The owut package replaces auc when crossing the 23.05->24.10 boundary, they both are CLI clients of the ASU system. The LuCI Attended Sysupgrade client will continue on as-is, likewise for the Firmware Selector online ASU client.
5 Likes
On x86-64, i had succeded upgrade using attended system upgrade to 24.10.0 months ago, but this morning i tried to upgrade to 24.10.1 & i got troubles with my lan card, my lan card are realtek r8169 & 8139too. Even deactivating my firewall didn't give me a good result. Everything is fine on openwrt machine but traffic from lan card doesn't forward, it just stays in the router. Ssh & luci is working fine. Now i am going back to 23.05.5, i have tried to go back to 24.10.0 it's failed with the same error. Now i am searching what asu command i used that time that could make v24.10.0 working fine without trouble... Only a bit delay in 24.10.0.
At this point, you may want to consider doing a fresh install of 24.10.1 and configuring from default settings. Also using ethtool to disable EEE 'Energy Efficient Ethernet' on your network adapters.
Will disabling energy efficient ethenet help? Ok, i will try it soon, not now, if i have to do fresh flash my system will go down, so i have to find the best time to do it. Thanks anyway.
I don't know if it will help in your particular situation, but it probably won't hurt. 
It was listed as a "known issue" in the 24.10.1 release notes (top of this thread) in relation to MT7530 switches.
I however had an issue on x86 uplinked to a non-MediaTek switch, and disabling EEE resolved it.
I see, i will post after i reflash with 24.10.1 & inform here fail or success. It looks good to try
Error again openwrt attended sysupgrade Could not reach API at "https://sysupgrade.openwrt.org/json/v1/overview.json". Please try again later.
6 Likes
Why every software I've installed has to be deleted at this upgrade? Was this absolutely neccessary?
Are you referring to upgrading the software - which is contained in the new firmware?
If so, you must upgrade the entire image, hence needing to upgrade software too. FYI - you can use the Firmware Selector to include all your software packages in the new image.
Isn't that option borked lately? I include software there, and it won't compile it throws some error.
1 Like
Finally upgraded with sysupgrade a few days ago. Works flawlessly.
| Nom d'hôte (hostname) | OpenWrt |
|---|---|
| Modèle | UBNT_E100 (CN5020p1.1-500-SCP) |
| Architecture | UBNT_E100 (CN5020p1.1-500-SCP) |
| Plate-forme cible | octeon/generic |
| Version du micrologiciel | OpenWrt 24.10.1 r28597-0425664679 / LuCI openwrt-24.10 branch 25.133.85963~b1383cc |
| Version du noyau | 6.6.86 |
If it bothers you, I'd recommend learning how to use https://openwrt.org/docs/guide-user/additional-software/imagebuilder
Took me a little bit of effort to learn but got there eventually
3 Likes
It is working now. Thank you so much. I just delete network file in /etc/config & it works. I think the problem is in configuration file, i dont even put "eee" in my interface configuration.
You don't want to delete that file. Perhaps I am reading your post out of context. Do you mean to say that you reconfigured from scratch?
1 Like
Yes. It is working fine now. Network file in the config dir is from my old version of openwrt (v23.05) backup. In the version 24.10.1 original image you won't find that file, so i figure it out there won't be a problem to delete that file. I just delete that file, i let other backup files there & reboot.
For the record, this was not related to the WiFi radio, as I originally suspected. It was due to an incorrect config, that was seemingly changed as part of the upgrade from 24.10.0 to 24.10.1! This incorrect config caused DHCP request from WiFi clients to not be forwarded from the AP to the router, so the clients never got an IP. This again caused one device to attempt reconnect/reboot in an attempt to fix it. (That's actually a good design, nice job Tibber Pulse).
The last thing I did before upgrading was to backup the config, and the first thing I did after was making another backup. I compared /etc/config/network, and this is the result. The one on the left is on 24.10.0, how it should look. The one on the right is 24.10.1. Downgrading from 24.10.1 to 24.10.0 did not change the config back. This is very strange, anyone else seen something remotely similar?
Looking around for reports on the EA3500?
5GHz will not enable on this new build, what I was trying to do is test the bridge repeater and as I was about to enable 5GHz the EA3500 stalled and became unresponsive until it a few minutes it reset my config.
2.4GHz works fine it was able to get the connection established on bridge repeater, I did go back to oem to find out it 5GHz was working, reset/restored defaults and back to the factory image, sysupgrade images from online downloads.openwrt.org.
radio1 (2004): WARNING: Variable 'data' does not exist or is not an array/object
Sun Apr 13 16:52:59 2025 kern.info kernel: [ 34.119875] mv88e6085 f1072004.mdio-bus-mii:10 ethernet1: Link is Up - 1Gbps/Full - flow control rx/tx
Sun Apr 13 16:52:59 2025 kern.info kernel: [ 34.129327] br-lan: port 1(ethernet1) entered blocking state
Sun Apr 13 16:52:59 2025 kern.info kernel: [ 34.135063] br-lan: port 1(ethernet1) entered forwarding state
Sun Apr 13 16:52:59 2025 daemon.notice netifd: Network device 'ethernet1' link is up
Sun Apr 13 16:52:59 2025 daemon.notice netifd: bridge 'br-lan' link is up
Sun Apr 13 16:52:59 2025 daemon.notice netifd: Interface 'lan' has link connectivity
Sun Apr 13 16:53:00 2025 daemon.notice hostapd: Set new config for phy phy1:
Sun Apr 13 16:53:00 2025 daemon.notice procd: /etc/rc.d/S99bootcount: Boot count sucessfully reset to zero.
Sun Apr 13 16:53:00 2025 daemon.notice wpa_supplicant[1348]: Set new config for phy phy1
Sun Apr 13 16:53:01 2025 daemon.info procd: - init complete -
Sun Apr 13 16:53:02 2025 daemon.notice wpa_supplicant[1348]: Set new config for phy phy1
Sun Apr 13 16:53:02 2025 daemon.notice hostapd: Set new config for phy phy1: /var/run/hostapd-phy1.conf
Sun Apr 13 16:53:02 2025 daemon.notice hostapd: Restart interface for phy phy1
Sun Apr 13 16:53:02 2025 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 hw_mode=a beacon_int=100 stationary_ap=1 chanlist=161 #num_global_macaddr=1 #macaddr_base= ieee80211n=1 ht_coex=0 ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC123][MAX-AMSDU-7935] channel=161 interface=phy1-ap0 bssid=48:f8:b3:a3:93:cf ctrl_interface=/var/run/hostapd ap_isolate=1 bss_load_update_period=60 chan_util_avg_period=600 disassoc_low_ack=1 skip_inactivity_poll=0 preamble=1 wmm_enabled=1 ignore_broadcast_ssid=0 uapsd_advertisement_enabled=1 utf8_ssid=1 multi_ap=0 auth_algs=1 wpa=0 ssid=Linksys3642_5GHz bridge=br-lan wds_bridge= snoop_iface=br-lan qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56 #default_macaddr nas_identifier=48f8b3a393cf (phy phy1) --> new PHY
Sun Apr 13 16:53:03 2025 kern.info kernel: [ 38.576798] ieee80211 phy1: 88w8366 v7, 48f8b3a393cf, AP firmware 5.2.8.17
Sun Apr 13 16:53:03 2025 kern.info kernel: [ 38.638655] br-lan: port 5(phy1-ap0) entered blocking state
Sun Apr 13 16:53:03 2025 kern.info kernel: [ 38.644282] br-lan: port 5(phy1-ap0) entered disabled state
Sun Apr 13 16:53:03 2025 kern.info kernel: [ 38.649962] mwl8k 0000:02:00.0 phy1-ap0: entered allmulticast mode
Sun Apr 13 16:53:03 2025 kern.info kernel: [ 38.656495] mwl8k 0000:02:00.0 phy1-ap0: entered promiscuous mode
Sun Apr 13 16:53:03 2025 daemon.notice hostapd: Frequency 5805 (primary) not allowed for AP mode, flags: 0x73 NO-IR
Sun Apr 13 16:53:03 2025 daemon.err hostapd: Primary frequency not allowed
Sun Apr 13 16:53:03 2025 daemon.warn hostapd: phy1-ap0: IEEE 802.11 Configured channel (161) or frequency (5805) (secondary_channel=-1) not found from the channel list of the current mode (2) IEEE 802.11a
Sun Apr 13 16:53:03 2025 daemon.warn hostapd: phy1-ap0: IEEE 802.11 Hardware does not support configured channel
Sun Apr 13 16:53:03 2025 daemon.err hostapd: Could not select hw_mode and channel. (-3)
Sun Apr 13 16:53:03 2025 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->DISABLED
Sun Apr 13 16:53:03 2025 daemon.notice hostapd: phy1-ap0: AP-DISABLED
Sun Apr 13 16:53:03 2025 daemon.err hostapd: phy1-ap0: Unable to setup interface.
Sun Apr 13 16:53:03 2025 daemon.notice hostapd: nl80211: deinit ifname=phy1-ap0 disabled_11b_rates=0
Sun Apr 13 16:53:03 2025 kern.info kernel: [ 38.674734] mwl8k 0000:02:00.0 phy1-ap0: left allmulticast mode
Sun Apr 13 16:53:03 2025 kern.info kernel: [ 38.681224] mwl8k 0000:02:00.0 phy1-ap0: left promiscuous mode
Sun Apr 13 16:53:03 2025 kern.info kernel: [ 38.687239] br-lan: port 5(phy1-ap0) entered disabled state
Sun Apr 13 16:53:03 2025 daemon.err hostapd: rmdir[ctrl_interface=/var/run/hostapd]: Permission denied
Sun Apr 13 16:53:03 2025 daemon.notice hostapd: phy1-ap0: CTRL-EVENT-TERMINATING
Sun Apr 13 16:53:03 2025 daemon.err hostapd: hostapd_free_hapd_data: Interface phy1-ap0 wasn't started
Sun Apr 13 16:53:03 2025 daemon.notice hostapd: hostapd.add_iface failed for phy phy1 ifname=phy1-ap0
Sun Apr 13 16:53:04 2025 daemon.notice netifd: Wireless device 'radio1' is now uptype or paste code here
In luci wireless it states it is disabled.
root@OpenWrt:~# cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option path 'mbus@f1000000/mbus@f1000000:pcie@82000000/pci0000:00/0000:00:01.0/0000:01:00.0'
option band '2g'
option channel '1'
option htmode 'HT20'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'none'
config wifi-device 'radio1'
option type 'mac80211'
option path 'mbus@f1000000/mbus@f1000000:pcie@82000000/pci0000:00/0000:00:02.0/0000:02:00.0'
option band '5g'
option channel '36'
option htmode 'HT40'
option disabled '1'
config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'none'
root@OpenWrt:~# cat /etc/config/network
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd75:1193:b5c4::/48'
config device
option name 'br-lan'
option type 'bridge'
list ports 'ethernet1'
list ports 'ethernet2'
list ports 'ethernet3'
list ports 'ethernet4'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config device
option name 'internet'
option macaddr '48:f8:b3:a3:93:cc'
config interface 'wan'
option device 'internet'
option proto 'dhcp'
config interface 'wan6'
option device 'internet'
option proto 'dhcpv6'
root@OpenWrt:~#
Hope this helps or I did I post incorrectly?
Regards
It is disabled, feel free to enable it.
1 Like
I installed 24.10.1 on Linksys EA4500.
I detected Kernel error and cannot connect 5GHz WiFi. (2.4GHz is OK)
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.330020] ------------[ cut here ]------------
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.334677] WARNING: CPU: 0 PID: 0 at backports-6.12.6/net/mac80211/rx.c:5361 0xbf1247e8 [mac80211@99abbb39+0x7a000]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.345310] Modules linked in: jitterentropy_rng pppoe ppp_async nft_fib_inet nf_flow_table_inet pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mwl8k(O) mac80211(O) cfg80211(O) slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c crc_ccitt compat(O) sha512_generic sha512_arm seqiv sha3_generic drbg hmac geniv rng cmac fsl_mph_dr_of ehci_platform ehci_orion ehci_fsl ehci_hcd gpio_button_hotplug(O)
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.404122] CPU: 0 PID: 0 Comm: swapper Tainted: G W O 6.6.86 #0
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.411385] Hardware name: Marvell Kirkwood (Flattened Device Tree)
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.417686] Function entered at [<c0107060>] from [<c0103e6c>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.423550] Function entered at [<c0103e6c>] from [<c07db7cc>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.429411] Function entered at [<c07db7cc>] from [<c01154e0>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.435269] Function entered at [<c01154e0>] from [<c0115560>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.441129] Function entered at [<c0115560>] from [<bf1247e8>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.446991] Function entered at [<bf1247e8>] from [<bf124db4>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.452849] Function entered at [<bf124db4>] from [<bf0f5748>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.458709] Function entered at [<bf0f5748>] from [<c01186e0>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.464569] Function entered at [<c01186e0>] from [<c01187e0>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.470427] Function entered at [<c01187e0>] from [<c07d7b74>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.476288] Function entered at [<c07d7b74>] from [<c0100adc>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.482147] Exception stack(0xc0b01f48 to 0xc0b01f90)
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.487228] 1f40: 00000000 00000000 c0b05f20 60000013 00000000 00000000
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.495443] 1f60: c0b05f20 c0b032b4 c0b89840 c083d108 c0b95010 c0b03248 c12f8cb8 c0b01f98
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.503654] 1f80: c080108c c0144b70 60000013 ffffffff
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.508727] Function entered at [<c0100adc>] from [<c0144b70>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.514587] Function entered at [<c0144b70>] from [<c0144eb8>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.520446] Function entered at [<c0144eb8>] from [<c08011b4>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.526306] Function entered at [<c08011b4>] from [<c0a008e4>]
Wed May 28 12:01:35 2025 kern.warn kernel: [ 1084.532206] ---[ end trace 0000000000000000 ]---