It's from Remittor's build that includes the patches for the Winbond chip on the device. Using the 23.05.04 image soft bricked my device and was what lead me to create an account in this forum in the first place.
Unfortunately I do not have uart available to me.
Here is the output for dmesg:
0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.162 (user@debian) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24012-d8dd03c46f) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Mon Jul 15 22:14:18 2024
[ 0.000000] Machine model: Xiaomi Mi Router AX3000T
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000004fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
[ 0.000000] node 0: [mem 0x0000000043030000-0x0000000047c7ffff]
[ 0.000000] node 0: [mem 0x0000000047c80000-0x0000000047ffffff]
[ 0.000000] node 0: [mem 0x0000000048000000-0x000000004fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s33112 r8192 d32424 u73728
[ 0.000000] pcpu-alloc: s33112 r8192 d32424 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512
[ 0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 swiotlb=512 rootfstype=squashfs firmware=0 mtd=ubi uart_en=1
[ 0.000000] Unknown kernel command line parameters "firmware=0 mtd=ubi uart_en=1", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 241372K/262144K available (8384K kernel code, 906K rwdata, 1488K rodata, 448K init, 300K bss, 20772K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] Root IRQ handler: 0xffffffc008010090
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000001] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000154] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.000165] pid_max: default: 32768 minimum: 301
[ 0.000448] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.000458] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.001831] rcu: Hierarchical SRCU implementation.
[ 0.002233] smp: Bringing up secondary CPUs ...
[ 0.002572] Detected VIPT I-cache on CPU1
[ 0.002600] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.002632] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.002702] smp: Brought up 1 node, 2 CPUs
[ 0.002716] SMP: Total of 2 processors activated.
[ 0.002721] CPU features: detected: 32-bit EL0 Support
[ 0.002725] CPU features: detected: CRC32 instructions
[ 0.002754] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.002821] CPU: All CPU(s) started at EL2
[ 0.002832] alternatives: patching kernel code
[ 0.006464] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.006489] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.006639] pinctrl core: initialized pinctrl subsystem
[ 0.007530] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.007910] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.007941] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.007966] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.008326] thermal_sys: Registered thermal governor 'fair_share'
[ 0.008331] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.008335] thermal_sys: Registered thermal governor 'step_wise'
[ 0.008340] thermal_sys: Registered thermal governor 'user_space'
[ 0.008577] ASID allocator initialised with 65536 entries
[ 0.009060] pstore: Registered ramoops as persistent store backend
[ 0.009067] ramoops: using 0x10000@0x42ff0000, ecc: 0
[ 0.019706] cryptd: max_cpu_qlen set to 1000
[ 0.022057] SCSI subsystem initialized
[ 0.022226] libata version 3.00 loaded.
[ 0.023478] clocksource: Switched to clocksource arch_sys_counter
[ 0.024128] NET: Registered PF_INET protocol family
[ 0.024223] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.024645] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.024663] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.024672] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.024690] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.024721] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.024797] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.024814] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.024943] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.024973] PCI: CLS 0 bytes, default 64
[ 0.027669] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[ 0.031421] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.031438] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.066131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.066967] pwm-mediatek 10048000.pwm: clock: top fail: -517
[ 0.077550] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.079969] printk: console [ttyS0] disabled
[ 0.100166] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 18, base_baud = 2500000) is a ST16650V2
[ 0.739519] printk: console [ttyS0] enabled
[ 0.744589] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.754590] loop: module loaded
[ 0.757736] Loading iSCSI transport class v2.0-870.
[ 0.764784] spi spi0.0: setup: ignoring unsupported mode bits a00
[ 0.771243] spi-nand spi0.0: Winbond SPI NAND was found.
[ 0.776594] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 96
[ 0.785348] Signature found at block 1023 [0x07fe0000]
[ 0.790479] NMBM configuration mismatch
[ 0.794621] 10 fixed-partitions partitions found on MTD device spi0.0
[ 0.801062] Creating 10 MTD partitions on "spi0.0":
[ 0.805941] 0x000000000000-0x000000100000 : "BL2"
[ 0.811688] 0x000000100000-0x000000140000 : "Nvram"
[ 0.817216] 0x000000140000-0x000000180000 : "Bdata"
[ 0.822744] 0x000000180000-0x000000380000 : "Factory"
[ 0.829810] 0x000000380000-0x000000580000 : "FIP"
[ 0.836213] 0x000000580000-0x0000005c0000 : "crash"
[ 0.841768] 0x0000005c0000-0x000000600000 : "crash_log"
[ 0.847665] 0x000007600000-0x000007640000 : "KF"
[ 0.852945] 0x000000600000-0x000002800000 : "ubi_kernel"
[ 0.876375] 0x000002800000-0x000007600000 : "ubi"
[ 1.070500] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc009580000, irq 83
[ 1.080173] i2c_dev: i2c /dev entries driver
[ 1.086648] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 1.095507] NET: Registered PF_INET6 protocol family
[ 1.101391] Segment Routing with IPv6
[ 1.105103] In-situ OAM (IOAM) with IPv6
[ 1.109058] NET: Registered PF_PACKET protocol family
[ 1.114153] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.127440] 8021q: 802.1Q VLAN Support v1.8
[ 1.132865] pstore: Using crash dump compression: deflate
[ 2.153406] mt7530-mdio mdio-bus:1f: reset timeout
[ 2.158265] mt7530-mdio: probe of mdio-bus:1f failed with error -110
[ 2.165308] UBI: auto-attach mtd9
[ 2.168633] ubi0: default fastmap pool size: 30
[ 2.173152] ubi0: default fastmap WL pool size: 15
[ 2.177942] ubi0: attaching mtd9
[ 2.687760] ubi0: scanning is finished
[ 2.701407] ubi0: attached mtd9 (name "ubi", size 78 MiB)
[ 2.706827] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.713696] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.720470] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.727424] ubi0: good PEBs: 624, bad PEBs: 0, corrupted PEBs: 0
[ 2.733416] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.740627] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1578296586
[ 2.749746] ubi0: available PEBs: 0, total reserved PEBs: 624, PEBs reserved for bad PEB handling: 20
[ 2.758963] ubi0: background thread "ubi_bgt0d" started, PID 433
[ 2.767012] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.772505] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 2.779739] clk: Disabling unused clocks
[ 2.789642] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.797026] Freeing unused kernel memory: 448K
[ 2.801519] Run /sbin/init as init process
[ 2.805610] with arguments:
[ 2.808564] /sbin/init
[ 2.811258] with environment:
[ 2.814390] HOME=/
[ 2.816737] TERM=linux
[ 2.819431] firmware=0
[ 2.822125] mtd=ubi
[ 2.824561] uart_en=1
[ 3.054666] init: Console is alive
[ 3.058218] init: - watchdog -
[ 3.926713] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.985660] usbcore: registered new interface driver usbfs
[ 3.991187] usbcore: registered new interface driver hub
[ 3.996567] usbcore: registered new device driver usb
[ 4.009699] usbcore: registered new interface driver usb-storage
[ 4.016275] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.029112] init: - preinit -
[ 4.435340] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 4.443840] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 4.452463] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.469827] random: procd: uninitialized urandom read (4 bytes read)
[ 6.529084] mount_root: loading kmods from internal overlay
[ 6.545633] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 6.553696] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 6.721173] UBIFS (ubi0:1): default file-system created
[ 6.727232] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 6.732976] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 563
[ 6.812426] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.820298] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.830205] UBIFS (ubi0:1): FS size: 56885248 bytes (54 MiB, 448 LEBs), max 458 LEBs, journal size 2793472 bytes (2 MiB, 22 LEBs)
[ 6.841845] UBIFS (ubi0:1): reserved for root: 2686830 bytes (2623 KiB)
[ 6.848449] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 3890EF3E-211D-4E7D-9D4D-23BBC09CB8C3, small LPT model
[ 6.860816] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 6.867923] block: unable to load configuration (fstab: Entry not found)
[ 6.874676] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 6.881161] block: unable to load configuration (fstab: Entry not found)
[ 6.887898] block: attempting to load /etc/config/fstab
[ 6.901122] block: unable to load configuration (fstab: Entry not found)
[ 6.907940] block: no usable configuration
[ 6.915834] UBIFS (ubi0:1): un-mount UBI device 0
[ 6.920549] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 6.930380] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 6.936154] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 566
[ 7.015255] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 7.023088] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.033019] UBIFS (ubi0:1): FS size: 56885248 bytes (54 MiB, 448 LEBs), max 458 LEBs, journal size 2793472 bytes (2 MiB, 22 LEBs)
[ 7.044660] UBIFS (ubi0:1): reserved for root: 2686830 bytes (2623 KiB)
[ 7.051260] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 3890EF3E-211D-4E7D-9D4D-23BBC09CB8C3, small LPT model
[ 7.103490] random: crng init done
[ 7.119058] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 7.126166] block: unable to load configuration (fstab: Entry not found)
[ 7.132894] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 7.139403] block: unable to load configuration (fstab: Entry not found)
[ 7.146142] block: attempting to load /etc/config/fstab
[ 7.151406] block: unable to load configuration (fstab: Entry not found)
[ 7.158134] block: no usable configuration
[ 7.163663] mount_root: overlay filesystem has not been fully initialized yet
[ 7.171060] mount_root: switching to ubifs overlay
[ 7.186752] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 7.198043] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 7.225208] procd: - early -
[ 7.228172] procd: - watchdog -
[ 7.784921] procd: - watchdog -
[ 7.822158] procd: - ubus -
[ 7.988834] procd: - init -
[ 8.398986] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.415378] NET: Registered PF_ALG protocol family
[ 8.430347] Key type dns_resolver registered
[ 8.443406] Key type cifs.idmap registered
[ 8.452645] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 8.459913] tun: Universal TUN/TAP device driver, 1.6
[ 8.474606] l2tp_core: L2TP core driver, V2.0
[ 8.479997] l2tp_netlink: L2TP netlink interface
[ 8.485966] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 8.494696] gre: GRE over IPv4 demultiplexor driver
[ 8.502456] ip_gre: GRE over IPv4 tunneling driver
[ 8.511389] ip6_gre: GRE over IPv6 tunneling driver
[ 8.520280] GACT probability on
[ 8.525010] Mirror/redirect action on
[ 8.548141] u32 classifier
[ 8.550860] input device check on
[ 8.554569] Actions configured
[ 8.599061] urngd: v1.0.2 started.
[ 8.623191] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
[ 8.799374] Bridge firewalling registered
[ 8.804145] Loading modules backported from Linux version v6.1.97-0-g7753af06eebfb
[ 8.811716] Backport generated by backports.git v6.1.97-1-0-g2431d56e
[ 8.849551] xt_time: kernel timezone is -0000
[ 9.199160] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221208201745a
[ 9.199160]
[ 9.419427] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221208201806
[ 9.530736] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221208202048
[ 9.623079] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
[ 9.631737] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
[ 11.903743] PPP generic driver version 2.4.2
[ 11.909586] PPP MPPE Compression module registered
[ 11.915500] NET: Registered PF_PPPOX protocol family
[ 11.921544] PPTP driver version 0.8.5
[ 11.927856] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 11.935750] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 11.948682] batman_adv: B.A.T.M.A.N. advanced 2023.1-openwrt-7 (compatibility version 15) loaded
[ 11.959225] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.970259] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.147061] mtdblock: MTD device 'Bdata' is NAND, please consider using UBI block devices instead.
[ 21.838978] br-lan: port 1(phy1-ap0) entered blocking state
[ 21.844658] br-lan: port 1(phy1-ap0) entered disabled state
[ 21.850437] device phy1-ap0 entered promiscuous mode
[ 21.855624] br-lan: port 1(phy1-ap0) entered blocking state
[ 21.861206] br-lan: port 1(phy1-ap0) entered forwarding state
[ 21.870825] br-lan: port 1(phy1-ap0) entered disabled state
[ 22.837689] br-lan: port 2(phy0-ap0) entered blocking state
[ 22.843273] br-lan: port 2(phy0-ap0) entered disabled state
[ 22.849159] device phy0-ap0 entered promiscuous mode
[ 22.854302] br-lan: port 2(phy0-ap0) entered blocking state
[ 22.859905] br-lan: port 2(phy0-ap0) entered forwarding state
[ 22.866401] br-lan: port 2(phy0-ap0) entered disabled state
[ 23.039680] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
[ 23.046524] br-lan: port 2(phy0-ap0) entered blocking state
[ 23.052126] br-lan: port 2(phy0-ap0) entered forwarding state
[ 23.060901] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 23.375358] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[ 23.382167] br-lan: port 1(phy1-ap0) entered blocking state
[ 23.387790] br-lan: port 1(phy1-ap0) entered forwarding state
