See post above
How is it that this problem has been going on for almost a year in source, and only appeared in the -rc3? (No issues in rc1/rc2 tho)
Including the missing ; in `11_upgrades.js` worked for me but I had to clear the Firefox cache.
Edit: TP-Link Archer C6 v2 (EU/RU/JP) in AP mode with several vlans and ssids working Ok in RC3.
Here two AX3600 in mesh, one as AP has tried all the RC without any problem. Yesterday I updated the other, that acts as router from 24.10.5 to the RC and the radios didn't start. I started them from luci I reboot the system again and the radios didn't start again. I restarted them from luci again without problem.
Any idea?
1 Like
Upgraded the following devices to 25.12.0-rc3 with sysupgrade images built locally using Image Builder.
From 25.12.0-rc2 to 25.12.0-rc3
- 1x GL.iNet GL-MT3000 (Beryl AX) (USA Model) (Target: mediatek/filogic)
- 2x GL.iNet GL-MT6000 (Flint 2) (USA Model) (Target: mediatek/filogic)
- 3x Dynalink DL-WRX36 (USA Model) (Target: qualcommax/ipq807x)
- 1x Netgear R7800 (USA Model) (Target: ipq806x/generic)
From 24.10.4 to 25.12.0-rc3
- 2x TP-Link Archer A7 v5 (EU Model) (Target: ath79/generic)
Thank you to all the devs.
1 Like
I had the same error on one of my linksys mx4300.
The problem was solved by ai, not me.
ssh into router and do
mv /www/luci-static/resources/view/status/include/11_upgrades.js /www/luci-static/resources/view/status/include/11_upgrades.js.bak
And then refresh page. That solved problem on my side.
5 Likes
From 25.12.0-rc2 to 25.12.0-rc3 on two of my Linksys mx5500. And on three Linksys mx5300. Used owut worked on all devices.
Only one mx5500 has a luci ‘problem’ anyone an idea?
It’s discussed in many posts above yours.
1 Like
oops sorry, didn’t read all this morning. Thanks for the heads up. 
1 Like
Used owut to upgrade from rc2 to rc3, worked fine for all of
- BPI R4
- GL mt3000
- Redmi AX6s
- XikeStor SKS8300-8X
Linksys MR7350 has this issue also. I redownloaded just in case and reflashed - after the second time I then booted the previous partition to RC2 no issues at all.
that worked on Linksys MR7350 - thank you. Can now see the webui on R3.
FYI no issues on GL.iNet GL MT6000 - that upgraded as expected and stable. I will run the MR7350 for a bit, probably through this snow storm here in the US (granted we even keep internet during this)
Succesfully updated GL-MT6000 .rc2 → .rc3.
Besides the need to add the semicolon to /11_upgrades.js,
no ill-effects observerd.
Will monitor.
1 Like
Had to do it twice, but all seems OK for now.
Thanks for checking. Looks like something was up with the archive. It works as expected after redownloading 
3 days uptime on two AX3200 and generic x86 - no obvious problems so far.
I have a TP Link c7-v5. After upgrade from rc1, I am unable to install packages using apk with rc3. I had the same issue attempting upgrade from rc1 to rc2.
I am not sure why two different kernel version are mentioned.
M
root@tv25:~# apk add tcpdump
ERROR: unable to select packages:
base-files-1686~30527a4c34:
breaks: world[base-files=1679~9e9b05130c]
kernel-6.12.66~c9318ac0cd981a67d503c47ccc54781a-r1:
breaks: world[kernel=6.12.62~c6e6ab4e91eb4899af50757abc3df834-r1]
satisfies: kmod-ath-6.12.66.6.18-r1[kernel=6.12.66~c9318ac0cd981a67d503c47ccc54781a-r1]
kmod-ath10k-ct-6.12.66.2025.12.01~bb84e159-r1[kernel=6.12.66~c9318ac0cd981a67d503c47ccc54781a-r1]
…. etc
Apk config superficially looks fine
root@tv25:/etc/apk/repositories.d# cat distfeeds.list
https://downloads.openwrt.org/releases/25.12.0-rc3/targets/ath79/generic/packages/packages.adb
https://downloads.openwrt.org/releases/25.12.0-rc3/packages/mips_24kc/base/packages.adb
https://downloads.openwrt.org/releases/25.12.0-rc3/targets/ath79/generic/kmods/6.12.66-1-c9318ac0cd981a67d503c47ccc54781a/packages.adb
https://downloads.openwrt.org/releases/25.12.0-rc3/packages/mips_24kc/luci/packages.adb
https://downloads.openwrt.org/releases/25.12.0-rc3/packages/mips_24kc/packages/packages.adb
https://downloads.openwrt.org/releases/25.12.0-rc3/packages/mips_24kc/routing/packages.adb
https://downloads.openwrt.org/releases/25.12.0-rc3/packages/mips_24kc/telephony/packages.adb
https://downloads.openwrt.org/releases/25.12.0-rc3/packages/mips_24kc/video/packages.adb
root@tv25:/etc/apk/repositories.d# uname -a
Linux tv25 6.12.66 #0 Wed Jan 21 00:20:54 2026 mips GNU/Linux
Just an FYI, Linksys WRT3200ACM. Other than the main Status page, all looks OK. Even Luci SQM was present without me having to install it manually.
SyntaxError
unexpected token: string literal
in https://192.168.1.1/luci-static/resources/view/status/include/11_upgrades.js?v=26.023.12878~01801c0-1768954854:1
at require/compileClass/< (https://192.168.1.1/luci-static/resources/luci.js?v=26.023.12878~01801c0-1768954854:173:29)
So which release are you on now and how did you upgrade?
I am now on 25.12-rc3. I did an in place upgrade from 25.12-rc1