OpenWrt failed to configuring FTTH VLAN based PPPoE

[xiaobo]

My china provider requires that the traffic over the WAN interface is tagged with id 3961, and the rest can be untagged (I don´t have other services like IPTV or VoIp). Anyone could explain how i must configure ?

                     -----------------------
                     |    Netgear Switch   |
                     +---------------------+
                     ^       vlan 3961     ^
                   Port 1               Port 10
                     ^                     ^
                     |                     |
                  OpenWrt(WAN)       FTTH(EPON SFP stick)

openwrt network config

config device
	option name 'epon-ftth'
	option type '8021q'
	option ifname 'eth1'
	option vid '3961'

config interface 'wan'
	option device 'epon-ftth'
	option proto 'pppoe'

PPPoE log

[  842.244445] pppoe-wan: renamed from ppp0
[  844.269445] br-lan: port 1(eth0) entered disabled state
[  844.539496] device eth0 left promiscuous mode
[  844.541043] br-lan: port 1(eth0) entered disabled state
[  846.286104] ixgbevf 0000:00:06.0: NIC Link is Up 1 Gbps
[  846.287668] 8021q: adding VLAN 0 to HW filter on device eth0
[  846.288766] br-lan: port 1(eth0) entered blocking state
[  846.288768] br-lan: port 1(eth0) entered disabled state
[  846.290358] device eth0 entered promiscuous mode
[  846.292668] br-lan: port 1(eth0) entered blocking state
[  846.292669] br-lan: port 1(eth0) entered forwarding state
[  846.308114] 8021q: adding VLAN 0 to HW filter on device eth1
[  846.308126] ixgbevf 0000:00:0a.0: NIC Link is Up 1 Gbps

Update:

port 1 and 10 tagged Now its working.....

[trendy]

config interface 'wan'
	option ifname 'eth1.3961'
	option proto 'pppoe'

and you probably want to make port 10 tagged too.

[trendy]

Both tagged.