I have a configuration of 5 Openwrt Routers (4 Archer C7 v2, 1 Ubiquity), all setup as a dumb AP using the LAN ports to connect ot the network. 3 of these dumb APs have an additional Guest interface/network (br-guest) that uses a VLAN to connect to the Fritzbox. In normal operation everything works …

The firewall option didn't work. I changed the prioritisation of the network by changing the gateway metric on both interfaces: main value 1, guest value 10. The lower metric is the preferred network. This solved the issue! Thanks for the help! Traceroute put me on the right track.

What is the error code reported ? view: [image] Cannot update OpenWrt - wget error 5 Installing and Using OpenWrt So tried the other night to update 2 OpenWRT devices. Both returning wget error 5. Any ideas? Thanks Collected errors: * opkg_download: Failed to download…

Failed to send request: Operation not permitted *** Failed to download the package list from https://downloads.openwrt.org/releases/23.05.2/targets/ath79/generic/packages/Packages.gz

[image] Hawantie: Failed to send request: Operation not permitted Because it reports Failed to send request I think the command doesn´t know which interface to use for sending the request or it uses the wrong interface.

connect to router/device ssh and test: traceroute -n downloads.openwrt.org

opkg_download: Failed to download https://downloads.openwrt.org/releases/23.05.2/packages/mips_24kc/telephony/Packages.gz, wget returned 4.

[image] Hawantie: wget returned 4 [image] Wget returned 4 Installing and Using OpenWrt also check date/time on router. It may have failed an NTP update and SSL will not work with incorrect date/time.

Strange, traceroute shows that my guest network is used for connecting downloads.openwrt.org . Should be my main network.... I use a log in page for the guest network. I disabled it and OPKG Update works! However, I would like to use my main network (untagged), and not the guest network (VLAN 5)

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button: [grafik] Remember to redact passwords, MAC addresses and any public IP addresses you may have: ubus call system board cat /etc/config/network c…

Iĺl do later.; I disabled the firewall, and dhcp....

I think there are 2 ways to avoid this; 1. prioritization of my main network in the device IP config, or 2. use the firewall to prevent traffic from the device to the guest VLAN.

OPKG Update & WGET Fail Guest VLAN (wget returned 4)

Installing and Using OpenWrt

ncompact November 17, 2023, 8:39am 7