Please help me to separate vpn and wan traffic via two different ethernet ports

[vgaetera]

@bulat

my Wireguard vpn interface is still down

Check this thread:

Wireguard interface not working properly after reboot

I have wireguard successfully setup and working on my device in a "full vpn" style mode (allowed ips 0.0.0.0/0, and route allowed ips checked). Everything works until a reboot (which unfortunately happens often with power outages in my area). After reboot, the wg interface is up yet the RX always shows 0 bytes. I can ping the wg endpoint directly, so the internet is working. I've also tried restarting the network (via /etc/init.d/network) and bringing the wg iface down/up with luci and ip. No …