Close. Thanks all !!!!
How this is related with OpenWRT from openwrt.org?
ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:56
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::211:22ff:fe33:4456/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:166 errors:0 dropped:0 overruns:0 frame:0
TX packets:106 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:33039 (32.2 KiB) TX bytes:17582 (17.1 KiB)
Interrupt:85
eth1 Link encap:Ethernet HWaddr 00:11:22:33:44:55
inet addr:192.168.9.4 Bcast:192.168.9.255 Mask:255.255.255.0
inet6 addr: 2405:4802:a243:3570:211:22ff:fe33:4455/128 Scope:Global
inet6 addr: fe80::211:22ff:fe33:4455/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:128 errors:0 dropped:0 overruns:0 frame:0
TX packets:148 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19887 (19.4 KiB) TX bytes:28707 (28.0 KiB)
Interrupt:86
ifb-dhcp Link encap:Ethernet HWaddr 8A:82:17:D0:2A:69
inet6 addr: fe80::8882:17ff:fed0:2a69/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ifb-dhcprelay Link encap:Ethernet HWaddr 16:D7:BD:76:4A:59
inet6 addr: fe80::14d7:bdff:fe76:4a59/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ifb-dns Link encap:Ethernet HWaddr FA:5A:E8:D9:72:11
inet6 addr: fe80::f85a:e8ff:fed9:7211/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4070 (3.9 KiB) TX bytes:4070 (3.9 KiB)
spotfilter-ifb Link encap:Ethernet HWaddr CE:91:78:82:42:5E
inet6 addr: fe80::cc91:78ff:fe82:425e/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 02:00:00:02:03:00
inet6 addr: fe80::ff:fe02:300/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:4096
RX bytes:0 (0.0 B) TX bytes:872 (872.0 B)
wlan1 Link encap:Ethernet HWaddr 00:03:04:00:00:04
inet6 addr: fe80::203:4ff:fe00:4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:4096
RX bytes:0 (0.0 B) TX bytes:872 (872.0 B)
Wrong door, Sherlock. This is not QSDK moral support point. Your soc is not supported by mainline kernel nor here.
I built it based on both OpenWrt and QSDK, but the same error occurs.
As the ipq50xx isn’t supported by openwrt how did you build it?
Share your GitHub repo and details of your porting efforts please
1 Like
ipq50xx is available for openwrt and hopefully it will be official soon. There are several boards already running openwrt, and more are being added.
That does not override qsdk being from somewhere else
never said it did ... i was referring to these post