OWUT Couldn't download image

[IanBlakeley]

I know it has been busy so waited, updated my backup router okay different architecture (Archer C3) but while the image seems to build it will not download.

root@Blakeley-Router:/etc/ssl/certs# owut upgrade --version-to 25.12.2
ASU-Server     https://sysupgrade.openwrt.org
Upstream       https://downloads.openwrt.org
Target         ramips/mt7621
Profile        tplink_archer-ax23-v1
Package-arch   mipsel_24kc
Version-from   24.10.3 r28872-daca7c049b (kernel 6.6.104)
Version-to     25.12.2 r32802-f505120278 (kernel 6.12.74)
168 packages are out-of-date
There are 0 missing and 1 modified default packages
Request hash:
f7d28581e50ccdb1258605ea3b01752beaab298b3906bcfc5a1fbe4683589d4f

Status:   done
Progress:   0s total =   0s in queue +   0s in build

Build succeeded in   0s total =   0s in queue +   0s to build:
ERROR: Couldn't download image openwrt-25.12.2-443c4c1cc543-ramips-mt7621-tplink_archer-ax23-v1-squashfs-sysupgrade.bin

Seems to be enough space on the device

root@Blakeley-Router:/etc/ssl/certs# df -hT
Filesystem           Type            Size      Used Available Use% Mounted on
/dev/root            squashfs        6.8M      6.8M         0 100% /rom
tmpfs                tmpfs          58.2M      2.3M     55.9M   4% /tmp
/dev/mtdblock4       jffs2           5.8M      2.6M      3.2M  45% /overlay
overlayfs:/overlay   overlay         5.8M      2.6M      3.2M  45% /
tmpfs                tmpfs         512.0K      4.0K    508.0K   1% /dev

If I try with luci then it seems to be hung on downloading firmware.

Just wait another few days or do I have an issue here?

TY

[lusu]

Better check the thread here:
LuCI Attended Sysupgrade support thread - Community Builds, Projects & Packages - OpenWrt Forum

There seems to be an issue with the download of firmware, check there for a solution when posted.

[wolfgangrupprecht]

I had that happen for a Netgear WNDR3700 v4 25.12.2 image. I found that the image did exist on the download server and I could downloaded to my desktop with wget and then flash it from luci on the “flash new firmware image” pulldown. In my case the failure msg did show the full https://… url with no guesswork needed.

[IanBlakeley]

Thanks. I’ll wait a bit then, fooled myself when the spare router updated okay since it was from a slightly newer version of 24 I did try after upgrading first to the latest 24.10.6 but that fails in the same way too.

[IanBlakeley]

I went and searched for the image, found it and did a manual install. Back up and working. I probably need to find my scripts from an old backup and restore those that are needed but I can plod through that. I’ll close this now.