OpenWrt Firmware Selector not accepting Script to run on first boot for Mesh11sd

root@OpenWrt:~# mesh11sd status
awk: cmd. line:1: (FILENAME=- FNR=2) fatal: not enough arguments to satisfy format string
        `%s phy1-ap1'
         ^ ran out for this one
{
  "setup":{
    "version":"4.1.1",
    "enabled":"1",
    "procd_status":"running",
    "portal_detect":"1",
    "portal_detect_threshold":"0",
    "portal_channel":"default",
    "channel_tracking_checkinterval":"30",
    "mesh_basename":"m-11s-",
    "auto_config":"1",
    "auto_mesh_network":"lan",
    "auto_mesh_band":"2g40",
    "auto_mesh_id":"92d490daf46cfe534c56ddd669297e",
    "mesh_gate_enable":"1",
    "mesh_leechmode_enable":"0",
    "mesh_gate_encryption":"0",
awk: cmd. line:1: (FILENAME=- FNR=2) fatal: not enough arguments to satisfy format string
        `%s phy1-ap1'
         ^ ran out for this one
    "txpower":"",
    "mesh_path_cost":"10",
    "mesh_path_stabilisation":"1",
    "checkinterval":"10",
    "interface_timeout":"10",
    "ssid_suffix_enable":"1",
    "debuglevel":"1"
  },
  "interfaces":{
  }
}
root@OpenWrt:~#

hi
i has error i do'nt know why