Here is the information I found on the hardware:
- IPQ5018-soc
- 512 MB SDRAM DDR3L
- 2,4GHz, 5GHz and 6GHz
- 1Gb/s WAN port and 1Gb/s LAN port
Logs at startup:
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00075
S - IMAGE_VARIANT_STRING=MAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c5
B - 126 - PBL, Start
B - 1557 - bootable_media_detect_entry, Start
B - 3843 - bootable_media_detect_success, Start
B - 3846 - elf_loader_entry, Start
B - 9261 - auth_hash_seg_entry, Start
B - 30169 - auth_hash_seg_exit, Start
B - 126781 - elf_segs_hash_verify_entry, Start
B - 196427 - PBL, End
B - 160521 - SBL1, Start
B - 221887 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4
B - 230061 - clock_init, Start
D - 7259 - clock_init, Delta
B - 237473 - boot_flash_init, Start
D - 20587 - boot_flash_init, Delta
B - 258121 - boot_config_data_table_init, Start
D - 5307 - boot_config_data_table_init, Delta - (575 Bytes)
B - 266478 - Boot Setting : 0x00030618
B - 272670 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:4
B - 279593 - sbl1_ddr_set_params, Start
B - 281210 - Pre_DDR_clock_init, Start
B - 286852 - Pre_DDR_clock_init, End
B - 928938 - do ddr sanity test, Start
D - 61 - do ddr sanity test, Delta
B - 933605 - Image Load, Start
D - 267210 - QSEE Image Loaded, Delta - (587396 Bytes)
B - 1201669 - Image Load, Start
D - 25285 - DEVCFG Image Loaded, Delta - (19992 Bytes)
B - 1226984 - Image Load, Start
D - 202429 - APPSBL Image Loaded, Delta - (443584 Bytes)
B - 1429474 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 1435940 - SBL1, End
D - 1277920 - SBL1, Delta
S - Flash Throughput, 2322 KB/s (1052219 Bytes, 453041 us)
S - DDR Frequency, 800 MHz
S - Core 0 Frequency, 800 MHz
U-Boot 2016.01 (Feb 03 2023 - 09:15:14 +0000)
CBT U-Boot ver: 7.1.25 ([IPQ5018].[SPF12.1].[CS1])
DRAM: smem ram ptable found: ver: 1 len: 4
512 MiB
NAND: QPIC controller support serial NAND
ID = 3a6c2
Vendor = c2
Device = a6
Serial Nand Device Found With ID : 0xc2 0xa6
Serial NAND device Manufacturer:MX35UF2GE4AD
Device Size:256 MiB, Page size:2048, Spare Size:128, ECC:8-bit
qpic_nand: changing oobsize to 80 from 128 bytes
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC: sdhci: Node Not found, skipping initialization
PCI Link Intialized
PCI Link Intialized
In: serial@78AF000
Out: serial@78AF000
Err: serial@78AF000
machid: 8040004
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
> parittion 2 is active
auto-recovery enabled:1, boot_part:2, boot_part_ready:3
#### auto_recovery ####
#### boot_count = 0 ####
Updating boot_count ... done
Hit any key to stop autoboot: 0
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 50 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 728048624
ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 40
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4829616)
Read 0 bytes from volume ubi_rootfs to 45000028
No size specified -> Using max size (38854656)
Rootfs image authentication successful
Manual device tree config selected!
## Loading kernel from FIT Image at 44000028 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-5.4.164
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x4400010c
Data Size: 4770511 Bytes = 4.5 MiB
Architecture: ARM
OS: Linux
Load Address: 0x41208000
Entry Point: 0x41208000
Hash algo: crc32
Hash value: a8446d27
Hash algo: sha1
Hash value: 6e66b1eeaf288e00b77a161d9d946ef2b2892d17
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000028 ...
Using 'config@1' configuration
Trying 'fdt@1' fdt subimage
Description: ARM OpenWrt Maple device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4448cd0c
Data Size: 44361 Bytes = 43.3 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 687eb99b
Hash algo: sha1
Hash value: a04ebe1c21bec2c9c47eaa40babfe2d72765ffda
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4448cd0c
Uncompressing Kernel Image ... OK
Loading Device Tree to 4a3f2000, end 4a3ffd48 ... OK
Using machid 0x8040004 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.164 (root@ip-10-0-0-174) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r0+12639-06c3e847c3)) #1 SMP PREEMPT Tue Nov 14 15:49:00 PST 2023
[ 0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1
[ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x41000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
[ 0.000000] q6_code_data@4B000000 (0x4b000000--0x4b060000) overlaps with q6_mem_regions@4B000000 (0x4b000000--0x4fd00000)
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
[ 0.000000] q6_mem_regions@4B000000 (0x4b000000--0x4fd00000) overlaps with q6_ipq5018_data@4C400000 (0x4c400000--0x4d100000)
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] percpu: Embedded 15 pages/cpu s32140 r8192 d21108 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 104100
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 coherent_pool=2M
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 405412K/420864K available (6714K kernel code, 342K rwdata, 2136K rodata, 1024K init, 367K bss, 15452K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] GICv2m: range[mem 0x0b00b000-0x0b00bffc], SPI[480:511]
[ 0.000000] random: get_random_bytes called from start_kernel+0x2e0/0x508 with crng_init=0
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000018] Switching to timer-based delay loop, resolution 41ns
[ 0.000401] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000420] pid_max: default: 32768 minimum: 301
[ 0.000603] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000616] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001633] CPU: Testing write buffer coherency: ok
[ 0.002090] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003010] Setting up static identity map for 0x41300000 - 0x41300060
[ 0.003212] rcu: Hierarchical SRCU implementation.
[ 0.006158] smp: Bringing up secondary CPUs ...
[ 0.007260] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007455] smp: Brought up 1 node, 2 CPUs
[ 0.007476] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.007482] CPU: All CPU(s) started in SVC mode.
[ 0.017752] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4
[ 0.018190] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018216] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.018387] pinctrl core: initialized pinctrl subsystem
[ 0.019631] NET: Registered protocol family 16
[ 0.021166] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.022457] cpuidle: using governor ladder
[ 0.022519] cpuidle: using governor menu
[ 0.022764] NET: Registered protocol family 42
[ 0.023199] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.023211] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.072138] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider
[ 0.090507] msm_sps_probe: sps:sps is ready
[ 3.099826] pps_core: LinuxPPS API ver. 1 registered
[ 3.099840] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.099867] PTP clock support registered
[ 3.100994] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 3.102373] clocksource: Switched to clocksource arch_sys_counter
[ 3.103480] thermal_sys: Registered thermal governor 'step_wise'
[ 3.103485] thermal_sys: Registered thermal governor 'user_space'
[ 3.104617] NET: Registered protocol family 2
[ 3.104786] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 3.105901] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 3.105945] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 3.105997] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 3.106072] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.106198] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.106231] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 3.106489] NET: Registered protocol family 1
[ 3.106548] PCI: CLS 0 bytes, default 64
[ 3.107422] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 3.108958] Initialise system trusted keyrings
[ 3.109281] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 3.115606] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.115623] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 3.144608] Key type asymmetric registered
[ 3.144629] Asymmetric key parser 'x509' registered
[ 3.147788] bam-dma-engine 704000.dma: num-channels unspecified in dt
[ 3.147805] bam-dma-engine 704000.dma: num-ees unspecified in dt
[ 3.148730] bam-dma-engine 7884000.dma: qcom,controlled-remotely unspecified
[ 3.149817] bam-dma-engine 7984000.dma: qcom,controlled-remotely unspecified
[ 3.152052] CPU: IPQ5018, SoC Version: 1.1
[ 3.152063] OEM_ID: 30513, PROD_ID: 13624
[ 3.152996] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[ 3.154295] 58000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 31, base_baud = 0) is a EUD UART
[ 3.154920] msm_serial 78af000.serial: msm_serial: detected port #0
[ 3.154969] msm_serial 78af000.serial: uartclk = 1843199
[ 3.155044] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 30, base_baud = 115199) is a MSM
[ 3.155079] msm_serial: console setup on port #0
[ 3.792382] printk: console [ttyMSM0] enabled
[ 3.797391] msm_serial: driver initialized
[ 3.801823] random: fast init done
[ 3.805466] random: crng init done
[ 3.813737] brd: module loaded
[ 3.818702] loop: module loaded
[ 3.820117] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xa6
[ 3.820643] nand: Macronix MX35UF2GE4AD-Z4I SPI NAND 2G 1.8V
[ 3.827299] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 3.833133] qcom-nandc 79b0000.qpic-nand: x4 mode enabled already remotely
[ 3.843149] qcom-nandc 79b0000.qpic-nand: Error in reading max io macro clock from dts
[ 3.847318] 22 fixed-partitions partitions found on MTD device qcom_nand.0
[ 3.855177] Creating 22 MTD partitions on "qcom_nand.0":
[ 3.861967] 0x000000000000-0x000000100000 : "0:SBL1"
[ 3.869684] 0x000000100000-0x000000200000 : "0:MIBIB"
[ 3.874659] 0x000000200000-0x000000240000 : "0:BOOTCONFIG"
[ 3.878544] 0x000000240000-0x000000280000 : "0:BOOTCONFIG1"
[ 3.884084] 0x000000280000-0x000000480000 : "0:QSEE"
[ 3.891656] 0x000000480000-0x000000680000 : "0:QSEE_1"
[ 3.896826] 0x000000680000-0x000000780000 : "0:DEVCFG"
[ 3.900543] 0x000000780000-0x000000880000 : "0:DEVCFG_1"
[ 3.905742] 0x000000880000-0x000000980000 : "0:CDT"
[ 3.911144] 0x000000980000-0x000000a80000 : "0:CDT_1"
[ 3.915813] 0x000000a80000-0x000000b80000 : "ppinfo"
[ 3.921021] 0x000000b80000-0x000000e00000 : "0:APPSBL"
[ 3.927901] 0x000000e00000-0x000001080000 : "0:APPSBL_1"
[ 3.932851] 0x000001080000-0x000001280000 : "0:ART"
[ 3.937563] 0x000001280000-0x000001380000 : "0:TRAINING"
[ 3.941038] 0x000001380000-0x000001480000 : "u_env"
[ 3.946633] 0x000001480000-0x000001580000 : "s_env"
[ 3.951165] 0x000001580000-0x000001680000 : "devinfo"
[ 3.956093] 0x000001680000-0x000004880000 : "rootfs_1"
[ 4.021817] 0x000004880000-0x000007a80000 : "rootfs"
[ 4.084647] mtd: device 19 (rootfs) set to be root filesystem
[ 4.084999] mtdsplit: no squashfs found in "rootfs"
[ 4.089414] 0x000007a80000-0x000007c80000 : "sysdiag"
[ 4.097594] 0x000007c80000-0x00000fe80000 : "syscfg"
[ 4.261040] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 4.263312] libphy: Fixed MDIO Bus: probed
[ 4.487479] qca-mdio 88000.mdio: Could not find phy-reset-gpio
[ 4.487763] libphy: qca_mdio: probed
[ 4.492995] qca-mdio 88000.mdio: qca-mdio driver was registered
[ 4.936487] qca-mdio 90000.mdio: Could not find phy-reset-gpio
[ 4.936763] libphy: qca_mdio: probed
[ 4.941918] qca-mdio 90000.mdio: qca-mdio driver was registered
[ 5.055323] tun: Universal TUN/TAP device driver, 1.6
[ 5.055473] PPP generic driver version 2.4.2
[ 5.059475] PPP MPPE Compression module registered
[ 5.063753] NET: Registered protocol family 24
[ 5.068313] PPTP driver version 0.8.5
[ 5.073011] i2c /dev entries driver
[ 5.077515] qcom-tsens 4a9000.thermal-sensor: tsens device is not enabled
[ 5.081868] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[ 5.086872] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 800000 KHz
[ 5.126314] >>> Register 4 PWM-LEDs
[ 5.127278] sdhci: Secure Digital Host Controller Interface driver
[ 5.128597] sdhci: Copyright(c) Pierre Ossman
[ 5.134903] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.142775] remoteproc remoteproc0: cd00000.remoteproc is available
[ 5.146116] remoteproc remoteproc1: 4ab000.remoteproc_pd1 is available
[ 5.152031] remoteproc remoteproc2: cd00000.remoteproc:remoteproc_pd2 is available
[ 5.158722] remoteproc remoteproc3: cd00000.remoteproc:remoteproc_pd3 is available
[ 5.165969] coresight-tmc 6047000.tmc: failed to get flush cti, defer probe
[ 5.173058] coresight-dynamic-funnel 6041000.funnel: Uses obsolete Coresight DT bindings
[ 5.182571] coresight coresight-etm0: CPU0: ETM v4.0 initialized
[ 5.187892] coresight-etm4x 619c000.etm: CPU0: (null) initialized
[ 5.194469] coresight coresight-etm1: CPU1: ETM v4.0 initialized
[ 5.199871] coresight-etm4x 619d000.etm: CPU1: (null) initialized
[ 5.211678] coresight-stm 6002000.stm: coresight-stm : stm_register_device failed, probing deferred
[ 5.212152] OF: graph: no port node found in /soc/cti@6010000
[ 5.221164] OF: graph: no port node found in /soc/cti@6011000
[ 5.227054] OF: graph: no port node found in /soc/cti@6012000
[ 5.238107] OF: graph: no port node found in /soc/cti@6013000
[ 5.238369] OF: graph: no port node found in /soc/cti@6014000
[ 5.244288] OF: graph: no port node found in /soc/cti@6015000
[ 5.249918] OF: graph: no port node found in /soc/cti@6016000
[ 5.255696] OF: graph: no port node found in /soc/cti@6017000
[ 5.261355] OF: graph: no port node found in /soc/cti@6018000
[ 5.272524] OF: graph: no port node found in /soc/cti@6019000
[ 5.272785] OF: graph: no port node found in /soc/cti@601a000
[ 5.278484] OF: graph: no port node found in /soc/cti@601b000
[ 5.284398] OF: graph: no port node found in /soc/cti@601c000
[ 5.290008] OF: graph: no port node found in /soc/cti@601d000
[ 5.301155] OF: graph: no port node found in /soc/cti@601e000
[ 5.301426] OF: graph: no port node found in /soc/cti@601f000
[ 5.307323] OF: graph: no port node found in /soc/cti@6198000
[ 5.313000] OF: graph: no port node found in /soc/cti@6199000
[ 5.318666] OF: graph: no port node found in /soc/cti@610c000
[ 5.330819] OF: graph: no port node found in /soc/hwevent@6101000
[ 5.330854] coresight-hwevent 6101000.hwevent: No csr data
[ 5.336499] OF: graph: no port node found in /soc/csr@6001000
[ 5.341414] coresight-csr 6001000.csr: CSR initialized: coresight-csr
[ 5.348538] nf_conntrack_rtsp v0.7 loading
[ 5.353929] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 5.358082] gre: GRE over IPv4 demultiplexor driver
[ 5.363088] ip_gre: GRE over IPv4 tunneling driver
[ 5.369264] nf_nat_rtsp v0.7 loading
[ 5.373531] NET: Registered protocol family 10
[ 5.378219] Segment Routing with IPv6
[ 5.380970] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.385846] ip6_gre: GRE over IPv6 tunneling driver
[ 5.390740] NET: Registered protocol family 17
[ 5.395111] Bridge firewalling registered
[ 5.399940] l2tp_core: L2TP core driver, V2.0
[ 5.403604] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 5.407848] l2tp_netlink: L2TP netlink interface
[ 5.412672] 8021q: 802.1Q VLAN Support v1.8
[ 5.417583] Registering SWP/SWPB emulation handler
[ 5.421413] Loading compiled-in X.509 certificates
[ 5.441217] sps_register_bam_device: sps:BAM 0x06064000 is registered
[ 5.442684] coresight coresight-stm: STM32 initialized
[ 5.446994] ubi0: attaching mtd19
[ 5.755151] ubi0: scanning is finished
[ 5.762152] ubi0: attached mtd19 (name "rootfs", size 50 MiB)
[ 5.762179] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.766928] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.774503] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.780495] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
[ 5.792401] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 5.793520] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 728048624
[ 5.800550] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 40
[ 5.809550] ubi0: background thread "ubi_bgt0d" started, PID 79
[ 5.820302] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input0
[ 5.824834] hctosys: unable to open rtc device (rtc0)
[ 5.836549] VFS: Mounted root (squashfs filesystem) readonly on device 31:23.
[ 5.838711] Freeing unused kernel memory: 1024K
[ 5.877952] Run /sbin/init as init process
*********************************************************************************
_ _ __ _ __ _____ __ __ _____
| | | || \ | | / // ____]\ \ / // ____]TM
| | | || \ | | / /| (___ \ V /| (____
| | | || |\ \| |\ \ \____ \ \ / \____ \
| |_____ | || | \ | \ \ ____) | | | ____) |
|_______||_||_| \__| \_\[____ / |_| [_____/
(c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
Booting maple (firmware version 1.0.6.214447)
*********************************************************************************
[utopia][init] System Initialization
[utopia][init] Creating /proc
[utopia][init] Creating /sys
[utopia][init] Creating /dev
[utopia][init] Creating /tmp
[utopia][init] Allocating 100M for /tmp
[utopia][init] Prepairing /dev/pts
[utopia][init] Setting /tmp and /var permissions
[utopia][init] Starting udev..
Attempting mount of ubifs syscfg partition
UBI device number 1, total 1040 LEBs (132055040 bytes, 125.9 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[utopia][init] Using persistent syscfg data from /var/config/syscfg
[utopia][init] Starting system logging
[utopia][init] Starting sysevent subsystem
[utopia][init] Enabling DesignWare USB3 DRD Core drivers
[utopia][init] Loading QCA Ethernet, NSS and GMAC drivers
net.netfilter.nf_conntrack_acct = 1
net.netfilter.nf_conntrack_helper = 1
[utopia][init] Late loading usb drivers
[utopia][init] Setting any unset system values to default
[utopia][init] no persistence config file (/var/config/pstcfg) found
setting up MAC addresses for all interface based on 80:69:1A:8B:87:67
NTP Servers do not need to be updated
[utopia][init] syscfg loaded removing tmp file
checking for interactive script start up...
no user scheduled tasks found...
senq running
/etc/init.d/service_senq.sh Starting in mode 0
1970-01-01 00:00:19: node-mode running
Updating BootCount Page[33]:10800 ... Done
[utopia][init] Setup link to WiFi firmware and board data (EU)
[utopia][init] Multi-region is not supported or not enabled
[utopia][init] Cert region: EU
lrwxrwxrwx 1 root root 12 Nov 15 2023 IPQ5018 -> /tmp/IPQ5018
-rw-r--r-- 1 root root 3931 Nov 15 2023 firmware_rdp_feature.ini
drwxr-xr-x 2 root root 3 Nov 15 2023 qca
-rw-r--r-- 1 root root 785404 Nov 15 2023 qca-nss0.bin
lrwxrwxrwx 1 root root 12 Nov 15 2023 qcn6122 -> /tmp/qcn6122
[utopia][init] Using EU region for WiFi firmware and board data
[utopia][init] Load WiFi cal data from MTD(mtd13) to FS.
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.762880 seconds, 167.8KB/s
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.777777 seconds, 164.6KB/s
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.778480 seconds, 164.4KB/s
[utopia][init] Loading WLAN drivers
[utopia][init] Loading QCA Enhanced Connection manager
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
dev.nss.general.redirect = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
[utopia][init] Inserting fpbypass.ko for QCA
[utopia][init] Initializing BTLE interface
[utopia][init] Bluetooth Mac Address: 80 69 1A 8B 87 67
[utopia][init] Cert Region: EU
16+0 records in
16+0 records out
16 bytes (16B) copied, 0.000333 seconds, 46.9KB/s
6+0 records in
6+0 records out
6 bytes (6B) copied, 0.000171 seconds, 34.3KB/s
2685+0 records in
2685+0 records out
2685 bytes (2.6KB) copied, 0.014236 seconds, 184.2KB/s
adding group for lldpd user
[utopia][init] Apply EEE settings, result = 0
[utopia][init] phy link watchdog started
(none) login: Wed Oct 26 00:00:00 UTC 2022
Starting devicedb ...
wan, sysevent received: wan-start
DeviceDB database version 3
Options:
Daemonize : yes
Server UDS Path : /tmp/devicedb/server_link
Database File : /tmp/devicedb/devicedb.db
DB Transient File : /tmp/devicedb/transient.db
DeviceDB Daily Backup Cron job created
lldpd event lan_ipaddr 192.168.1.1 received.
No TopoDB persistence data to import
TopoDB data not imported
killall: lldpd: no process killed
lldpd event lldpd-start received.
lldpd configuration already running
setting root_accessible to 0 by default
mosquitto aborting: not Master
lldp updating callback scripts
service_guardian.sh is called with lan-status
ping6: sendto: Network unreachable
ARP agent not started: not in master mode.
ftntsdns service_init
checking for ftntsdns record
nameserver1 does not contain ftntsdns record, backing up current DNS
Starting ddd_ethernet_agent ...
RTNETLINK answers: Resource busy
killall: sdns_filter: no process killed
iptables: No chain/target/match by that name.
killall: sdns_filter: no process killed
Lighttpd Model Base: MX62
Generating Rainier lighttpd config
Build temporary www configuration directory:
$5$jLtbrs217qUHX1kp$/W7WTVvXNiAigOkvPwKV26EjVq3qIqrnU0NmtAorEnA
iptables: No chain/target/match by that name.
nss_build_bypass is called with lan-started
[utopia] Not setting ppp_clamp_mtu
Power cycle Ethernet ports.
Registering Service myrouter._http._tcp.local port 80
wifi, sysevent received: lan-started (Tue Oct 25 17:00:13 PDT 2022)
ping6: sendto: Network unreachable
wifi, service_start()
ARP agent not started: not in master mode.
Got a reply for myrouter._http._tcp.local.: Name now registered and active
[utopia][init] Loading GMAC and WLAN drivers
lldpd event lldp::root_accessible 0 received.
backhaul_switching status event backhaul::media 0 received on backhaul_switching_mgr
Backhaul media 0 received, but wifi status is not started. Will do backhaul check later
Multi-region is not supported or not enabled
SKU is MX62-EU
mosquitto aborting: not Master
service_guardian.sh is called with lan-status
Not ready for JNAP. Sleeping for 15 seconds...
smart connect client, generating client device data
backhaul_switching status event system_state-normal received
ping6: sendto: Network unreachable
lldpd event ETH::port_1_status down received.
lldpd event ETH::port_2_status down received.
[utopia] Not setting ppp_clamp_mtu on dslite protocol
nss_build_bypass is called with ipv4_wan_ipaddr
getting geoip information for 0.0.0.0
lldpd event ipv4_wan_ipaddr 0.0.0.0 received.
curl: (6) Could not resolve: freegeoip.net (Could not contact DNS servers)
wifi, wifi_physical_start(ath0)
killall: mdns_lookup: no process killed
dev.nss.n2hcfg.n2h_queue_limit_core0 = 256
smart_connect, sysevent received: wifi-status starting
LookUpMaster call OK.
mDNS lookup is on going...
ath0 No such device
creating vap ath0
fastpath, sysevent received: qos_enabled
nss_build_bypass is called with guardian-configured
dev.nss.general.redirect = 0
net.bridge.bridge-nf-call-ip6tables = 0
configurator: got event(guardian-configured, )
net.bridge.bridge-nf-call-iptables = 0
wan, sysevent received: phylink_wan_state
btsetup phylink_wan_state
Auto channel
wifi, wifi_virtual_start(ath0)
Restarting nfqrecv service...
wifi, smart::mode is unconfigured do not start smart connect setup and config wifi
wifi, wifi_user_start(ath0)
configurator: got event(wan-status, starting)
killall: sdns_filter: no process killed
OK
configurator: got event(firewall-status, starting)
configurator: got event(firewall-status, started)
Got a TERM signal, will terminate.
Warning! nfqrecv encountered errors when doing recv(): Interrupted system call
iptables: No chain/target/match by that name.
wifi, primary AP: ath0 is up (Tue Oct 25 17:00:44 PDT 2022)
killall: nfqrecv: no process killed
subscriber running
/etc/init.d/service_subscriber.sh subscriber-stop NULL MODE: 0
wifi, wifi_guest_start(ath0)
wifi, guest ath2 is disabled, do not start wifi guest
wifi, wifi_physical_start(ath10)
killall: sdns_filter: no process killed
killall: omsgd: no process killed
killall: configure_me_monitor.sh: no process killed
rm: can't remove '/var/run/configure_me_monitor.sh.pid': No such file or directory
configurator: got event(nfqrecv-status, stopped)
iptables: No chain/target/match by that name.
configurator: got event(nfqrecv-status, started)
configurator: got event(firewall-status, starting)
dev.nss.n2hcfg.n2h_queue_limit_core0 = 256
ath10 No such device
creating vap ath10
List Flushed
Following channels are blocked from Channel selection algorithm
[52] [56] [60] [64] [116] [120] [124] [128]
configurator: got event(firewall-status, started)
killall: sdns_filter: no process killed
Auto channel
iptables: No chain/target/match by that name.
wifi, wifi_virtual_start(ath10)
wifi, wifi_user_start(ath10)
OK
wifi, primary AP: ath10 is up (Tue Oct 25 17:00:52 PDT 2022)
wifi, wifi_guest_start(ath10)
wifi, guest ath12 is disabled, do not start wifi guest
wifi, wifi_physical_start(ath30)
Set 6G MAC 80:69:1A:8B:87:6B
dev.nss.n2hcfg.n2h_queue_limit_core0 = 256
ath30 No such device
creating vap ath30
List Flushed
Error received: -22
Could not send NL command
Following channels are blocked from Channel selection algorithm
-band 3[233]
Auto channel
wifi, wifi_virtual_start(ath30)
wifi, wifi_user_start(ath30)
OK
wifi, primary AP: ath30 is up (Tue Oct 25 17:00:56 PDT 2022)
wifi, wifi_guest_start(ath30)
wifi, guest ath32 is disabled, do not start wifi guest
start mcsd succeeded (Tue Oct 25 17:00:56 PDT 2022)
17.00.56.225804 MCSD plugin info : Initializing plugin manager
btsetup smart_connect::setup_status
state_machine entering READY
btsetup: Unconfigured mode and Peripheral role
dev.nss.n2hcfg.n2h_high_water_core0 = 8704
---wifi-status started---
dev.nss.n2hcfg.extra_pbuf_core0 = 10000000
Enter do_btsetup_central_thread
Enter do_btsetup_tx_thread
dev.nss.n2hcfg.n2h_high_water_core0 = 72512
dev.nss.n2hcfg.n2h_wifi_pool_buf = 36864
pub_devinfo_status: Error: could not determine HOST_ADDR
0x02 0x01 0x06 0x08 0x09 0x4C 0x69 0x6E 0x6B 0x73 0x79 0x73
0x05 0xFF 0xEE 0x0B 0x00 0x00 0x11 0x07 0xD1 0x6F 0x01 0x40 0x94 0x0E 0x88 0xB7 0xC2 0x46 0xAB 0x8E 0x80 0x20 0x00 0x00
smart_connect, sysevent received: wifi-status started
pub_wlan_status: Error: could not determine HOST_ADDR
[olympus][wifi] update wl1_txpower_list 0 8 11 14 17 20 23 26
configurator: got event(firewall-status, starting)
configurator: got event(firewall-status, started)
[olympus][wifi] update wl3_txpower_list 0 8 10 12 14 16 18 20
ath20 no frequency information.
sh: out of range
killall: sdns_filter: no process killed
iptables: No chain/target/match by that name.
[fw.sh] fwup_checked_after_boot: 0
[fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0
[fw.sh] fwup_checked_after_boot: 0
[fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0
[fw.sh] fwup_checked_after_boot: 0
[fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0
[fw.sh] fwup_checked_after_boot: 0
[fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0