OpenWrt FritzBox 7362SL

What version have not worked for you before you tried snapshot? Have you used/tried this release? https://downloads.openwrt.org/releases/22.03.0-rc4/targets/lantiq/xrx200/openwrt-22.03.0-rc4-lantiq-xrx200-avm_fritz7362sl-squashfs-sysupgrade.bin
This should be the most simple version to start from at the current release state.

I have tried many versions ... I will try your link and tell you if it works ...

This dont work for me, the BootLoader:
https://downloads.openwrt.org/releases/21.02.3/targets/lantiq/xrx200/openwrt-21.02.3-lantiq-xrx200-avm_fritz7362sl-initramfs-kernel.bin

After installing I cant connect to ssh. A nmap says hot ist down.

Strange, because exactly same version worked fine for this person: No dsl connection with Fritz!Box 7362 SL - #7 by RSX7
After the installation of this version you have luci preinstalled at least. And dont forget to delete the settings when installing it or reset the settings after installation.

And because you are also on a ADSL line like the other person, this could matter for you: No dsl connection with Fritz!Box 7362 SL - #8 by godraselti

here the errors:

root@(none):~# cd /tmp/
root@(none):/tmp# sysupgrade openwrt-22.03.0-rc4-lantiq-xrx200-avm_fritz7362sl-squashfs-sysupgrade.bin 
Device avm,fritz7362sl not supported by this image
Supported devices: avm,fritz7362sl - Image version mismatch: image 1.1, device 1.0. Please wipe config during upgrade (force required) or reinstall. Reason: Config cannot be migrated from swconfig to DSA
Image check failed.
root@(none):/tmp# 

@godraselti
Is the DSL now working for him?
https://forum.openwrt.org/t/no-dsl-connection-with-fritz-box-7362-sl/130683/6

I have downloaded the firmware files and will try it...

sysupgrade -F -n openwrt-22.03.0-rc4-lantiq-xrx200-avm_fritz7362sl-squashfs-sysupgrade.bin
Or just -F and later in luci reset the config.

okay, i was doing the steps ... sysupgrade works fine with your trick. I have copied the DSL firmware to /lib/firmware and set the right path to it ... But No DSL support.
I think, the modem chipset is not suupported by openwrt. thats sad :frowning:

root@OpenWrt:/lib/firmware# ls -l
-rw-r--r--    1 root     root          1088 Jun 10 07:20 ath9k-eeprom-pci-0000:01:00.0.bin
lrwxrwxrwx    1 root     root            43 Jun 10 07:20 lantiq-vrx200-a-to-b.bspatch -> xcpe_581816_580B11_to_579906_574402.bspatch
lrwxrwxrwx    1 root     root            22 Jun 10 07:20 lantiq-vrx200-a.bin -> xcpe_581816_580B11.bin
-rw-r--r--    1 root     root          4316 Jun 10 07:20 regulatory.db
-rw-r--r--    1 root     root        908888 Jun 10 07:27 vr9-B-dsl_s6QpaNxxn0BCugT.bin
-rw-r--r--    1 root     root          1920 Jun 10 07:20 xcpe_581816_580B11.LICENSE
-rw-r--r--    1 root     root        898952 Jun 10 07:20 xcpe_581816_580B11.bin
-rw-r--r--    1 root     root        253635 Jun 10 07:20 xcpe_581816_580B11_to_579906_574402.bspatch

Its better do delete it from the wiki page, isnt it? Cause the wiki says, its supported ...

Well, are we sure yet that the device does not work at all? What I see is two recent reports of having issues with 1&1 over ADSL, but the device might work just fine with VDSL2.

Here is a link to the most recent fb7362sl firmware blob (follow at own risk):
https://fastupload.io/w6dcTS7QarMvurm

ah, you have a fritzbox 7362SL, too? with VDSL?

I have started my box, over 200 times today :wink: and flash images ...
OK, i will try a last time ... by the way, thx for helping me ...

I think its better to buy a router, thats supported FULL openwrt, with WLAN/DSL/USB-storage and FULL iptables.

No, I do not. This is why I said "might work just fine with VDSL2" and nothing more definitive :wink:

The problem is there are only few router models that support DSL under OpenWrt and most of these are pretty old by now. Personally, I tried an FB7490 equivalent (BT HomeHub5A) as all-i-one router under OpenWrt and found it to be lacking even at 50/10 DSL speed. So I opted for operating the HH5A as bridged modem in front of a beefier router.

Not sure what your iptables issue is, but as far as I can tell iptables is spilt into a number of packages and depending on one's needs one needs to install the correct set of packages...

But I guess first goal needs to be getting on-line at all before wondering about additional packages.

Bro, it works !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thank u very very much !!!

https://i.postimg.cc/DZp41Ccs/2022-26-Jun-22-00-25.png

Post your working /etc/config/network, could be good for future reference.

Remove any password etc.

1 Like

This is super odd, according to whois that IPv4 address belongs to arcor/vodafone

Summary
user@ubuntu:~$ whois 88.76.XXX.XXX
% This is the RIPE Database query service.
% The objects are in RPSL format.
%
% The RIPE Database is subject to Terms and Conditions.
% See http://www.ripe.net/db/support/db-terms-conditions.pdf

% Note: this output has been filtered.
%       To receive output for a database update, use the "-B" flag.

% Information related to '88.76.0.0 - 88.77.95.255'

% Abuse contact for '88.76.0.0 - 88.77.95.255' is 'abuse.de@vodafone.com'

inetnum:        88.76.0.0 - 88.77.95.255
netname:        ARCOR-DSL-NET15
descr:          ARCOR AG
descr:          Alfred-Herrhausen-Allee 1
descr:          D-65760 Eschborn
country:        DE
admin-c:        ANOC1-RIPE
tech-c:         ANOC1-RIPE
mnt-by:         ARCOR-MNT
mnt-lower:      ARCOR-MNT
mnt-routes:     ARCOR-MNT
status:         ASSIGNED PA
created:        2006-02-17T10:36:32Z
last-modified:  2007-07-23T07:54:14Z
source:         RIPE

role:           Vodafone Germany IP Core Backbone
address:        Vodafone GmbH
address:        Campus Eschborn
address:        Duesseldorfer Strasse 15
address:        D-65760 Eschborn
address:        Germany
phone:          +49 6196 523 0864
remarks:        trouble: Security issues abuse.de@vodafone.com
remarks:        trouble: Information http://www.vodafone.de
remarks:        trouble: Peering contact peering@adm.arcor.net
remarks:        trouble: Operational issues :
remarks:        DanubiusNOC-DE-FO-FIXED_ro@vodafone.com
remarks:        trouble: Address assignment ip-registry@arcor.net
admin-c:        SM9000-RIPE
admin-c:        NH4266-RIPE
admin-c:        JS19072-RIPE
admin-c:        IE1226-RIPE
admin-c:        TK11590-RIPE
admin-c:        MW877-RIPE
admin-c:        FB3293-RIPE
admin-c:        TG2269-RIPE
tech-c:         NH15-RIPE
nic-hdl:        ANOC1-RIPE
mnt-by:         ARCOR-MNT
created:        2002-07-11T08:48:33Z
last-modified:  2021-07-15T06:28:08Z
source:         RIPE # Filtered
abuse-mailbox:  abuse.de@vodafone.com

% Information related to '88.76.0.0/15AS3209'

route:          88.76.0.0/15
descr:          ARCOR-IP
origin:         AS3209
mnt-by:         ARCOR-MNT
created:        2009-05-18T07:34:14Z
last-modified:  2009-05-18T07:34:14Z
source:         RIPE

% This query was served by the RIPE Database Query Service version 1.103 (HEREFORD)

Didn't you say you were a 1&1 customer?

yes, iam ... the DSL cabel owns arcor... but 1und1 use that ...

1 Like