gbits/sec 0 639 KBytes
[ 5] 2.00-3.00 sec 172 MBytes 1.44 Gbits/sec 0 639 KBytes
[ 5] 3.00-4.01 sec 172 MBytes 1.44 Gbits/sec 0 639 KBytes
[ 5] 4.01-5.00 sec 171 MBytes 1.44 Gbits/sec 0 639 KBytes
[ 5] 5.00-6.00 sec 165 MBytes 1.38 Gbits/sec 0 1.06 MBytes
[ 5] 6.00-7.00 sec 172 MBytes 1.44 Gbits/sec 0 1.06 MBytes
[ 5] 7.00-8.00 sec 172 MBytes 1.45 Gbits/sec 0 1.06 MBytes
[ 5] 8.00-9.01 sec 174 MBytes 1.45 Gbits/sec 0 1.06 MBytes
[ 5] 9.01-10.01 sec 172 MBytes 1.45 Gbits/sec 0 1.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 1.68 GBytes 1.44 Gbits/sec 0 sender
[ 5] 0.00-10.01 sec 1.68 GBytes 1.44 Gbits/sec receiver
iperf Done.
Hostname
OpenWrt
Model
BESSTAR TECH LIMITED TH50
Architecture
11th Gen Intel(R) Core(TM) i5-11320H @ 3.20GHz
Target Platform
x86/64
Firmware Version
OpenWrt 22.03.3 r20028-43d71ad93e / LuCI openwrt-22.03 branch git-23.039.29681-007c243
Kernel Version
5.10.161
Local Time
2023-02-17 13:56:49
Uptime
0h 35m 43s
Load Average
0.06, 0.11, 0.04
A.K.A. Minisforum DeskMini TH50
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 33376 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 9.69 GBytes 83.2 Gbits/sec 0 1.31 MBytes
[ 5] 1.00-2.00 sec 10.1 GBytes 86.5 Gbits/sec 0 1.31 MBytes
[ 5] 2.00-3.00 sec 10.1 GBytes 86.5 Gbits/sec 0 1.44 MBytes
[ 5] 3.00-4.00 sec 10.1 GBytes 86.7 Gbits/sec 0 1.44 MBytes
[ 5] 4.00-5.00 sec 10.2 GBytes 87.4 Gbits/sec 0 1.44 MBytes
[ 5] 5.00-6.00 sec 10.0 GBytes 86.3 Gbits/sec 0 1.44 MBytes
[ 5] 6.00-7.00 sec 10.0 GBytes 86.2 Gbits/sec 0 1.44 MBytes
[ 5] 7.00-8.00 sec 10.0 GBytes 86.0 Gbits/sec 0 1.44 MBytes
[ 5] 8.00-9.00 sec 10.0 GBytes 86.2 Gbits/sec 0 1.44 MBytes
[ 5] 9.00-10.00 sec 10.0 GBytes 86.0 Gbits/sec 0 1.44 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 100 GBytes 86.1 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 100 GBytes 86.1 Gbits/sec receiver
Hi, you can add -1 in the server section of the command, to shut down the server after the client's test (else it remains running in background)
iperf3 -s -D -1 && iperf3 -c 127.0.0.1
3 Likes
sampson
February 19, 2023, 5:26am
207
$ neofetch
.',;::::;,'. fcc@fedora
.';:cccccccccccc:;,. ----------
.;cccccccccccccccccccccc;. OS: Fedora Linux 38 (Sway Prerelease) x86_64
.:cccccccccccccccccccccccccc:. Kernel: 6.2.0-0.rc8.57.fc38.x86_64
.;ccccccccccccc;.:dddl:.;ccccccc;. Uptime: 11 mins
.:ccccccccccccc;OWMKOOXMWd;ccccccc:. Packages: 1445 (rpm)
.:ccccccccccccc;KMMc;cc;xMMc:ccccccc:. Shell: bash 5.2.15
,cccccccccccccc;MMM.;cc;;WW::cccccccc, Resolution: 1920x1200
:cccccccccccccc;MMM.;cccccccccccccccc: Terminal: /dev/pts/1
:ccccccc;oxOOOo;MMM0OOk.;cccccccccccc: CPU: AMD A10-7850K Radeon R7 4C+8G (4) @ 3.700GHz
cccccc:0MMKxdd:;MMMkddc.;cccccccccccc; GPU: AMD ATI Radeon R7 Graphics
ccccc:XM0';cccc;MMM.;cccccccccccccccc' Memory: 931MiB / 14925MiB
ccccc;MMo;ccccc;MMW.;ccccccccccccccc;
ccccc;0MNc.ccc.xMMd:ccccccccccccccc;
cccccc;dNMWXXXWM0::cccccccccccccc:,
cccccccc;.:odl:.;cccccccccccccc:,.
:cccccccccccccccccccccccccccc:'.
.:cccccccccccccccccccccc:;,..
'::cccccccccccccc::;,.
$ iperf3 -s -D -1 && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 36946 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.88 GBytes 24.7 Gbits/sec 0 1023 KBytes
[ 5] 1.00-2.00 sec 3.11 GBytes 26.7 Gbits/sec 0 1023 KBytes
[ 5] 2.00-3.00 sec 3.13 GBytes 26.9 Gbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 3.19 GBytes 27.4 Gbits/sec 0 1.56 MBytes
[ 5] 4.00-5.00 sec 3.27 GBytes 28.1 Gbits/sec 0 1.56 MBytes
[ 5] 5.00-6.00 sec 3.22 GBytes 27.7 Gbits/sec 0 1.56 MBytes
[ 5] 6.00-7.00 sec 3.15 GBytes 27.1 Gbits/sec 0 1.56 MBytes
[ 5] 7.00-8.00 sec 2.67 GBytes 23.0 Gbits/sec 0 1.56 MBytes
[ 5] 8.00-9.00 sec 3.15 GBytes 27.0 Gbits/sec 0 1.56 MBytes
[ 5] 9.00-10.00 sec 3.26 GBytes 28.0 Gbits/sec 0 1.56 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 31.0 GBytes 26.7 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 31.0 GBytes 26.7 Gbits/sec receiver
iperf Done.
oli
February 22, 2023, 6:11am
208
Hostname
OpenWrt
Model
Linksys WRT1900ACS
Architecture
ARMv7 Processor rev 1 (v7l)
Target Platform
mvebu/cortexa9
Firmware Version
OpenWrt SNAPSHOT r22124-bfa5e4e4eb / LuCI Master git-23.039.28596-41e9b8d
Kernel Version
5.15.94
BusyBox v1.36.0 (2023-02-19 12:04:59 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r22124-bfa5e4e4eb
-----------------------------------------------------
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 44296 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 476 MBytes 3.99 Gbits/sec 0 4.43 MBytes
[ 5] 1.00-2.00 sec 474 MBytes 3.97 Gbits/sec 0 4.43 MBytes
[ 5] 2.00-3.00 sec 472 MBytes 3.97 Gbits/sec 0 4.43 MBytes
[ 5] 3.00-4.00 sec 474 MBytes 3.97 Gbits/sec 0 4.43 MBytes
[ 5] 4.00-5.00 sec 475 MBytes 3.98 Gbits/sec 0 4.43 MBytes
[ 5] 5.00-6.00 sec 474 MBytes 3.97 Gbits/sec 0 4.43 MBytes
[ 5] 6.00-7.00 sec 475 MBytes 3.98 Gbits/sec 0 4.43 MBytes
[ 5] 7.00-8.00 sec 474 MBytes 3.98 Gbits/sec 0 4.43 MBytes
[ 5] 8.00-9.00 sec 475 MBytes 3.99 Gbits/sec 0 4.43 MBytes
[ 5] 9.00-10.00 sec 474 MBytes 3.98 Gbits/sec 0 4.43 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.63 GBytes 3.98 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 4.63 GBytes 3.97 Gbits/sec receiver
iperf Done.
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 60784 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 869 MBytes 7.28 Gbits/sec 0 1023 KBytes
[ 5] 1.00-2.00 sec 484 MBytes 4.06 Gbits/sec 0 1023 KBytes
[ 5] 2.00-3.00 sec 485 MBytes 4.07 Gbits/sec 0 1023 KBytes
[ 5] 3.00-4.00 sec 486 MBytes 4.08 Gbits/sec 0 1023 KBytes
[ 5] 4.00-5.00 sec 488 MBytes 4.09 Gbits/sec 0 1023 KBytes
[ 5] 5.00-6.00 sec 488 MBytes 4.09 Gbits/sec 0 1023 KBytes
[ 5] 6.00-7.00 sec 489 MBytes 4.10 Gbits/sec 0 1023 KBytes
[ 5] 7.00-8.00 sec 486 MBytes 4.08 Gbits/sec 0 1023 KBytes
[ 5] 8.00-9.00 sec 488 MBytes 4.09 Gbits/sec 0 1023 KBytes
[ 5] 9.00-10.00 sec 1.02 GBytes 8.80 Gbits/sec 0 1.12 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 5.67 GBytes 4.87 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 5.67 GBytes 4.87 Gbits/sec receiver
iperf Done.
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 55372 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 488 MBytes 4.09 Gbits/sec 0 4.37 MBytes
[ 5] 1.00-2.00 sec 481 MBytes 4.03 Gbits/sec 0 4.37 MBytes
[ 5] 2.00-3.00 sec 486 MBytes 4.08 Gbits/sec 0 4.37 MBytes
[ 5] 3.00-4.00 sec 488 MBytes 4.09 Gbits/sec 0 4.37 MBytes
[ 5] 4.00-5.00 sec 488 MBytes 4.09 Gbits/sec 0 4.37 MBytes
[ 5] 5.00-6.00 sec 489 MBytes 4.10 Gbits/sec 0 4.37 MBytes
[ 5] 6.00-7.00 sec 489 MBytes 4.10 Gbits/sec 0 4.37 MBytes
[ 5] 7.00-8.00 sec 488 MBytes 4.09 Gbits/sec 0 4.37 MBytes
[ 5] 8.00-9.00 sec 489 MBytes 4.10 Gbits/sec 0 4.37 MBytes
[ 5] 9.00-10.00 sec 490 MBytes 4.11 Gbits/sec 0 4.37 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.76 GBytes 4.09 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 4.75 GBytes 4.08 Gbits/sec receiver
iperf Done.
root@OpenWrt:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 58824 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.13 GBytes 9.71 Gbits/sec 0 2.06 MBytes
[ 5] 1.00-2.00 sec 486 MBytes 4.08 Gbits/sec 0 2.06 MBytes
[ 5] 2.00-3.00 sec 489 MBytes 4.10 Gbits/sec 0 2.06 MBytes
[ 5] 3.00-4.00 sec 488 MBytes 4.09 Gbits/sec 0 2.06 MBytes
[ 5] 4.00-5.00 sec 490 MBytes 4.11 Gbits/sec 0 2.06 MBytes
[ 5] 5.00-6.00 sec 491 MBytes 4.13 Gbits/sec 0 2.06 MBytes
[ 5] 6.00-7.00 sec 490 MBytes 4.11 Gbits/sec 0 2.06 MBytes
[ 5] 7.00-8.00 sec 491 MBytes 4.12 Gbits/sec 0 2.06 MBytes
[ 5] 8.00-9.00 sec 484 MBytes 4.05 Gbits/sec 0 2.06 MBytes
[ 5] 9.00-10.00 sec 739 MBytes 6.20 Gbits/sec 0 2.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 5.67 GBytes 4.87 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 5.66 GBytes 4.86 Gbits/sec receiver
iperf Done.
root@OpenWrt:~#
NETGEAR WAX206
BusyBox v1.36.0 (2023-02-19 18:44:39 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r22117-7ae4716243
-----------------------------------------------------
root@OpenWrt:~# iperf3 -s -D -1 && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 36842 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 661 MBytes 5.54 Gbits/sec 0 1.19 MBytes
[ 5] 1.00-2.00 sec 656 MBytes 5.50 Gbits/sec 0 1.19 MBytes
[ 5] 2.00-3.00 sec 622 MBytes 5.22 Gbits/sec 0 1.56 MBytes
[ 5] 3.00-4.00 sec 646 MBytes 5.43 Gbits/sec 0 1.56 MBytes
[ 5] 4.00-5.00 sec 641 MBytes 5.38 Gbits/sec 0 1.56 MBytes
[ 5] 5.00-6.00 sec 649 MBytes 5.44 Gbits/sec 0 1.56 MBytes
[ 5] 6.00-7.00 sec 646 MBytes 5.42 Gbits/sec 0 1.56 MBytes
[ 5] 7.00-8.00 sec 642 MBytes 5.40 Gbits/sec 0 1.56 MBytes
[ 5] 8.00-9.00 sec 652 MBytes 5.47 Gbits/sec 0 1.56 MBytes
[ 5] 9.00-10.00 sec 650 MBytes 5.46 Gbits/sec 0 1.56 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 6.32 GBytes 5.43 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 6.31 GBytes 5.42 Gbits/sec receiver
iperf Done.
WiFire S1500.NBN
BusyBox v1.36.0 (2023-02-21 15:33:46 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r22130-2ade7e3dd4
-----------------------------------------------------
root@S1500NBN:~# iperf3 -s -D -1 && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 59694 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 83.8 MBytes 702 Mbits/sec 0 831 KBytes
[ 5] 1.00-2.00 sec 92.4 MBytes 773 Mbits/sec 0 1.31 MBytes
[ 5] 2.00-3.01 sec 94.9 MBytes 792 Mbits/sec 0 1.31 MBytes
[ 5] 3.01-4.02 sec 87.9 MBytes 732 Mbits/sec 0 1.31 MBytes
[ 5] 4.02-5.01 sec 78.8 MBytes 665 Mbits/sec 0 1.31 MBytes
[ 5] 5.01-6.01 sec 80.6 MBytes 676 Mbits/sec 0 1.31 MBytes
[ 5] 6.01-7.01 sec 95.0 MBytes 797 Mbits/sec 0 1.31 MBytes
[ 5] 7.01-8.01 sec 93.2 MBytes 781 Mbits/sec 0 1.31 MBytes
[ 5] 8.01-9.00 sec 86.2 MBytes 730 Mbits/sec 0 1.31 MBytes
[ 5] 9.00-10.00 sec 95.0 MBytes 796 Mbits/sec 0 1.31 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 888 MBytes 744 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 887 MBytes 744 Mbits/sec receiver
iperf Done.
root@S1500NBN:~#
AVM FRITZ!BOX 4040
root@R4040:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 39304 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 171 MBytes 1.43 Gbits/sec 0 1.19 MBytes
[ 5] 1.00-2.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 2.00-3.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 3.00-4.00 sec 180 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 4.00-5.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 5.00-6.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 6.00-7.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 7.00-8.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 8.00-9.01 sec 180 MBytes 1.50 Gbits/sec 0 1.19 MBytes
[ 5] 9.01-10.00 sec 179 MBytes 1.50 Gbits/sec 0 1.19 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.74 GBytes 1.49 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 1.74 GBytes 1.49 Gbits/sec receiver
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r22246-9d8374cadc
-----------------------------------------------------
root@OpenWrt:~# iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 46480 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 5.77 GBytes 49.6 Gbits/sec 0 895 KBytes
[ 5] 1.00-2.00 sec 5.85 GBytes 50.2 Gbits/sec 0 895 KBytes
[ 5] 2.00-3.00 sec 5.84 GBytes 50.2 Gbits/sec 0 895 KBytes
[ 5] 3.00-4.00 sec 5.81 GBytes 49.9 Gbits/sec 0 895 KBytes
[ 5] 4.00-5.00 sec 5.75 GBytes 49.4 Gbits/sec 0 1.12 MBytes
[ 5] 5.00-6.00 sec 5.67 GBytes 48.7 Gbits/sec 0 895 KBytes
[ 5] 6.00-7.00 sec 5.73 GBytes 49.2 Gbits/sec 0 1023 KBytes
[ 5] 7.00-8.00 sec 5.68 GBytes 48.8 Gbits/sec 0 1023 KBytes
[ 5] 8.00-9.00 sec 5.78 GBytes 49.7 Gbits/sec 0 895 KBytes
[ 5] 9.00-10.00 sec 5.72 GBytes 49.1 Gbits/sec 0 1023 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 57.6 GBytes 49.5 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 57.6 GBytes 49.5 Gbits/sec receiver
iperf Done.
GL-iNet Flint AX1800
Linux OpenWrt 5.15.86 #0 SMP Sun Mar 19 09:43:22 2023 aarch64 GNU/Linux
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 54148 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 651 MBytes 5.46 Gbits/sec 0 767 KBytes
[ 5] 1.00-2.00 sec 652 MBytes 5.47 Gbits/sec 0 895 KBytes
[ 5] 2.00-3.00 sec 660 MBytes 5.53 Gbits/sec 0 895 KBytes
[ 5] 3.00-4.00 sec 661 MBytes 5.55 Gbits/sec 0 895 KBytes
[ 5] 4.00-5.00 sec 648 MBytes 5.43 Gbits/sec 0 895 KBytes
[ 5] 5.00-6.00 sec 651 MBytes 5.47 Gbits/sec 0 895 KBytes
[ 5] 6.00-7.00 sec 661 MBytes 5.54 Gbits/sec 0 895 KBytes
[ 5] 7.00-8.00 sec 658 MBytes 5.52 Gbits/sec 0 895 KBytes
[ 5] 8.00-9.00 sec 669 MBytes 5.61 Gbits/sec 0 895 KBytes
[ 5] 9.00-10.00 sec 650 MBytes 5.45 Gbits/sec 1 895 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 6.41 GBytes 5.50 Gbits/sec 1 sender
[ 5] 0.00-10.00 sec 6.40 GBytes 5.50 Gbits/sec receiver
2 Likes
onix
March 20, 2023, 11:53pm
214
TP-Link Archer C7 v5
Linux ArcherC7v5 5.10.161 #0 Tue Jan 3 00:24:21 2023 mips GNU/Linux
root@ArcherC7v5:~# iperf3 -s -D && iperf3 -c 127.0.0.1 port 5201
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 34064 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 50.4 MBytes 416 Mbits/sec 0 1.06 MBytes
[ 5] 1.01-2.00 sec 49.2 MBytes 418 Mbits/sec 0 1.06 MBytes
[ 5] 2.00-3.00 sec 51.2 MBytes 430 Mbits/sec 0 1.06 MBytes
[ 5] 3.00-4.00 sec 49.9 MBytes 418 Mbits/sec 0 1.06 MBytes
[ 5] 4.00-5.00 sec 50.6 MBytes 425 Mbits/sec 0 1.06 MBytes
[ 5] 5.00-6.00 sec 53.4 MBytes 448 Mbits/sec 0 1.06 MBytes
[ 5] 6.00-7.00 sec 51.6 MBytes 433 Mbits/sec 0 1.06 MBytes
[ 5] 7.00-8.00 sec 53.5 MBytes 449 Mbits/sec 0 1.06 MBytes
[ 5] 8.00-9.00 sec 51.6 MBytes 433 Mbits/sec 0 1.06 MBytes
[ 5] 9.00-10.00 sec 52.6 MBytes 440 Mbits/sec 0 1.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 514 MBytes 431 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 513 MBytes 430 Mbits/sec receiver
iperf Done.
root@ArcherC7v5:~#
Dynalink DL-WRX36
iperf3 -s -D && iperf3 -c 127.0.0.1 port 5201
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 56642 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 830 MBytes 6.96 Gbits/sec 0 1.69 MBytes
[ 5] 1.00-2.00 sec 815 MBytes 6.84 Gbits/sec 0 1.69 MBytes
[ 5] 2.00-3.00 sec 818 MBytes 6.86 Gbits/sec 0 1.69 MBytes
[ 5] 3.00-4.00 sec 816 MBytes 6.85 Gbits/sec 0 1.69 MBytes
[ 5] 4.00-5.00 sec 818 MBytes 6.86 Gbits/sec 0 1.69 MBytes
[ 5] 5.00-6.00 sec 816 MBytes 6.85 Gbits/sec 0 1.69 MBytes
[ 5] 6.00-7.00 sec 812 MBytes 6.81 Gbits/sec 0 1.69 MBytes
[ 5] 7.00-8.00 sec 812 MBytes 6.81 Gbits/sec 0 1.69 MBytes
[ 5] 8.00-9.00 sec 811 MBytes 6.80 Gbits/sec 0 1.69 MBytes
[ 5] 9.00-10.00 sec 810 MBytes 6.80 Gbits/sec 0 1.69 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 7.97 GBytes 6.84 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 7.96 GBytes 6.84 Gbits/sec receiver
tp-link Archer C2600 v1.1APCCV (NSS) release
root@APCCV:~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 45992 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 407 MBytes 3.41 Gbits/sec 0 1.25 MBytes
[ 5] 1.00-2.00 sec 404 MBytes 3.39 Gbits/sec 0 1.25 MBytes
[ 5] 2.00-3.00 sec 412 MBytes 3.46 Gbits/sec 0 1.25 MBytes
[ 5] 3.00-4.00 sec 412 MBytes 3.46 Gbits/sec 0 1.25 MBytes
[ 5] 4.00-5.00 sec 405 MBytes 3.39 Gbits/sec 0 1.25 MBytes
[ 5] 5.00-6.00 sec 416 MBytes 3.50 Gbits/sec 0 1.25 MBytes
[ 5] 6.00-7.00 sec 410 MBytes 3.44 Gbits/sec 0 1.25 MBytes
[ 5] 7.00-8.00 sec 405 MBytes 3.40 Gbits/sec 0 1.25 MBytes
[ 5] 8.00-9.00 sec 412 MBytes 3.46 Gbits/sec 0 1.25 MBytes
[ 5] 9.00-10.00 sec 412 MBytes 3.46 Gbits/sec 0 1.25 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.00 GBytes 3.44 Gbits/sec 0 sender
[ 5] 0.00-10.00 sec 4.00 GBytes 3.43 Gbits/sec receiver
iperf Done.
1 Like
GL-MT300N-V2
~# iperf3 -s -D && iperf3 -c 127.0.0.1
Connecting to host 127.0.0.1, port 5201
[ 5] local 127.0.0.1 port 41944 connected to 127.0.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.01 sec 45.4 MBytes 377 Mbits/sec 0 1.06 MBytes
[ 5] 1.01-2.01 sec 44.1 MBytes 370 Mbits/sec 0 1.06 MBytes
[ 5] 2.01-3.01 sec 45.0 MBytes 377 Mbits/sec 0 1.06 MBytes
[ 5] 3.01-4.02 sec 45.4 MBytes 379 Mbits/sec 0 1.06 MBytes
[ 5] 4.02-5.00 sec 44.1 MBytes 375 Mbits/sec 0 1.06 MBytes
[ 5] 5.00-6.02 sec 45.6 MBytes 377 Mbits/sec 0 1.06 MBytes
[ 5] 6.02-7.02 sec 44.2 MBytes 372 Mbits/sec 0 1.06 MBytes
[ 5] 7.02-8.03 sec 44.8 MBytes 372 Mbits/sec 0 1.06 MBytes
[ 5] 8.03-9.02 sec 44.5 MBytes 376 Mbits/sec 0 1.06 MBytes
[ 5] 9.02-10.00 sec 43.2 MBytes 370 Mbits/sec 0 1.06 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 446 MBytes 374 Mbits/sec 0 sender
[ 5] 0.00-10.01 sec 446 MBytes 374 Mbits/sec receiver
iperf Done.
