OpenWrt on Cudy WR3000

Installing and Using OpenWrt
1

I recently got a Cudy WR3000 to use as an access point with fast roaming. Currently I use a Dlink DIR-3040 with openwrt and it works very well.

With the new Cudy, wifi interfaces get disabled randomly. Even though the hardware has no 6 Ghz support, the 5 Ghz interface comes up like below in the 6 Ghz band!

Channel: 116 (6.530 GHz)
Tx-Power: 23 dBm
Signal: 0 dBm | Noise: -92 dBm
Bitrate: 0.0 Mbit/s | Country: CA

I was wondering if I am missing something. Thanks.

2

DFS scan ?

1 Like
3

Looks like it. I switched 36 and now it is up and running.

Channel: 36 (5.180 GHz)
Tx-Power: 23 dBm
Signal: -74 dBm | Noise: -92 dBm
Bitrate: 54.0 Mbit/s | Country: CA
Fast roaming is also working. But for some reason, all connections are stuck at 20 Mhz width. Not going to 80. Thanks.

1 Like