OpenWrt firmware image for Pine64/Rock64 (RK3328) SBC

Installing and Using OpenWrt
1

Greetings,
I have a Pine64/ROCK64 (RK3328) SBC (1GB RAM version)

https://pine64.com/product/rock64-2gb-single-board-computer/

I was wondering if the Pine64/ROCK64 firmware image (link below) is the right one for the board.

https://mirror-03.infra.openwrt.org/releases/24.10.0-rc5/targets/rockchip/armv8/openwrt-24.10.0-rc5-rockchip-armv8-pine64_rockpro64-ext4-sysupgrade.img.gz

Thanks

2

Yes, that looks like the correct one for that device. See below. Or you could also use the squashfs one, which might use less disk space once it's all installed.

1 Like
3

Don't believe this is correct as the RockPro64 is a different device than the Rock64. RockPro is RK3399 and the Rock is RK3328. The correct link for the rock64 is https://downloads.openwrt.org/releases/24.10.0-rc5/targets/rockchip/armv8/openwrt-24.10.0-rc5-rockchip-armv8-pine64_rock64-squashfs-sysupgrade.img.gz. Or for the mirror https://mirror-03.infra.openwrt.org/releases/24.10.0-rc5/targets/rockchip/armv8/openwrt-24.10.0-rc5-rockchip-armv8-pine64_rock64-ext4-sysupgrade.img.gz

2 Likes
4

Oops, you are correct! I totally missed the "pro" in the provided link to the image, as I was looking on downloads page instead at the opening post.

1 Like
5

:white_check_mark: Eagle Eye :eagle:
Thanks for catching it. Mea culpa - I c/p the incorrect link.
I did download the correct image though

image
image1685×198 59.2 KB

Thanks everyone for your help :pray:t5:

6

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.