PFsense and 3200acm OpenWrt Set up

Saludos Everyone

I have been trying to set up the following configuration, Modem to PFsense Router (that is responsible for DHCP, DNS, Vlans and firewall) and the 3200acm with Openwrt as a dumb ap to be able to segment the ports on different vlans for security and have not found a way to properly configure it to communicate and assign IP's for each Vlan.

On the Openwrt 3200acm router I have disabled the firewall, dnsmasq and odhcpd, deleted the wan and wan6 and only left the lan that is set up on Openwrt installation.

Can anyone provide me with a detailed on how to set this up, after all the configuration I do not get any internet on the ports I want separated.

Thanks in advance for any guidance.

1 Like

Please copy the output of the following commands and post it here using the "Preformatted text </> " button:
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall