Hi there, I am trying to install OpenWRT on a Pirelli PRG AV4202N:
https://openwrt.org/toh/adb/p.dg_av4202n
Flashing via Webinterface did not work, so I am trying via TTL 2 serial cable. Managed to get communication via ttl2serial, but when I type in "help" I get only some of the commands, not including commands like flash, erase...
Anyone has an idea on how to unlock this beast? Command "unlock" does not work. Nothing happens.
Here is my logfile:
CFE version 1.0.38-112.37-S for BCM96368 (32bit,SP,BE)
Build Date: Tue Mar 31 16:12:10 CEST 2015 (f.crudo@quelo) v1
Copyright (C) 2000-2011 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201 size 16384KB
Total Flash size: 16384K with 128 sectors
Enabling RGMII ID mode
Chip ID: BCM6368B2, MIPS: 400MHz
Main Thread: TP0
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000
loading main image ...
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-15) : 96368SV2
Number of MAC Addresses (1-32) : 16
Base MAC Address : 02:10:18:01:00:01
PSI Size (1-64) KBytes : 24
Enable Backup PSI [0|1] : 0
System Log Size (0-256) KBytes : 0
Main Thread Number [0|1] : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 111
CFE>
web info: Waiting for connection on socket 0.e[J
CFE>
CFE>
CFE> help
Available commands:
unlock Unlock flash sectors
r Run program from flash image or from host depend on [f/h] flag
p Print boot line and board parameter info
c Change booline parameters
a Change board AFE ID
b Change board parameters
reset Reset the board
help Obtain help for CFE commands
For more information about a command, enter 'help command-name'
*** command status = 0
CFE> e
Invalid command: "e"
Available commands: unlock, r, p, c, a, b, reset, help
*** command status = -1
CFE> m
Invalid command: "m"
Available commands: unlock, r, p, c, a, b, reset, help
*** command status = -1
CFE> f
Invalid command: "f"
Available commands: unlock, r, p, c, a, b, reset, help
*** command status = -1
CFE> unlock
*** command status = 0
CFE> f
Invalid command: "f"
Available commands: unlock, r, p, c, a, b, reset, help