Hello,
I'm running an Openwrt 17.01.5 guest x64 rootfs-ext4 on Qemu. My host is Ubuntu 18.10 (Cosmic Cuttlefish). With the following script to boot Openwrt:
qemu-system-i386 -name wrt-qemu \
-nographic \
-drive file=/virt/openwrt_i386.img,if=none,id=drive-virtio0,format=raw,cache.direct=on \
-device virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=300 \
-nic user,id=n2 \
-netdev bridge,id=n0,br=br0 -device virtio-net,mac=52:54:00:12:34:ee,netdev=n0 \
But every time I reboot all files I've modified or created are being deleted. As if my fs is read only. I tried sync each time I change something but it's not working.
Here is the dmesg output at boot:
[ 0.000000] Linux version 4.4.140 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3103-1b51a49) ) #0 SMP Fri Jul 13 19:25:14 2018
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000007fddfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000007fde000-0x0000000007ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] e820: last_pfn = 0x7fde max_arch_pfn = 0x1000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f5d10-0x000f5d1f] mapped at [c00f5d10]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5B30 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x0000000007FE157C 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x0000000007FE1458 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x0000000007FE0040 001418 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x0000000007FE0000 000040
[ 0.000000] ACPI: APIC 0x0000000007FE14CC 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x0000000007FE1544 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 127MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 07fde000
[ 0.000000] low ram: 0 - 07fde000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000007fddfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000007fddfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000007fddfff]
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x08000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @c7ec9000 s43404 r0 d30324 u73728
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32380
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=ef8282ed-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,38400n8 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 118824K/130544K available (7203K kernel code, 357K rwdata, 1848K rodata, 532K init, 364K bss, 11720K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff66000 - 0xfffff000 ( 612 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xc87de000 - 0xffbfe000 ( 884 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc7fde000 ( 127 MB)
[ 0.000000] .init : 0xc1934000 - 0xc19b9000 ( 532 kB)
[ 0.000000] .data : 0xc17090a6 - 0xc1932580 (2213 kB)
[ 0.000000] .text : 0xc1000000 - 0xc17090a6 (7204 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2808.015 MHz processor
[ 0.020313] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.03 BogoMIPS (lpj=28080150)
[ 0.021070] pid_max: default: 32768 minimum: 301
[ 0.021624] ACPI: Core revision 20150930
[ 0.035135] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.036199] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.036511] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.044556] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.044935] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.045422] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
[ 0.045690] Spectre V2 : Filling RSB on context switch
[ 0.103874] Freeing SMP alternatives memory: 24K
[ 0.116517] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.119312] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.230000] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[ 0.230000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.230000] Failed to access perfctr msr (MSR c2 is 0)
[ 0.230000] x86: Booted up 1 node, 1 CPUs
[ 0.230000] smpboot: Total of 1 processors activated (5616.03 BogoMIPS)
[ 0.235173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.235799] futex hash table entries: 256 (order: 3, 32768 bytes)
[ 0.242885] pinctrl core: initialized pinctrl subsystem
[ 0.248671] NET: Registered protocol family 16
[ 0.253159] cpuidle: using governor ladder
[ 0.253545] cpuidle: using governor menu
[ 0.254253] ACPI: bus type PCI registered
[ 0.256407] PCI: PCI BIOS revision 2.10 entry at 0xfd1ca, last bus=0
[ 0.256793] PCI: Using configuration type 1 for base access
[ 0.306149] ACPI: Added _OSI(Module Device)
[ 0.306441] ACPI: Added _OSI(Processor Device)
[ 0.306668] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.306853] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.322776] ACPI: Interpreter enabled
[ 0.323416] ACPI: (supports S0 S5)
[ 0.323642] ACPI: Using IOAPIC for interrupt routing
[ 0.324240] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.352289] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.352938] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.353351] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.353876] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.356216] PCI host bridge to bus 0000:00
[ 0.356683] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.357007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.357288] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.357582] pci_bus 0000:00: root bus resource [mem 0x08000000-0xfebfffff window]
[ 0.357876] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.358337] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.365411] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.365751] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.366083] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.366412] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.367680] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.368062] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.397885] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.400893] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.401699] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.402728] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.403354] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.405665] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.407689] SCSI subsystem initialized
[ 0.416483] ACPI: bus type USB registered
[ 0.417032] usbcore: registered new interface driver usbfs
[ 0.417591] usbcore: registered new interface driver hub
[ 0.418085] usbcore: registered new device driver usb
[ 0.419312] PCI: Using ACPI for IRQ routing
[ 0.427032] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.427586] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.427941] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.435394] amd_nb: Cannot enumerate AMD northbridges
[ 0.436612] clocksource: Switched to clocksource hpet
[ 0.438968] pnp: PnP ACPI init
[ 0.438968] pnp: PnP ACPI: found 6 devices
[ 0.485300] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.486650] NET: Registered protocol family 2
[ 0.490691] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.491172] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.491495] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.492224] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.492552] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.493731] NET: Registered protocol family 1
[ 0.494223] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.494570] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.495018] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.507413] kvm: no hardware support
[ 0.507645] has_svm: not amd
[ 0.507783] kvm: no hardware support
[ 0.510925] NatSemi SCx200 Driver
[ 0.559253] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.567121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.567611] io scheduler noop registered
[ 0.567810] io scheduler deadline registered (default)
[ 0.573564] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.574302] ACPI: Power Button [PWRF]
[ 0.579434] isapnp: Scanning for PnP cards...
[ 0.936146] isapnp: No Plug & Play device found
[ 1.076833] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.207179] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.208455] xenfs: not registering filesystem on non-xen platform
[ 1.209852] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.232833] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.240226] Non-volatile memory driver v1.3
[ 1.240731] Linux agpgart interface v0.103
[ 1.241518] [drm] Initialized drm 1.1.0 20060810
[ 1.241895] [drm] radeon kernel modesetting enabled.
[ 1.242338] [drm] amdgpu kernel modesetting enabled.
[ 1.248972] [drm] Found bochs VGA, ID 0xb0c0.
[ 1.249326] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebb0000.
[ 1.250870] [TTM] Zone kernel: Available graphics memory: 59424 kiB
[ 1.251148] [TTM] Initializing pool allocator
[ 1.251432] [TTM] Initializing DMA pool allocator
[ 1.268247] fbcon: bochsdrmfb (fb0) is primary device
[ 1.297592] Console: switching to colour frame buffer device 128x48
[ 1.310536] bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
[ 1.311034] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.324190] loop: module loaded
[ 1.342727] vda: vda1 vda2
[ 1.355255] scsi host0: ata_piix
[ 1.356671] scsi host1: ata_piix
[ 1.357366] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 1.357772] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 1.365556] Fusion MPT base driver 3.04.20
[ 1.365892] Copyright (c) 1999-2008 LSI Corporation
[ 1.366497] Fusion MPT SPI Host driver 3.04.20
[ 1.367434] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.367887] ehci-pci: EHCI PCI platform driver
[ 1.368344] ehci-platform: EHCI generic platform driver
[ 1.368780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.369240] ohci-platform: OHCI generic platform driver
[ 1.369750] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.370698] usbcore: registered new interface driver usb-storage
[ 1.371770] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.374426] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.374910] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.375859] mousedev: PS/2 mouse device common for all mice
[ 1.382312] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.392650] rtc_cmos 00:00: RTC can wake from S4
[ 1.399095] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.403687] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 1.407538] sdhci: Secure Digital Host Controller Interface driver
[ 1.411659] sdhci: Copyright(c) Pierre Ossman
[ 1.416374] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.422485] NET: Registered protocol family 10
[ 1.435269] NET: Registered protocol family 17
[ 1.439588] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.448096] 8021q: 802.1Q VLAN Support v1.8
[ 1.452757] mce: Unable to init device /dev/mcelog (rc: -5)
[ 1.457833] Using IPI No-Shortcut mode
[ 1.464397] registered taskstats version 1
[ 1.473321] rtc_cmos 00:00: setting system clock to 2018-12-05 14:22:31 UTC (1544019751)
[ 1.500961] tsc: Refined TSC clocksource calibration: 2807.998 MHz
[ 1.509008] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c456dd4, max_idle_ns: 440795285767 ns
[ 1.544256] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.550771] ata2.00: configured for MWDMA2
[ 1.563142] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.582266] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.590601] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.833808] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 1.898589] EXT4-fs (vda2): mounted filesystem without journal. Opts: (null)
[ 1.913707] VFS: Mounted root (ext4 filesystem) readonly on device 254:2.
[ 1.930046] Freeing unused kernel memory: 532K
[ 2.086784] init: Console is alive
[ 2.227590] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.253632] pps_core: LinuxPPS API ver. 1 registered
[ 2.259754] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.268964] PTP clock support registered
[ 2.282704] Button Hotplug driver version 0.4.1
[ 2.290918] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.302596] init: - preinit -
[ 2.477937] random: jshn: uninitialized urandom read (4 bytes read, 5 bits of entropy available)
[ 2.517531] clocksource: Switched to clocksource tsc
[ 2.542778] random: jshn: uninitialized urandom read (4 bytes read, 5 bits of entropy available)
[ 2.572749] random: jshn: uninitialized urandom read (4 bytes read, 5 bits of entropy available)
[ 2.624655] random: jshn: uninitialized urandom read (4 bytes read, 5 bits of entropy available)
[ 2.651449] random: jshn: uninitialized urandom read (4 bytes read, 5 bits of entropy available)
[ 2.693674] random: jshn: uninitialized urandom read (4 bytes read, 5 bits of entropy available)
[ 2.789953] 8021q: adding VLAN 0 to HW filter on device eth0
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.075519] random: jshn: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
WARNING: Variable 'led' does not exist or is not an array/object
[ 6.109191] mount_root: mounting /dev/root
[ 6.117285] EXT4-fs (vda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 6.129317] EXT4-fs error (device vda2): ext4_has_uninit_itable:2883: comm mount_root: Inode table for bg 0 marked as needing zeroing
[ 6.145306] EXT4-fs (vda2): Remounting filesystem read-only
[ 6.159533] EXT4-fs (vda2): re-mounted. Opts: (null)
[ 6.392237] EXT4-fs (vda1): mounted filesystem without journal. Opts: (null)
[ 6.431410] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 6.521751] procd: - early -
[ 7.162542] procd: - ubus -
[ 7.191874] random: ubusd: uninitialized urandom read (4 bytes read, 9 bits of entropy available)
[ 7.224493] random: ubusd: uninitialized urandom read (4 bytes read, 9 bits of entropy available)
[ 7.234667] random: ubusd: uninitialized urandom read (4 bytes read, 9 bits of entropy available)
[ 7.245628] procd: - init -
Please press Enter to activate this console.
[ 7.461080] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.474026] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 7.474026] originally by Donald Becker <becker@scyld.com>
[ 7.474026] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 7.498890] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 7.505420] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 7.658828] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 7.982565] e1000 0000:00:03.0 eth1: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[ 7.993150] e1000 0000:00:03.0 eth1: Intel(R) PRO/1000 Network Connection
[ 8.073203] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.110729] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 8.149586] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 8.155619] e100: Copyright(c) 1999-2006 Intel Corporation
[ 8.172967] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.184432] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[ 8.213250] nf_conntrack version 0.5.0 (1865 buckets, 7460 max)
[ 8.272325] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 8.291692] sis900.c: v1.08.10 Apr. 2 2006
[ 8.301254] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 8.334638] xt_time: kernel timezone is -0000
[ 8.350562] PPP generic driver version 2.4.2
[ 8.365136] NET: Registered protocol family 24
[ 8.375989] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 13.054395] 8021q: adding VLAN 0 to HW filter on device eth0
[ 13.145403] device eth0 entered promiscuous mode
[ 13.201824] br-lan: port 1(eth0) entered forwarding state
[ 13.208208] br-lan: port 1(eth0) entered forwarding state
[ 13.425750] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 13.431608] 8021q: adding VLAN 0 to HW filter on device eth1
[ 13.438331] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 13.492446] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 15.200594] br-lan: port 1(eth0) entered forwarding state
Down below when I use halt to shut down openwrt:
root@LEDE:/# halt
root@LEDE:/# [ 45.588426] br-lan: port 1(eth0) entered disabled state
[ 45.623185] device eth0 left promiscuous mode
[ 45.629375] br-lan: port 1(eth0) entered disabled state
[ 45.646853] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 47.114615] EXT4-fs error (device vda2): ext4_remount:4797: Abort forced by user
[ 47.122462] EXT4-fs (vda2): Remounting filesystem read-only
[ 47.152607] EXT4-fs (vda2): re-mounted. Opts: (null)
[ 50.327963] ACPI: Preparing to enter system sleep state S5
[ 50.333996] reboot: Power down
Thanks.