OpenWrt on Tenda O9 CPE

hello, i want to install openwrt on tenda o9 CPE, is it supported?

Telnet is enabled on the device, tftp is installed and accessible

Soc:QCA9563-AL3A + QCA8334-AL3C + QCA....

I have made a backup through telnet, here is the log:

--- ping statistics ---
mtd3: 00770000 00010000 "KernelFS"
mtd4: 00676789 00010000 "RootFS"
mtd5: 00010000 00010000 "CFM"
mtd6: 00010000 00010000 "CFM_BACKUP"
mtd7: 00010000 00010000 "CFG"
mtd8: 00010000 00010000 "art"
mtd9: 00800000 00010000 "ALL"
mtd10: 00010000 00001000 "spi0.1"
/tmp # dd if=/dev/mtd9 of=/tmp/ALL.backup
16384+0 records in
16384+0 records out
8388608 bytes (8.0MB) copied, 5.152885 seconds, 1.6MB/s

Is there any compatible other model firmware to use? thanks

Only Tenda AC9 is supported.

I know thats on the table of hardware. but my question is since the router is very similiar to TP-link CPE710 can i install Tp-link's openwrt firmware on tenda without bricking it?

no, you can't.

1 Like