OpenWRT Router mit Wireguard Serverhinter FritzBox 7490AX m

Installing and Using OpenWrt
1

Hallo,
habe ein Problem und ich hoffe ihr könnt mir helfen, ich habe ein OpenWRT Router hinter meiner Fritzbox, auf dem OpenWRT läuft ein Wireguard Server das funktioniert auch alles soweit, die Klienten die mit Wireguard Server verbunden haben auch eine andere Adresse und Standort, mein Problem ist ich kann mich nicht mit einer DynDns Adresse zum Router verbinden um auf mein NAS zu kommen, wie muss das konfiguriert werden damit es klappt.

Internet--- Fritzbox7590AX (Hauptrouter) --- OpenWRT Router mit Wireguard Server

2

The preferred language of the OpenWrt forums is English, as this helps maximize the number of people who can participate in the conversation. Accordingly, please be sure to post in English.

You may use an online translator, and you're welcome to also include your native language in addition to English.

Thank you.

3

Cannot help much with forwarding wireguard port via fritzbox. Zero change on OpenWRT needed.

4

Ok,

I have a problem and I hope you can help me. I have an OpenWRT router behind my Fritzbox. A Wireguard server is running on the OpenWRT, and everything is working fine. The clients connected to the Wireguard server also have a different address and location. My problem is, I can't connect to the router with a DynDNS address to access my NAS. How do I configure this to work?

Internet --- Fritzbox 7590AX (main router) --- OpenWRT router with Wireguard server

5

AFAIK, the Fritz! support Wireguard natively, so there is no need to do this on OpenWrt.

If you want to run it on OpenWrt, you have to configure port-forwarding on the Fritz!. This is, however, out of scope of this forum, as others have already pointed out.

2 Likes
6

Yes, the FritzBox supports Wireguard, but then my telephony no longer works.

8

Why is that? Are you referring to the telephony features of the Fritz! or "something else"?

1 Like
9

Yes, the telephony function of Telekom

10

I just had a look at this thread and the problem is that the fritz routes the VoIP traffic over the tunnel which makes it stop working.

Do you want to route all Internet traffic over the VPN or is it just to securely dial in?

If it's the latter, it should still work on the Fritz if configured properly. Otherwise you need to get port forwarding working correctly and let OpenWrt do the Wireguard work.