Full bootlog part 3:
[ 38.409540] ECM init
[ 38.409573] ECM database jhash random seed: 0xbf85dd86
[ 38.411427] ECM init complete
[ 38.421287] ECM OVS Test INIT
[ 38.432510] gpio-keys: write number:0
[ 38.432537] gpio-keys: write number:0
[ 38.648672] Load statistics in AP Mode
[ 38.648729] module inited
[ 38.876764] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x4
[ 38.876835] device eth0 entered promiscuous mode
[ 38.886360] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x3
[ 38.887190] device eth1 entered promiscuous mode
[ 38.894669] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x6
[ 38.898462] device eth2 entered promiscuous mode
[ 38.905117] igmpv3_newpack-375: get ifa from dev[br-wan] ifa_count[0]
[ 38.910305] ppe_port_vsi_get[476]:INFO:VSI is not configured on port 0x5
[ 38.916089] device eth3 entered promiscuous mode
[ 39.019379] igmpv3_newpack-375: get ifa from dev[br-iptv] ifa_count[0]
[ 39.212797] igmpv3_newpack-375: get ifa from dev[br-wan] ifa_count[0]
[ 39.213260] mode:1
[ 39.225173] dlogin_bridge_hook_ops
[ 39.379311] igmpv3_newpack-375: get ifa from dev[br-iptv] ifa_count[0]
[ 40.117770] mode:1
[ 40.117781] dlogin_bridge_hook_ops
[ 42.431256] wlan: [7032:I:RPTR] qca_multi_link_init_module:
[ 42.431256] ******QCA Repeater Initialization Done***********
[ 42.431256]
[ 42.444088] wlan: [7032:I:ANY] qdf_ini_parse: INI values read: 91
[ 42.444101] wlan: [7032:I:ANY] qdf_ini_parse: INI file parse successful
[ 42.450798] wlan: [7032:I:ANY] qdf_ini_parse: INI values read: 62
[ 42.455580] wlan: [7032:I:ANY] qdf_ini_parse: INI file parse successful
[ 42.461847] wlan: [7032:I:ANY] wlan_sawf_init: SAWF: SAWF ctx is initialized
[ 42.540595] wlan: [7039:I:ANY] register_telemetry_agent_ops: Registered Telemetry Agent ops: 00000000bc4c1bc2
[ 42.540785] SAWF Telemetry: SAWF ctx is initialized
[ 42.722889] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x38 Value: 1
[ 42.722910] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x38 Param 3 Value: 1
[ 42.733270] cnss[38]: INFO: Setting cold_boot_support=1 for instance_id 0x38
[ 42.753661] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x39 Value: 1
[ 42.753682] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x39 Param 3 Value: 1
[ 42.762791] cnss[39]: INFO: Setting cold_boot_support=1 for instance_id 0x39
[ 42.778066] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 3 Instance ID: 0x3a Value: 1
[ 42.778087] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x3a Param 3 Value: 1
[ 42.787498] cnss[3a]: INFO: Setting cold_boot_support=1 for instance_id 0x3a
[ 42.942226] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x38 Value: 1
[ 42.942247] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x38 Param 6 Value: 1
[ 42.951238] cnss[38]: INFO: Setting qdss_support=1 for instance_id 0x38
[ 42.967902] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x39 Value: 1
[ 42.967923] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x39 Param 6 Value: 1
[ 42.977171] cnss[39]: INFO: Setting qdss_support=1 for instance_id 0x39
[ 42.994258] cnss: INFO: cnss_plat_ipc_qmi_send_config_param_req_handler: Param: 6 Instance ID: 0x3a Value: 1
[ 42.994279] cnss: INFO: cnss_config_param_update_cb: Instance ID: 0x3a Param 6 Value: 1
[ 43.003229] cnss[3a]: INFO: Setting qdss_support=1 for instance_id 0x3a
[ 43.234734] wlan: [7439:I:ANY] =======ol_if_register_wifi3_0==========
[ 43.234734]
[ 43.234784] remoteproc remoteproc0: powering up QCN9224_PCI1
[ 43.244401] remoteproc remoteproc0: Booting fw image qcn9224/amss.bin, size 6270976
[ 43.247485] cnss_pci 0002:01:00.0: BAR 0: assigned [mem 0x10400000-0x105fffff 64bit]
[ 43.254888] cnss_pci 0002:01:00.0: enabling device (0000 -> 0002)
[ 43.263830] cnss_pci 0002:01:00.0: DMA Memory initialized at 0x000000007e000000 size 0xf00000
[ 43.269057] cnss[38]: INFO: SOC VERSION INFO: Family num: 0x4, Device num: 0x1a, Major Ver: 0x2, Minor Ver: 0x0
[ 43.278180] cnss[38]: INFO: Setting 0x31 to QRTR_NODE_ID_REG
[ 43.287212] cnss[38]: INFO: Value from QRTR_NODE_ID_REG: 0x31
[ 43.293107] mhi mhi0: Requested to power ON
[ 43.298849] mhi mhi0: Power on setup success
[ 43.302846] mhi mhi0: License or secdat file is empty in DTS node,Assuming no License or ftm mode
[ 43.437986] mhi mhi0: qrtr_instance_id not defined in DT, ret:-22
[ 43.489347] mhi mhi0: Wait for device to enter SBL or Mission mode
[ 43.498934] edma_cfg_rx_rps[1542]:EDMA RPS configured to use 4 cores
[ 43.920557] cnss[38]: INFO: MHI status cb is called with reason MISSION MODE(5)
[ 43.920701] mhi_uci mhi0_LOOPBACK: channel:LOOPBACK successfully probed
[ 43.929890] cnss[38]: INFO: QMI WLFW service connected, state: 0x10011
[ 43.934460] cnss[38]: INFO: FW INI CFG file qcn9224/fw_ini_cfg.bin is present
[ 43.940014] cnss[38]: INFO: device_id : 4361 mem mode : [0]
[ 43.947053] cnss[38]: INFO: platform name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C4
[ 43.948204] cnss[38]: INFO: FW File 0 download
[ 43.965830] cnss[38]: INFO: cnss_cal_db_mem_update: File Operation 1 size 8011776 file name wlfw_cal_01_QCN9224_PCI1.bin
[ 44.039341] remoteproc remoteproc0: remote processor QCN9224_PCI1 is now up
[ 44.039871] cnss[38]: INFO: Waiting for FW ready. Device: 0x1109, FW ready timeout: 15 seconds
[ 44.219361] igmpv3_newpack-375: get ifa from dev[br-wan] ifa_count[0]
[ 44.269779] cnss[38]: INFO: Device memory info[0]: start = 0x10e000, size = 0x2000
[ 44.274870] cnss[38]: INFO: Device memory info[1]: start = 0x0, size = 0x0
[ 44.274871] cnss[38]: INFO: Device memory info[2]: start = 0x0, size = 0x0
[ 44.274873] cnss[38]: INFO: Device memory info[3]: start = 0x0, size = 0x0
[ 44.274878] cnss[38]: INFO: Target capability: chip_id: 0x0, chip_family: 0xb, board_id: 0xff, soc_id: 0x401a2200, fw_version: 0x10067fff, fw_build_timestamp: 2023-09-12 00:11, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 1 rxgainlut_support 1
[ 44.274969] cnss[38]: INFO: Downloading BDF: qcn9224/regdb.bin, size: 25656
[ 44.340492] cnss[38]: INFO: Downloading BDF: qcn9224/bdwlan.b0001, size: 63488
[ 44.359840] tipc: Started in network mode
[ 44.359856] tipc: Own node identity a9a94001, cluster identity 4711
[ 44.363144] tipc: 32-bit node address hash set to a9a94001
[ 44.366147] cnss[38]: INFO: Downloading BDF: qcn9224/caldata_2.bin, size: 184320
[ 44.371179] tipc: Enabled bearer <deco:br-lan:1>, priority 10
[ 44.539345] cnss[38]: INFO: FW ready received for device 0x1109
[ 44.540885] cnss[38]: INFO: Sending mode message, mode: COLDBOOT CALIBRATION(7), state: 0x1010f
[ 44.614105] S95done (8497): drop_caches: 3
[ 44.829305] igmpv3_newpack-375: get ifa from dev[br-wan] ifa_count[0]
[ 45.409369] g_back_dev_num:7
[ 46.496619] remoteproc remoteproc1: powering up QCN9224_PCI2
[ 46.499617] remoteproc remoteproc1: Booting fw image qcn9224/amss.bin, size 6270976
[ 46.501376] cnss_pci 0003:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
[ 46.508764] cnss_pci 0003:01:00.0: enabling device (0000 -> 0002)
[ 46.509335] cnss[38]: INFO: Calibration took 1970 ms
[ 46.516705] cnss[38]: INFO: Coldboot Calbration wait started for Device: 0x1109, timeout: 60 seconds
[ 46.523062] cnss[38]: INFO: Coldboot Calibration completed successfully for device 0x1109
[ 46.528836] cnss_pci 0003:01:00.0: DMA Memory initialized at 0x000000007d100000 size 0xf00000
[ 46.536905] cnss[38]: INFO: cnss_cal_db_mem_update: File Operation 0 size 4088560 file name wlfw_cal_01_QCN9224_PCI1.bin
[ 46.545071] cnss[39]: INFO: SOC VERSION INFO: Family num: 0x4, Device num: 0x1a, Major Ver: 0x2, Minor Ver: 0x0
[ 46.553482] cnss: INFO: cnss_plat_ipc_qmi_file_upload: File name: wlfw_cal_01_QCN9224_PCI1.bin Size: 4088560
[ 46.565266] cnss[39]: INFO: Setting 0x32 to QRTR_NODE_ID_REG
[ 46.584243] cnss[39]: INFO: Value from QRTR_NODE_ID_REG: 0x32
[ 46.589897] mhi mhi1: Requested to power ON
[ 46.595639] mhi mhi1: Power on setup success
[ 46.599623] mhi mhi1: License or secdat file is empty in DTS node,Assuming no License or ftm mode
[ 46.639301] cnss[38]: INFO: Coldboot Calibration wait ended for device 0x1109
[ 46.639319] cnss[38]: INFO: Sending mode message, mode: OFF(4), state: 0x10107
[ 46.646647] cnss[38]: INFO: QMI WLFW service disconnected, state: 0x10106
[ 46.646670] cnss[38]: INFO: Shutting down QCN9224_PCI1
[ 46.709329] mhi mhi0: destroy device for chan:LOOPBACK
[ 46.709376] mhi mhi0: mhi_reset_data_chan rp 0000000000000000 wp 0000000000000000
[ 46.713342] mhi mhi0: mhi_reset_data_chan rp 0000000000000000 wp 0000000000000000
[ 46.720970] mhi mhi0: destroy device for chan:DIAG
[ 46.728371] mhi mhi0: mhi_reset_data_chan rp 00000000581bdd52 wp 00000000d57819f8
[ 46.732140] mhi mhi1: qrtr_instance_id not defined in DT, ret:-22
[ 46.733077] mhi mhi0: mhi_reset_data_chan rp 00000000613cbade wp 00000000613cbade
[ 46.742787] mhi mhi1: Wait for device to enter SBL or Mission mode
[ 46.746740] mhi mhi0: destroy device for chan:IPCR
[ 46.760241] mhi mhi0: mhi_reset_data_chan rp 000000007f04d948 wp 00000000daef21f1
[ 46.765229] mhi mhi0: mhi_reset_data_chan rp 000000007566ca98 wp 000000007566ca98
[ 46.772620] mhi mhi0: mhi_cntrl dev_wake state 0
[ 46.819339] remoteproc remoteproc0: stopped remote processor QCN9224_PCI1
[ 46.819353] cnss[38]: INFO: __cnss_subsystem_get: driver_state: 0x0
[ 46.825085] remoteproc remoteproc0: powering up QCN9224_PCI1
[ 46.831204] remoteproc remoteproc0: Booting fw image qcn9224/amss.bin, size 6270976
[ 46.837078] wlan: [136:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 0
[ 46.844472] cnss_pci 0002:01:00.0: BAR 0: assigned [mem 0x10400000-0x105fffff 64bit]
[ 46.851952] cnss_pci 0002:01:00.0: DMA Memory initialized at 0x000000007e000000 size 0xf00000
[ 46.859035] cnss[38]: INFO: SOC VERSION INFO: Family num: 0x4, Device num: 0x1a, Major Ver: 0x2, Minor Ver: 0x0
[ 46.868080] cnss[38]: INFO: Setting 0x31 to QRTR_NODE_ID_REG
[ 46.877173] cnss[38]: INFO: Value from QRTR_NODE_ID_REG: 0x31
[ 46.883082] mhi mhi0: Requested to power ON
[ 46.888796] mhi mhi0: Power on setup success
[ 46.888887] mhi mhi0: License or secdat file is empty in DTS node,Assuming no License or ftm mode
[ 47.028275] mhi mhi0: qrtr_instance_id not defined in DT, ret:-22
[ 47.036185] mhi mhi0: Wait for device to enter SBL or Mission mode
[ 47.182313] cnss[39]: INFO: MHI status cb is called with reason MISSION MODE(5)
[ 47.182467] mhi_uci mhi1_LOOPBACK: channel:LOOPBACK successfully probed
[ 47.191877] cnss[39]: INFO: QMI WLFW service connected, state: 0x10011
[ 47.196266] cnss[39]: INFO: FW INI CFG file qcn9224/fw_ini_cfg.bin is present
[ 47.201723] cnss[39]: INFO: device_id : 4361 mem mode : [0]
[ 47.208811] cnss[39]: INFO: platform name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C4
[ 47.210030] cnss[39]: INFO: FW File 0 download
[ 47.227698] cnss[39]: INFO: cnss_cal_db_mem_update: File Operation 1 size 8011776 file name wlfw_cal_01_QCN9224_PCI2.bin
[ 47.299327] remoteproc remoteproc1: remote processor QCN9224_PCI2 is now up
[ 47.299348] cnss[39]: INFO: Waiting for FW ready. Device: 0x1109, FW ready timeout: 15 seconds
[ 47.472580] cnss[38]: INFO: MHI status cb is called with reason MISSION MODE(5)
[ 47.472744] mhi_uci mhi0_LOOPBACK: channel:LOOPBACK successfully probed
[ 47.482090] cnss[38]: INFO: QMI WLFW service connected, state: 0x11
[ 47.486519] cnss[38]: INFO: FW INI CFG file qcn9224/fw_ini_cfg.bin is present
[ 47.491586] cnss[38]: INFO: device_id : 4361 mem mode : [0]
[ 47.498820] cnss[38]: INFO: platform name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C4
[ 47.498825] cnss[38]: INFO: MLO Capabilities added to QMI Host Cap msg
[ 47.513803] cnss[38]: INFO: FW File 0 download
[ 47.529615] cnss[39]: INFO: Device memory info[0]: start = 0x10e000, size = 0x2000
[ 47.534409] cnss[39]: INFO: Device memory info[1]: start = 0x0, size = 0x0
[ 47.542167] cnss[39]: INFO: Device memory info[2]: start = 0x0, size = 0x0
[ 47.548920] cnss[39]: INFO: Device memory info[3]: start = 0x0, size = 0x0
[ 47.555829] cnss[39]: INFO: Target capability: chip_id: 0x0, chip_family: 0xb, board_id: 0xff, soc_id: 0x401a2200, fw_version: 0x10067fff, fw_build_timestamp: 2023-09-12 00:11, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 1 rxgainlut_support 1
[ 47.565505] cnss[39]: INFO: Downloading BDF: qcn9224/regdb.bin, size: 25656
[ 47.589302] wlan: [136:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 0
[ 47.594230] wlan: [136:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[ 47.600838] wlan: [136:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[ 47.607267] cnss[38]: INFO: Waiting for FW ready. Device: 0x1109, FW ready timeout: 15 seconds
[ 47.613905] cnss[39]: INFO: Downloading BDF: qcn9224/bdwlan.b0002, size: 100352
[ 47.651275] cnss[39]: INFO: Downloading BDF: qcn9224/caldata_3.bin, size: 184320
[ 47.779300] cnss[39]: INFO: FW ready received for device 0x1109
[ 47.780481] cnss[39]: INFO: Sending mode message, mode: COLDBOOT CALIBRATION(7), state: 0x1010f
[ 47.866826] cnss[38]: INFO: Device memory info[0]: start = 0x10e000, size = 0x2000
[ 47.866842] cnss[38]: INFO: Device memory info[1]: start = 0x0, size = 0x0
[ 47.873290] cnss[38]: INFO: Device memory info[2]: start = 0x0, size = 0x0
[ 47.880130] cnss[38]: INFO: Device memory info[3]: start = 0x0, size = 0x0
[ 47.886987] cnss[38]: INFO: Target capability: chip_id: 0x0, chip_family: 0xb, board_id: 0xff, soc_id: 0x401a2200, fw_version: 0x10067fff, fw_build_timestamp: 2023-09-12 00:11, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 1 rxgainlut_support 1
[ 47.896624] cnss[38]: INFO: Downloading BDF: qcn9224/regdb.bin, size: 25656
[ 47.924982] cnss[38]: INFO: Downloading BDF: qcn9224/bdwlan.b0001, size: 63488
[ 47.938638] cnss[38]: INFO: Downloading BDF: qcn9224/caldata_2.bin, size: 184320
[ 48.089299] cnss[38]: INFO: FW ready received for device 0x1109
[ 48.091782] cnss[38]: INFO: Sending mode message, mode: MISSION(0), state: 0x17
[ 49.591483] cnss[38]: INFO: Starting QDSS for QCN9224_PCI1
[ 49.591498] cnss[38]: INFO: Sending QDSS config download message, state: 0x17
[ 49.596380] cnss[38]: INFO: No Custom QDSS config found, loading default file qcn9224/qdss_trace_config.bin
[ 49.604790] wlan: [136:I:ANY] qca_napi_create: napi instance 0 created on pipe 4
[ 49.612753] wlan: [136:I:ANY] __ol_ath_attach: Allocated soc 00000000ee5b6602
[ 49.620248] cnss[38]: INFO: Sending QDSS Mode 1, option 0
[ 49.620307] wlan: [136:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[ 49.635758] wlan: [136:I:ANY] qdf_ini_parse: INI values read: 0
[ 49.643253] wlan: [136:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format
[ 49.648969] wlan: [136:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCN9224.ini; status:4
[ 49.671556] wlan: [136:I:ANY] qdf_ini_parse: INI values read: 86
[ 49.671568] wlan: [136:I:ANY] qdf_ini_parse: INI file parse successful
[ 49.677031] wlan: [136:I:ANY] qdf_ini_section_parse: INI values parse successful read: 6 from section 512M_OR_DP_MON_4CHAIN
[ 49.682965] wlan: [136:I:ANY] wlan_twt_cfg_init: ME-DBG
[ 49.693980] wlan: [136:I:ANY] __ol_ath_attach: dev name soc0
[ 49.699336] wlan: [136:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 0000000076c03512
[ 49.712947] wlan: [136:I:ANY] htc_wmi_init: HTC Pipe Ready Timeout 6000ms
[ 49.713170] wlan: [136:I:ANY] htc_wmi_init: HT Create . 00000000c1e1f1fd
[ 49.720116] wlan: [136:I:ANY] htc_wmi_init: Skipping BMI Done
[ 49.726866] wlan: [136:I:ANY] htc_wmi_init: host_enable 0
[ 49.739984] remoteproc remoteproc2: powering up QCN9224_PCI3
[ 49.739999] remoteproc remoteproc2: Booting fw image qcn9224/amss.bin, size 6270976
[ 49.744738] cnss_pci 0004:01:00.0: BAR 0: assigned [mem 0x18400000-0x185fffff 64bit]
[ 49.752091] cnss[39]: INFO: Calibration took 1970 ms
[ 49.755532] cnss[39]: INFO: Coldboot Calbration wait started for Device: 0x1109, timeout: 60 seconds
[ 49.760063] cnss[39]: INFO: Coldboot Calibration completed successfully for device 0x1109
[ 49.760124] cnss_pci 0004:01:00.0: enabling device (0000 -> 0002)
[ 49.761065] cnss_pci 0004:01:00.0: DMA Memory initialized at 0x000000007c200000 size 0xf00000
[ 49.761187] cnss[3a]: INFO: SOC VERSION INFO: Family num: 0x4, Device num: 0x1a, Major Ver: 0x2, Minor Ver: 0x0
[ 49.761979] cnss[3a]: INFO: Setting 0x33 to QRTR_NODE_ID_REG
[ 49.761982] cnss[3a]: INFO: Value from QRTR_NODE_ID_REG: 0x33
[ 49.761986] mhi mhi2: Requested to power ON
[ 49.762082] mhi mhi2: Power on setup success
[ 49.762172] mhi mhi2: License or secdat file is empty in DTS node,Assuming no License or ftm mode
[ 49.769547] wlan: [136:I:ANY] ol_target_init_complete: CDP soc attach success
[ 49.774137] cnss[39]: INFO: cnss_cal_db_mem_update: File Operation 0 size 4576784 file name wlfw_cal_01_QCN9224_PCI2.bin
[ 49.782285] wlan: [136:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 00000000c1e1f1fd, ep 2, value 1
[ 49.788266] cnss: INFO: cnss_plat_ipc_qmi_file_upload: File name: wlfw_cal_01_QCN9224_PCI2.bin Size: 4576784
[ 49.796823] wlan: [136:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 00000000c1e1f1fd, ep 3, value 1
[ 49.873249] wlan: [136:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 00000000c1e1f1fd, ep 4, value 1
[ 49.882990] cnss[39]: INFO: Coldboot Calibration wait ended for device 0x1109
[ 49.892809] mhi mhi2: qrtr_instance_id not defined in DT, ret:-22
[ 49.892889] cnss[39]: INFO: Sending mode message, mode: OFF(4), state: 0x10107
[ 49.893497] wlan: [1307:I:TIF] HE_CAP Info = 9a18010d
[ 49.893499] wlan: [1307:I:TIF] Num HW modes = 1
[ 49.893501] wlan: [1307:I:TIF] Num PHY = 1
[ 49.893503] wlan: [1307:I:TIF] FW Build Version (Ext.) = 69
[ 49.893505] wlan: [1307:I:TIF] HDL Version: MajorVersion.MinorVersion = 5.1
[ 49.893507] wlan: [1307:I:TIF] 11BE suport 1
[ 49.893509] wlan: [1307:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[ 49.893751] wlan: [1307:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[ 49.893754] wlan: [1307:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[ 49.893758] wlan: [1307:I:ANY] BDF version: 2 CAL version: 2 Status: 0
[ 49.894094] wlan: [1307:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[ 49.894259] wlan: [1307:I:ANY] qdf_ini_section_parse: INI values parse successful read: 6 from section 2G
[ 49.894265] wlan: [1307:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:2
[ 49.894267] wlan: [1307:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>2
[ 49.894269] wlan: [1307:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0
[ 49.894271] wlan: [1307:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 8
[ 49.894274] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894277] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894279] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894281] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894283] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894284] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894286] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894288] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894290] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894292] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894294] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894296] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894297] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894299] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894301] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894303] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 5
[ 49.894305] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x55555555
[ 49.894307] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x55555555
[ 49.894309] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 32
[ 49.894311] wlan: [1307:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 0x46
[ 49.894312] wlan: [1307:I:MBSSIE] ol_ath_ema_init_ctx: max_pp:8 max_ngroups:1
[ 49.894314] wlan: [1307:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz :1446
[ 49.894316] wlan: [1307:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :190
[ 49.894318] wlan: [1307:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp :8
[ 49.894320] wlan: [1307:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn: 7
[ 49.894321] wlan: [1307:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 56
[ 49.894323] wlan: [1307:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp: 32
[ 49.894325] wlan: [1307:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup: 1
[ 49.894327] wlan: [1307:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz: 16
[ 49.894328] wlan: [1307:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[ 49.894430] wlan: [1307:I:ANY] qdf_ini_section_parse: INI values parse successful read: 1 from section SINGLE_PHY_2G
[ 49.894435] wlan: [1307:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[ 49.894437] wlan: [1307:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[ 49.894439] wlan: [1307:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[ 49.894441] wlan: [1307:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[ 49.894442] wlan: [1307:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[ 49.894444] wlan: [1307:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[ 49.894447] wlan: [1307:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[ 49.894448] wlan: [1307:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[ 49.894450] wlan: [1307:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[ 49.894452] wlan: [1307:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[ 49.894453] wlan: [1307:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[ 49.894455] wlan: [1307:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[ 49.894460] wlan: [1307:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:0000000076c03512
[ 49.901991] wlan: [1307:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 529 vdevs = 17
[ 49.902312] mhi mhi2: Wait for device to enter SBL or Mission mode
[ 49.907085] cnss[39]: INFO: Shutting down QCN9224_PCI2
[ 49.907134] cnss[39]: INFO: QMI WLFW service disconnected, state: 0x10026
[ 49.913032] wlan: [1307:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[ 49.969317] mhi mhi1: destroy device for chan:LOOPBACK
[ 50.072768] wlan: [1307:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[ 50.077797] mhi mhi1: mhi_reset_data_chan rp 0000000000000000 wp 0000000000000000
[ 50.226351] wlan: [1307:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[ 50.233246] mhi mhi1: mhi_reset_data_chan rp 0000000000000000 wp 0000000000000000
[ 50.241675] wlan: [1307:E:TIF] init_deinit_ready_event_handler: Host Requested 529 peers. FW Supports 145 peers
[ 50.249815] mhi mhi1: destroy device for chan:DIAG
[ 50.258123] wlan: [136:I:ANY] ol_ath_connect_htc: WMI is ready
[ 50.266593] mhi mhi1: mhi_reset_data_chan rp 000000002c8c4a04 wp 00000000d3fd8085
[ 50.275314] wlan: [136:I:ANY] ol_ath_soc_attach: connect HTC
[ 50.283866] mhi mhi1: mhi_reset_data_chan rp 00000000775a3e63 wp 00000000775a3e63
[ 50.292522] wlan: [136:I:ANY] ol_ath_soc_attach: bypasswmi : 0
[ 50.301189] mhi mhi1: destroy device for chan:IPCR
[ 50.308420] wlan: [136:I:ANY] ol_ath_soc_attach: UMAC attach
[ 50.319118] mhi mhi1: mhi_reset_data_chan rp 00000000f69f441e wp 00000000e0e5c76e
[ 50.326691] wlan: [136:I:ANY] __ol_ath_attach: pdev_netdev name wifi0
[ 50.334242] cnss[3a]: INFO: MHI status cb is called with reason MISSION MODE(5)
[ 50.334429] mhi mhi1: mhi_reset_data_chan rp 00000000aca06152 wp 00000000aca06152
[ 50.342007] wlan: [136:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target
[ 50.349565] mhi_uci mhi2_LOOPBACK: channel:LOOPBACK successfully probed
[ 50.357648] wlan: [136:I:ANY] __ol_ath_attach: BURSTING enabled by default
[ 50.365349] mhi mhi1: mhi_cntrl dev_wake state 0
[ 50.368407] cnss[3a]: INFO: QMI WLFW service connected, state: 0x10011
[ 50.372602] cnss[3a]: INFO: FW INI CFG file qcn9224/fw_ini_cfg.bin is present
[ 50.372623] wlan: [136:I:ANY] ol_ath_pdev_attach: interface_id 0
[ 50.372631] wlan: [136:I:TIF] ol_ath_pdev_regdmn_init: phy id = 0 Modes supported
[ 50.372634] wlan: [136:I:TIF] ol_ath_pdev_regdmn_init: 11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1 11be = 1
[ 50.372638] wlan: [136:I:TIF] ol_ath_pdev_regdmn_init: Reg cap - phy_id = 0 supp_bnd = 1, modes = d0680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
[ 50.372640] wlan: [136:I:ANY] ol_ath_update_wireless_modes: wireless_modes = d0680680c before update
[ 50.372642] wlan: [136:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = d0680680c after update
[ 50.372646] wlan: [136:I:ANY] ol_ath_update_ext_he_caps: 11ax 2G supported case
[ 50.372648] wlan: [136:I:ANY] ol_ath_update_ext_eht_caps: 11be 2G supported case
[ 50.372652] wlan: [136:I:TIF] ol_ath_update_ic_ehtcap_mcsnssmap_from_target: bwidx = 0 mcsnssmap 44444444 rxmap 4444 txmap 4444
[ 50.372654] wlan: [136:I:TIF] ol_ath_update_ic_ehtcap_mcsnssmap_from_target: bwidx = 1 mcsnssmap 444444 rxmap 4444 txmap 4444
[ 50.372805] wlan: [136:I:MBSSIE] ieee80211_mbss_attach: :>
[ 50.372808] wlan: [136:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[ 50.372810] wlan: [136:I:ANY] ol_resmgr_create: OL Resmgr Init-ed
[ 50.372956] wlan: [136:I:ANY] acfg_attach: acfg_attach: 3532: Netlink socket created:00000000661aaf56
[ 50.372963] wlan: [136:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1
[ 50.373155] wlan: [136:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[ 50.373176] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[1], ptr:0000000080b6600a
[ 50.373181] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(00000000c0928b1e) Enabling DBDC Repeater 0 soc_lag 00000000d95fa366
[ 50.373185] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(00000000c0928b1e) is_primary 0
[ 50.373592] wlan: [136:E:CFR] wlan_cfr_pdev_open: cfr is disabled
[ 50.373606] wlan: [136:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5
[ 50.373606]
[ 50.373616] wlan: [136:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 2, metadata : 0x4d2,pdev_id = 0, REO dest ring = 5
[ 50.373616]
[ 50.373623] wlan: [136:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 3, metadata : 0x10e1,pdev_id = 0, REO dest ring = 5
[ 50.373623]
[ 50.373667] wlan: [136:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[ 50.373673] wlan: [136:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 32768
[ 50.373700] wlan: [136:I:ANY] __ol_ath_attach: needed_headroom reservation 60
[ 50.373711] wlan: [136:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11
[ 50.373806] wlan: [136:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0x0000000096c8be5a, wdev: 0x00000000c41b6983, wiphy: 0x000000005d0081a3, netdev: 0x00000000274f3908
[ 50.374127] wlan: [136:I:ANY] ol_ath_thermal_param_init: Thermal Config for WKK zone 0
[ 50.374130] wlan: [136:I:ANY] ol_ath_thermal_param_init: Thermal Config for WKK zone 1
[ 50.374132] wlan: [136:I:ANY] ol_ath_thermal_param_init: Thermal Config for WKK zone 2
[ 50.374134] wlan: [136:I:ANY] ol_ath_thermal_param_init: Thermal Config for WKK zone 3
[ 50.374151] wlan: [136:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[ 50.374277] wlan: [136:E:QLD] qld_register: Handle or address is NULL
[ 50.374293] wlan: [136:I:ANY] wlan_pdev_operation: num_radios=1, wifi_radios[0].sc = 0000000096c8be5a_radio_type = 2
[ 50.374310] remoteproc remoteproc0: remote processor QCN9224_PCI1 is now up
[ 50.419387] remoteproc remoteproc1: stopped remote processor QCN9224_PCI2
[ 50.420398] cnss[3a]: INFO: device_id : 4361 mem mode : [0]
[ 50.426863] ***** Fast boot is disabled for first boot wifi0 *****
[ 50.430478] cnss[39]: INFO: Previous target is probed
[ 50.436010] cnss[3a]: INFO: platform name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C4
[ 50.437217] cnss[3a]: INFO: FW File 0 download
[ 50.441283] cnss[39]: INFO: __cnss_subsystem_get: driver_state: 0x0
[ 50.455848] cnss[3a]: INFO: cnss_cal_db_mem_update: File Operation 1 size 8011776 file name wlfw_cal_01_QCN9224_PCI3.bin
[ 50.460931] remoteproc remoteproc1: powering up QCN9224_PCI2
[ 50.460935] remoteproc remoteproc1: Booting fw image qcn9224/amss.bin, size 6270976
[ 50.460961] wlan: [2227:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 0
[ 50.479309] remoteproc remoteproc2: remote processor QCN9224_PCI3 is now up
[ 50.480627] cnss_pci 0003:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
[ 50.488961] cnss[3a]: INFO: Waiting for FW ready. Device: 0x1109, FW ready timeout: 15 seconds
[ 50.497461] cnss_pci 0003:01:00.0: DMA Memory initialized at 0x000000007d100000 size 0xf00000
[ 50.774867] cnss[3a]: INFO: Device memory info[0]: start = 0x10e000, size = 0x2000
[ 50.782215] cnss[39]: INFO: SOC VERSION INFO: Family num: 0x4, Device num: 0x1a, Major Ver: 0x2, Minor Ver: 0x0
[ 50.788439] cnss[3a]: INFO: Device memory info[1]: start = 0x0, size = 0x0
[ 50.805654] cnss[39]: INFO: Setting 0x32 to QRTR_NODE_ID_REG
[ 50.821447] cnss[3a]: INFO: Device memory info[2]: start = 0x0, size = 0x0
[ 50.837922] cnss[39]: INFO: Value from QRTR_NODE_ID_REG: 0x32
[ 50.837927] mhi mhi1: Requested to power ON
[ 50.846868] cnss[3a]: INFO: Device memory info[3]: start = 0x0, size = 0x0
[ 50.856328] mhi mhi1: Power on setup success
[ 50.856419] mhi mhi1: License or secdat file is empty in DTS node,Assuming no License or ftm mode