OpenWrt blocks my openvpn traffic

Installing and Using OpenWrt
21

Hello People,
I have the same problem again.
similar router GL-AR150-Ext-2 OpenWrt 18.06.1,

config files:

openvpn:

remote remoteip
dev tap
ifconfig 10.4.0.6 255.255.255.252
tls-client
ca keyhit/ca.crt
cert keyhit/mike.crt
key keyhit/mike.key
port 5001
mssfix 1200
keepalive 10 60

route 192.168.2.0 255.255.255.0
route-gateway 10.4.0.5

/etc/config/network:

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd19:5adb:f910::/48'

config interface 'lan'
        option type 'bridge'
        option ifname 'eth1'
        option proto 'static'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option hostname 'GL-AR150-bd0'
        option macaddr 'e4:95:6e:45:6b:d1'
        option default_macaddr 'e4:95:6e:45:6b:d1'
        option ipaddr '192.168.10.1'


config interface 'wan'
        option ifname 'eth0'
        option proto 'dhcp'
        option hostname 'GL-AR150-bd0'
        option metric '10'

config interface 'wan6'
        option ifname 'eth0'
        option proto 'dhcpv6'

config interface 'guest'
        option ifname 'guest'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.9.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config interface 'wwan'
        option proto 'dhcp'
        option metric '20'

/etc/config/firewall



config defaults
        option syn_flood '1'
        option input 'ACCEPT'
        option output 'ACCEPT'
        option forward 'REJECT'

config zone
        option name 'lan'
        list network 'lan'
        option input 'ACCEPT'
        option output 'ACCEPT'
        option forward 'ACCEPT'
        option device 'tap+'


config zone
        option name 'wan'
        option input 'REJECT'
        option output 'ACCEPT'
        option forward 'REJECT'
        option masq '1'
        option mtu_fix '1'
        option network 'wan wan6 wwan'

config forwarding
        option src 'lan'
        option dest 'wan'


config rule
        option name 'Allow-Ping'
        option src 'wan'
        option proto 'icmp'
        option icmp_type 'echo-request'
        option family 'ipv4'
        option target 'ACCEPT'

config rule
        option name 'Allow-IGMP'
        option src 'wan'
        option proto 'igmp'
        option family 'ipv4'
        option target 'ACCEPT'


config rule
        option name 'Allow-DHCPv6'
        option src 'wan'
        option proto 'udp'
        option src_ip 'fc00::/6'
        option dest_ip 'fc00::/6'
        option dest_port '546'
        option family 'ipv6'
        option target 'ACCEPT'


config rule
        option name 'Allow-MLD'
        option src 'wan'
        option proto 'icmp'
        option src_ip 'fe80::/10'
        list icmp_type '130/0'
        list icmp_type '131/0'
        list icmp_type '132/0'
        list icmp_type '143/0'
        option family 'ipv6'
        option target 'ACCEPT'


config rule
        option name 'Allow-ICMPv6-Input'
        option src 'wan'
        option proto 'icmp'
        list icmp_type 'echo-request'
        list icmp_type 'echo-reply'
        list icmp_type 'destination-unreachable'
        list icmp_type 'packet-too-big'
        list icmp_type 'time-exceeded'
        list icmp_type 'bad-header'
        list icmp_type 'unknown-header-type'
        list icmp_type 'router-solicitation'
        list icmp_type 'neighbour-solicitation'
        list icmp_type 'router-advertisement'
        list icmp_type 'neighbour-advertisement'
        option limit '1000/sec'
        option family 'ipv6'
        option target 'ACCEPT'


config rule
        option name 'Allow-ICMPv6-Forward'
        option src 'wan'
        option dest '*'
        option proto 'icmp'
        list icmp_type 'echo-request'
        list icmp_type 'echo-reply'
        list icmp_type 'destination-unreachable'
        list icmp_type 'packet-too-big'
        list icmp_type 'time-exceeded'
        list icmp_type 'bad-header'
        list icmp_type 'unknown-header-type'
        option limit '1000/sec'
        option family 'ipv6'
        option target 'ACCEPT'

config rule
        option name 'Allow-IPSec-ESP'
        option src 'wan'
        option dest 'lan'
        option proto 'esp'
        option target 'ACCEPT'

config rule
        option name 'Allow-ISAKMP'
        option src 'wan'
        option dest 'lan'
        option dest_port '500'
        option proto 'udp'
        option target 'ACCEPT'

config include
        option path '/etc/firewall.user'
        option reload '1'

config include 'miniupnpd'
        option type 'script'
        option path '/usr/share/miniupnpd/firewall.include'
        option family 'any'
        option reload '1'

config include 'shadowsocks'
        option type 'script'
        option path '/var/etc/shadowsocks.include'
        option reload '1'


config rule 'glservice_rule'
        option name 'glservice'
        option dest_port '83'
        option proto 'tcp udp'
        option src 'wan'
        option target 'ACCEPT'
        option enabled '0'

config zone 'guestzone'
        option name 'guestzone'
        option network 'guest'
        option forward 'REJECT'
        option output 'ACCEPT'
        option input 'REJECT'

config forwarding 'guestzone_fwd'
        option src 'guestzone'
        option dest 'wan'

config rule 'guestzone_dhcp'
        option name 'guestzone_DHCP'
        option src 'guestzone'
        option target 'ACCEPT'
        option proto 'udp'
        option dest_port '67-68'

config rule 'guestzone_dns'
        option name 'guestzone_DNS'
        option src 'guestzone'
        option target 'ACCEPT'
        option proto 'tcp udp'
        option dest_port '53'


config include 'glfw'
        option type 'script'
        option path '/usr/bin/glfw.sh'
        option reload '1'

config include 'glqos'
        option type 'script'
        option path '/usr/sbin/glqos.sh'
        option reload '1'

config include 'mwan3'
        option type 'script'
        option path '/var/etc/mwan3.include'
        option reload '1'

It's same like with first router. In case I delete the firewall it works
in case I run with firewall, it dosent.

I tried (without to understand):

uci set firewall.@zone[0].device="tap+"
uci commit firewall
service firewall restart

but this time it dosent help me.

Sorry for almost the same question again, but I don't know...
can someone tell me, what to do, maybe with a hint why?

The first openwrt router works without any problems with openvpn now.

22

Setup:
192.168.10.0/24 --- openwrt router/openvpn client ----- Internet ---- OpenVPN Server ---- 192.168.2.0/24

23

Try changing to dev tun instead of tap. Works much better and solved the issue earlier in the thread.

1 Like
24

it certainly did. It works.

25

do you have an example of a working openvpn confiuguration to connect 2 networks with tun with openvpn?

I know only with tap how to make it.

26

It is called site-to-site connection.
OpenVPN-based solution: server + client + site-to-site

1 Like
27

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.