OpenWrt 24.10.1 - Service Release

andywob · 2025-04-19T15:46:42.387Z

Hi folks,
just upgraded from 24.10.0 to 24.10.1 via attended sysupgrade on my Xiaomi AX3600 without any issue.
Thanks to all developers and happy easter!
best
Andy

systemcrash · 2025-04-19T19:14:13.393Z

This is a harmless error. It says that the kernel module for RPi lacks the default function mentioned. It must be fixed upstream.

github.com/raspberrypi/linux

Device 'grafx' does not have a release() function

opened 08:23AM - 10 Apr 25 UTC

Noltari

### Describe the bug bcm2711 devices show the following trace: ``` [ 0.21680…0] ------------[ cut here ]------------ [ 0.216807] Device 'grafx' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. [ 0.216863] WARNING: CPU: 0 PID: 1 at drivers/base/core.c:2516 device_release+0x80/0x90 [ 0.216887] Modules linked in: [ 0.216896] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.85 #0 [ 0.216905] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) [ 0.216911] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.216919] pc : device_release+0x80/0x90 [ 0.216928] lr : device_release+0x80/0x90 [ 0.216936] sp : ffffffc080ccb6d0 [ 0.216940] x29: ffffffc080ccb6d0 x28: 0000000000000000 x27: ffffff8040d49810 [ 0.216953] x26: ffffff8040c904b8 x25: ffffff8040c904a0 x24: ffffffc0808a7f08 [ 0.216964] x23: ffffffc080a1a6d8 x22: 0000000000000000 x21: ffffffc080a1afe0 [ 0.216976] x20: 0000000000000000 x19: ffffff8040c900b8 x18: 000000000000009f [ 0.216987] x17: 206e656b6f726220 x16: 7369207469202c6e x15: ffffffc080b4ee88 [ 0.216998] x14: 00000000000001dd x13: 000000000000009f x12: 00000000ffffffea [ 0.217009] x11: 00000000ffffefff x10: ffffffc080ba6e88 x9 : ffffffc080b4ee30 [ 0.217020] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8 [ 0.217031] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc080ccb4d0 [ 0.217042] x2 : ffffffc080b4edc8 x1 : ffffffc080b4edc8 x0 : 000000000000007a [ 0.217053] Call trace: [ 0.217058] device_release+0x80/0x90 [ 0.217067] kobject_put+0xac/0x100 [ 0.217078] put_device+0x14/0x24 [ 0.217086] genpd_remove+0x16c/0x244 [ 0.217093] pm_genpd_remove+0x2c/0x50 [ 0.217099] bcm2835_power_probe+0x1f8/0x2b8 [ 0.217107] platform_probe+0x68/0xc4 [ 0.217118] really_probe+0x148/0x2b0 [ 0.217125] __driver_probe_device+0x78/0x128 [ 0.217131] driver_probe_device+0x40/0xdc [ 0.217138] __device_attach_driver+0xb8/0xf8 [ 0.217145] bus_for_each_drv+0x70/0xb8 [ 0.217151] __device_attach+0xa0/0x184 [ 0.217158] device_initial_probe+0x14/0x20 [ 0.217165] bus_probe_device+0xac/0xb0 [ 0.217171] device_add+0x5a8/0x760 [ 0.217177] platform_device_add+0x184/0x240 [ 0.217184] mfd_add_device+0x3e8/0x4c0 [ 0.217195] devm_mfd_add_devices+0xa0/0x118 [ 0.217202] bcm2835_pm_probe+0x144/0x1d8 [ 0.217210] platform_probe+0x68/0xc4 [ 0.217217] really_probe+0x148/0x2b0 [ 0.217224] __driver_probe_device+0x78/0x128 [ 0.217230] driver_probe_device+0x40/0xdc [ 0.217237] __driver_attach+0x90/0x160 [ 0.217243] bus_for_each_dev+0x64/0xa4 [ 0.217249] driver_attach+0x24/0x30 [ 0.217256] bus_add_driver+0xe4/0x208 [ 0.217262] driver_register+0x5c/0x124 [ 0.217269] __platform_driver_register+0x28/0x34 [ 0.217276] bcm2835_pm_driver_init+0x1c/0x28 [ 0.217286] do_one_initcall+0x6c/0x1fc [ 0.217294] kernel_init_freeable+0x208/0x2e4 [ 0.217306] kernel_init+0x28/0x1e4 [ 0.217313] ret_from_fork+0x10/0x20 [ 0.217320] ---[ end trace 0000000000000000 ]--- ``` ### Steps to reproduce the behaviour Install OpenWrt snapshot with kernel 6.6.85 from: https://downloads.openwrt.org/snapshots/targets/bcm27xx/bcm2711/ Boot and see the trace. ### Device (s) Raspberry Pi 4 Mod. B ### System OpenWrt (snapshots from main development branch) da7125f985dfe3cb0cf91e3c47f1ace88018e466 6.6.85 ### Logs ``` [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.6.85 (noltari@slimbook) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r27984+1-7afdbc0955) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Apr 10 07:38:18 2025 [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x000000002ac00000..0x000000002ebfffff (65536 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x000000003ef66100..0x000000003ef664ff (1 KiB) nomap non-reusable nvram@1 [ 0.000000] OF: reserved mem: 0x000000003ef66540..0x000000003ef66622 (0 KiB) nomap non-reusable nvram@0 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xfb7f34c0-0xfb7f5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 16384 pages in unavailable ranges [ 0.000000] percpu: Embedded 18 pages/cpu s36776 r8192 d28760 u73728 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:03:78:1E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA0,115200 root=PARTUUID=f2eaa71f-02 rootfstype=squashfs,ext4 rootwait [ 0.000000] cgroup: Disabling memory control group subsystem [ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0' [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912 [ 0.000000] Policy zone: DMA32 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB) [ 0.000000] Memory: 3825832K/4050944K available (8512K kernel code, 932K rwdata, 2360K rodata, 448K init, 543K bss, 159576K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000100] Console: colour dummy device 80x25 [ 0.000106] printk: console [tty1] enabled [ 0.000349] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000362] pid_max: default: 32768 minimum: 301 [ 0.000529] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000559] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001452] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.001560] rcu: Hierarchical SRCU implementation. [ 0.001567] rcu: Max phase no-delay instances is 1000. [ 0.001895] smp: Bringing up secondary CPUs ... [ 0.002118] Detected PIPT I-cache on CPU1 [ 0.002173] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.002407] Detected PIPT I-cache on CPU2 [ 0.002440] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.002651] Detected PIPT I-cache on CPU3 [ 0.002684] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.002717] smp: Brought up 1 node, 4 CPUs [ 0.002743] SMP: Total of 4 processors activated. [ 0.002749] CPU features: detected: 32-bit EL0 Support [ 0.002754] CPU features: detected: CRC32 instructions [ 0.002793] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.002802] CPU: All CPU(s) started at EL2 [ 0.002807] alternatives: applying system-wide alternatives [ 0.007825] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.007860] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.008822] pinctrl core: initialized pinctrl subsystem [ 0.009458] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.010195] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.010303] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.010469] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.010667] thermal_sys: Registered thermal governor 'step_wise' [ 0.010686] cpuidle: using governor ladder [ 0.010702] cpuidle: using governor menu [ 0.010792] ASID allocator initialised with 65536 entries [ 0.010866] Serial: AMBA PL011 UART driver [ 0.012517] /soc/interrupt-controller@40041000: Fixed dependency cycle(s) with /soc/interrupt-controller@40041000 [ 0.012848] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.029979] raspberrypi-firmware soc:firmware: Attached to firmware from 2025-02-17T20:03:07, variant start [ 0.039996] raspberrypi-firmware soc:firmware: Firmware hash is da7125f985dfe3cb0cf91e3c47f1ace88018e466 [ 0.052130] Modules: 29520 pages in range for non-PLT usage [ 0.052134] Modules: 521040 pages in range for PLT usage [ 0.052733] cryptd: max_cpu_qlen set to 1000 [ 0.053086] bcm2835-dma fe007000.dma-controller: DMA legacy API manager, dmachans=0x1 [ 0.053868] SCSI subsystem initialized [ 0.053943] usbcore: registered new interface driver usbfs [ 0.053961] usbcore: registered new interface driver hub [ 0.053980] usbcore: registered new device driver usb [ 0.054100] mc: Linux media interface: v0.10 [ 0.054119] videodev: Linux video capture interface: v2.00 [ 0.054134] pps_core: LinuxPPS API ver. 1 registered [ 0.054139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.054150] PTP clock support registered [ 0.055181] clocksource: Switched to clocksource arch_sys_counter [ 0.056887] NET: Registered PF_INET protocol family [ 0.057104] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.058847] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.058886] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.058900] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.058995] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.060123] TCP: Hash tables configured (established 32768 bind 32768) [ 0.060385] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.060561] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.060594] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.060733] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.060771] PCI: CLS 0 bytes, default 64 [ 0.061696] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.062059] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.089230] pinctrl-bcm2835 fe200000.gpio: GPIO_OUT persistence: yes [ 0.090111] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.090126] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 0.090147] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x067fffffff -> 0x0080000000 [ 0.090166] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 0.090802] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.090813] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.090821] pci_bus 0000:00: root bus resource [mem 0x600000000-0x67fffffff] (bus address [0x80000000-0xffffffff]) [ 0.090847] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.090889] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.092302] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.092360] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator [ 0.092425] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator [ 0.092450] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator [ 0.206784] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 0.206851] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.206908] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.207032] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.207222] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.207243] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.207253] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.207299] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.207306] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.207403] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 0.207465] pcieport 0000:00:00.0: PME: Signaling with IRQ 26 [ 0.207578] pcieport 0000:00:00.0: AER: enabled with IRQ 26 [ 0.207872] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver. [ 0.207881] bcm2708_fb: probe of soc:fb failed with error -2 [ 0.210624] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.211110] iproc-rng200 fe104000.rng: hwrng registered [ 0.211164] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.211382] rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000 [ 0.211421] rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem [ 0.214997] brd: module loaded [ 0.216559] loop: module loaded [ 0.216800] ------------[ cut here ]------------ [ 0.216807] Device 'grafx' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. [ 0.216863] WARNING: CPU: 0 PID: 1 at drivers/base/core.c:2516 device_release+0x80/0x90 [ 0.216887] Modules linked in: [ 0.216896] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.85 #0 [ 0.216905] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) [ 0.216911] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.216919] pc : device_release+0x80/0x90 [ 0.216928] lr : device_release+0x80/0x90 [ 0.216936] sp : ffffffc080ccb6d0 [ 0.216940] x29: ffffffc080ccb6d0 x28: 0000000000000000 x27: ffffff8040d49810 [ 0.216953] x26: ffffff8040c904b8 x25: ffffff8040c904a0 x24: ffffffc0808a7f08 [ 0.216964] x23: ffffffc080a1a6d8 x22: 0000000000000000 x21: ffffffc080a1afe0 [ 0.216976] x20: 0000000000000000 x19: ffffff8040c900b8 x18: 000000000000009f [ 0.216987] x17: 206e656b6f726220 x16: 7369207469202c6e x15: ffffffc080b4ee88 [ 0.216998] x14: 00000000000001dd x13: 000000000000009f x12: 00000000ffffffea [ 0.217009] x11: 00000000ffffefff x10: ffffffc080ba6e88 x9 : ffffffc080b4ee30 [ 0.217020] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8 [ 0.217031] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc080ccb4d0 [ 0.217042] x2 : ffffffc080b4edc8 x1 : ffffffc080b4edc8 x0 : 000000000000007a [ 0.217053] Call trace: [ 0.217058] device_release+0x80/0x90 [ 0.217067] kobject_put+0xac/0x100 [ 0.217078] put_device+0x14/0x24 [ 0.217086] genpd_remove+0x16c/0x244 [ 0.217093] pm_genpd_remove+0x2c/0x50 [ 0.217099] bcm2835_power_probe+0x1f8/0x2b8 [ 0.217107] platform_probe+0x68/0xc4 [ 0.217118] really_probe+0x148/0x2b0 [ 0.217125] __driver_probe_device+0x78/0x128 [ 0.217131] driver_probe_device+0x40/0xdc [ 0.217138] __device_attach_driver+0xb8/0xf8 [ 0.217145] bus_for_each_drv+0x70/0xb8 [ 0.217151] __device_attach+0xa0/0x184 [ 0.217158] device_initial_probe+0x14/0x20 [ 0.217165] bus_probe_device+0xac/0xb0 [ 0.217171] device_add+0x5a8/0x760 [ 0.217177] platform_device_add+0x184/0x240 [ 0.217184] mfd_add_device+0x3e8/0x4c0 [ 0.217195] devm_mfd_add_devices+0xa0/0x118 [ 0.217202] bcm2835_pm_probe+0x144/0x1d8 [ 0.217210] platform_probe+0x68/0xc4 [ 0.217217] really_probe+0x148/0x2b0 [ 0.217224] __driver_probe_device+0x78/0x128 [ 0.217230] driver_probe_device+0x40/0xdc [ 0.217237] __driver_attach+0x90/0x160 [ 0.217243] bus_for_each_dev+0x64/0xa4 [ 0.217249] driver_attach+0x24/0x30 [ 0.217256] bus_add_driver+0xe4/0x208 [ 0.217262] driver_register+0x5c/0x124 [ 0.217269] __platform_driver_register+0x28/0x34 [ 0.217276] bcm2835_pm_driver_init+0x1c/0x28 [ 0.217286] do_one_initcall+0x6c/0x1fc [ 0.217294] kernel_init_freeable+0x208/0x2e4 [ 0.217306] kernel_init+0x28/0x1e4 [ 0.217313] ret_from_fork+0x10/0x20 [ 0.217320] ---[ end trace 0000000000000000 ]--- [ 0.218294] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 0.544753] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 0.546363] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002) [ 0.546455] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.546470] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.547374] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0300240000000890 [ 0.547794] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.547806] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.547817] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.547950] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 0.547961] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.547969] usb usb1: Product: xHCI Host Controller [ 0.547975] usb usb1: Manufacturer: Linux 6.6.85 xhci-hcd [ 0.547981] usb usb1: SerialNumber: 0000:01:00.0 [ 0.548149] hub 1-0:1.0: USB hub found [ 0.548197] hub 1-0:1.0: 1 port detected [ 0.548497] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 0.548507] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.548515] usb usb2: Product: xHCI Host Controller [ 0.548521] usb usb2: Manufacturer: Linux 6.6.85 xhci-hcd [ 0.548527] usb usb2: SerialNumber: 0000:01:00.0 [ 0.548684] hub 2-0:1.0: USB hub found [ 0.548731] hub 2-0:1.0: 4 ports detected [ 0.549165] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.549396] usbcore: registered new interface driver uas [ 0.549427] usbcore: registered new interface driver usb-storage [ 0.549467] mousedev: PS/2 mouse device common for all mice [ 0.549770] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.550505] sdhci: Secure Digital Host Controller Interface driver [ 0.550514] sdhci: Copyright(c) Pierre Ossman [ 0.550733] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 0.550916] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.556926] NET: Registered PF_INET6 protocol family [ 0.557429] Segment Routing with IPv6 [ 0.557449] In-situ OAM (IOAM) with IPv6 [ 0.557494] NET: Registered PF_PACKET protocol family [ 0.557522] 8021q: 802.1Q VLAN Support v1.8 [ 0.568813] Key type .fscrypt registered [ 0.568842] Key type fscrypt-provisioning registered [ 0.571748] uart-pl011 fe201000.serial: there is not valid maps for state default [ 0.571918] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 0.572070] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 32, base_baud = 0) is a PL011 rev3 [ 0.572095] printk: console [ttyAMA0] enabled [ 2.093722] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.101236] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.107260] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 2.138689] of_cfs_init [ 2.141189] of_cfs_init: OK [ 2.144064] clk: Disabling unused clocks [ 2.148332] uart-pl011 fe201000.serial: no DMA platform data [ 2.187291] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 2.194459] Waiting for root device PARTUUID=f2eaa71f-02... [ 2.236163] mmc1: new high speed SDIO card at address 0001 [ 2.250603] mmc0: new high speed SDHC card at address ed84 [ 2.254740] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.256507] mmcblk0: mmc0:ed84 SE04G 3.64 GiB [ 2.267653] mmcblk0: p1 p2 [ 2.270560] mmcblk0: mmc0:ed84 SE04G 3.64 GiB [ 2.292834] EXT4-fs (mmcblk0p2): mounted filesystem ff313567-e9f1-5a5d-9895-3ba130b4a864 ro with ordered data mode. Quota mode: disabled. [ 2.305276] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.312287] Freeing unused kernel memory: 448K [ 2.316840] Run /sbin/init as init process [ 2.391756] init: Console is alive [ 2.395272] init: - watchdog - [ 2.437376] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 2.445586] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.452717] usb 1-1: Product: USB2.0 Hub [ 2.457837] hub 1-1:1.0: USB hub found [ 2.461833] hub 1-1:1.0: 4 ports detected [ 2.553877] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 2.570174] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 2.579944] init: - preinit - [ 2.661529] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 2.670983] bcmgenet fd580000.ethernet eth0: Link is Down Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 6.946115] mount_root: mounting /dev/root with options [ 6.997297] EXT4-fs (mmcblk0p2): re-mounted ff313567-e9f1-5a5d-9895-3ba130b4a864 r/w. Quota mode: disabled. [ 7.026406] insmod: module is already loaded - fat [ 7.032479] insmod: module is already loaded - vfat sh: out of range [ 7.048344] urandom-seed: Seed file not found (/etc/urandom.seed) [ 7.207243] procd: - early - [ 7.210178] procd: - watchdog - [ 7.739340] procd: - watchdog - [ 7.743110] procd: - ubus - [ 7.896488] procd: - init - Please press Enter to activate this console. [ 7.991657] kmodloader: loading kernel modules from /etc/modules.d/* [ 8.009727] hid: raw HID events driver (C) Jiri Kosina [ 8.015815] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 8.026977] bcm2835_audio bcm2835_audio: card created with 8 channels [ 8.042464] brcmutil: loading out-of-tree module taints kernel. [ 8.049145] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a [ 8.056645] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2 [ 8.064922] usbcore: registered new interface driver lan78xx [ 8.073571] usbcore: registered new interface driver usbhid [ 8.079208] usbhid: USB HID core driver [ 8.109084] PPP generic driver version 2.4.2 [ 8.113784] NET: Registered PF_PPPOX protocol family [ 8.130919] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.139760] usbcore: registered new interface driver brcmfmac [ 8.146126] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2 [ 8.157794] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin [ 8.170151] kmodloader: done loading kernel modules from /etc/modules.d/* [ 8.372835] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 8.380778] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jul 29 2022 02:15:20 version 7.45.250 (70e9766 CY) FWID 01-e53e306b [ 12.343492] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 12.352745] bcmgenet fd580000.ethernet eth0: Link is Down [ 12.358188] br-lan: port 1(eth0) entered blocking state [ 12.363412] br-lan: port 1(eth0) entered disabled state [ 12.368684] bcmgenet fd580000.ethernet eth0: entered allmulticast mode [ 12.375339] bcmgenet fd580000.ethernet eth0: entered promiscuous mode BusyBox v1.37.0 (2025-04-10 07:28:36 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt SNAPSHOT, r29139+38-65b8a978de ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- OpenWrt recently switched to the "apk" package manager! OPKG Command APK Equivalent Description ------------------------------------------------------------------ opkg install <pkg> apk add <pkg> Install a package opkg remove <pkg> apk del <pkg> Remove a package opkg upgrade apk upgrade Upgrade all packages opkg files <pkg> apk info -L <pkg> List package contents opkg list-installed apk info List installed packages opkg update apk update Update package lists opkg search <pkg> apk search <pkg> Search for packages ------------------------------------------------------------------ For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet root@OpenWrt:~# ``` ### Additional context _No response_

hunghvu · 2025-04-20T01:30:41.987Z

mx4xxx series has dual firmware setup. When doing a sysupgrade, both partitions are upgraded. In other words, you need to do a mtd flash to install OpenWRT on both partitions. If it is 1 OEM and 1 OpenWRT, the upgrade fails (blinking green, soft brick).

When it is soft bricked, you need to do 30/30/30 reset so the router returns to its most current OpenWRT installation.

nickyng · 2025-04-20T01:47:25.521Z

oh i see...so is there an option to just upgrade the partition that is running OpenWRT and leave the other OEM partition as it is ??

acid8000 · 2025-04-20T02:52:43.178Z

I'm keen to follow the outcome of this too as I've got a couple of Raspberry Pi zero devices connected via USB to my OpenWRT router.

hunghvu · 2025-04-20T03:30:04.901Z

Not that I'm aware of. Posting your question directly in mx4xxx support thread can yield better result. OpenWrt support for Linksys MX4200

nickyng · 2025-04-20T03:57:44.186Z

will do.thank u

vinu · 2025-04-20T14:24:54.477Z

Sysupgrade with old config preserved from 24.10.0 to 24.10.1 on two devices (Linksys E8450 (UBI) and OpenWrt One). Both devices running well.
Thank you devs!

Luke02 · 2025-04-20T20:54:04.950Z

I updated two Zyxel WSM 20 and a Zyxel NWA50AX Pro from 23.05 to 24.10.1 and a GLinet MT6000 from an older snapshot to 24.10.1 - no problems so far

wh2k9 · 2025-04-21T01:33:42.446Z

Successful upgrade on my NanoPi R3S from 24.10.0. Cheers!

BoltonUK · 2025-04-21T12:44:00.630Z

Still no fix for the R4S not getting a LAN connection after reboot

ravemir · 2025-04-21T15:32:55.557Z

GL-iNET MT6000 here: upgrade from 24.10.0 went smooth just now, need to test further to determine if all is fine.

User34 · 2025-04-22T02:06:09.076Z

Thank you for posting this. These are the exact reasons I skim the comments for people using my device before upgrading. I'll test when I have more time on the WRT1900ACSV2. I wonder if the following is the reason:

hauke:

Update mwlwifi from 2024-04-19 to 2025-02-06

lleachii · 2025-04-22T06:04:44.876Z

BoltonUK:

Still no fix for the R4S not getting a LAN connection

The only person I've seen submitting bug reports has a bad habit of cursing those responding - causing their posts/accounts to be moderated.

eginnc · 2025-04-22T11:58:03.008Z

Fortunately, progress on fixing the 24.10 NanoPi R4S lan port regression in PR 18078 has become more constructive of late. hauke has indicated he would accept the PR if a last remaining comment is resolved.

Should that not happen, acknowledging this regression in future release notes until it is fixed, either in OpenWrt or upstream, could help reduce the temperature on the issue. It is now clear from PR 18078 that this was not a problem in 23.05, and just as clear that it is a real problem in 24.10.

Back porting the rockchip disable kernel preemption commit in 24.10 to 23.05 would also be helpful if this is never fixed. This commit not only improved VPN performance, but restored a ~40% rockchip QoS throughput deficit relative to friendlywrt. QoS (CAKE) is the NanoPi R4S raison d'être for many.

lfalonso · 2025-04-22T13:53:07.125Z

Hi... 24.10.1 release notes doesn't specify any security fixes, but when you check changelog there are many (CVE-2023-42667, CVE-2023-49141 and so on). These are minor fixes that are not relevant to put on release notes, or should be considered to update to 24.10.1?

modx-arseniy · 2025-04-22T14:49:17.302Z

OLD router xiaomi mi mini usb2+ USB2 MT7620A 1core mips 580MHz;
16MB/128MB DDR2; WiFi 2.4Ghz 2x2 (300M) + 5Ghz 2x2 (867M); WAN 100M + LAN х2 100M

OpenWrt 24.10.1 r28597-0425664679 / LuCI (HEAD detached at 2ac26e56) branch 25.103.51521~2ac26e5

opkg update opkg install kmod-usb-net-cdc-ether usb-modeswitch
*restart, 2min waiting... Nowhere in the [Network] v [Interfaces] v [Add new interface]

USB LTE E3372H -320 Hilink modem (the most **** version of them without custom firmwares, root, scripts, TTL fixes ...), newest firmware 10.0.3.1 (h192sp2c983), webui 10.0.3.1 (W13SP3C7702). OK on the PC with smartphone's SIM, 192.168.8.1 default webgui, green led - connected LTE, SMS ok, but in the router it did not even appear in the GUI Interfaces.

dmesg

[ 4.079122]
[ 4.079122] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 4.095557] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 4.103476] hub 1-0:1.0: USB hub found
[ 4.108525] hub 1-0:1.0: 1 port detected
[ 4.124846] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[ 4.131918] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[ 4.140317] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[ 4.176844] hub 2-0:1.0: USB hub found
[ 4.181573] hub 2-0:1.0: 1 port detected
[ 4.198865] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.208270] init: - preinit -
[ 4.515374] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 7.250377] random: crng init done
[ 8.313618] 8021q: adding VLAN 0 to HW filter on device eth0
[ 10.096514] jffs2: notice: (459) jffs2_build_xattr_subsystem: complete building xattr subsystem, 35 of xdatum (3 unchecked, 26 orphan) and 39 of xref (13 dead, 15 orphan) found.
[ 10.114885] mount_root: switching to jffs2 overlay
[ 10.123341] overlayfs: upper fs does not support tmpfile.
[ 10.139074] urandom-seed: Seeding with /etc/urandom.seed
[ 10.268133] procd: - early -
[ 10.271457] procd: - watchdog -
[ 10.894353] procd: - watchdog -
[ 10.898826] procd: - ubus -
[ 11.058021] procd: - init -
[ 12.856887] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.576752] jitterentropy: Initialization failed with host not compliant with requirements: 9
[ 14.048041] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
[ 14.055797] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
[ 14.686254] mt76x2e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[ 14.692976] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[ 15.401807] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[ 15.432566] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[ 15.438211] mt76x2e 0000:01:00.0: Build: 1
[ 15.442461] mt76x2e 0000:01:00.0: Build Time: 201607111443____
[ 15.510572] mt76x2e 0000:01:00.0: Firmware running!
[ 15.515767] mt76x2e 0000:01:00.0: registering led 'mt76-phy0'
[ 15.523776] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.838134] PPP generic driver version 2.4.2
[ 15.881898] NET: Registered PF_PPPOX protocol family
[ 16.023159] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[ 16.031564] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
[ 16.040421] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 16.502510] jitterentropy: Initialization failed with host not compliant with requirements: 9
[ 17.391050] kmodloader: 1 module could not be probed
[ 17.396472] kmodloader: - jitterentropy_rng - 0
[ 62.769378] 8021q: adding VLAN 0 to HW filter on device eth0
[ 62.871528] br-lan: port 1(eth0.1) entered blocking state
[ 62.877088] br-lan: port 1(eth0.1) entered disabled state
[ 62.882732] eth0.1: entered allmulticast mode
[ 62.887200] mtk_soc_eth 10100000.ethernet eth0: entered allmulticast mode
[ 62.894558] eth0.1: entered promiscuous mode
[ 62.898954] mtk_soc_eth 10100000.ethernet eth0: entered promiscuous mode
[ 63.055644] br-lan: port 1(eth0.1) entered blocking state
[ 63.061274] br-lan: port 1(eth0.1) entered forwarding state
[ 74.482702] ieee80211 phy1: rt2800_rxiq_calibration: Warning - RXIQ calibration FAIL
[ 74.514450] br-lan: port 2(phy1-ap0) entered blocking state
[ 74.520335] br-lan: port 2(phy1-ap0) entered disabled state
[ 74.526165] rt2800_wmac 10180000.wmac phy1-ap0: entered allmulticast mode
[ 74.533575] rt2800_wmac 10180000.wmac phy1-ap0: entered promiscuous mode
[ 83.315231] ieee80211 phy1: rt2800_rxiq_calibration: Warning - RXIQ calibration FAIL
[ 83.351809] br-lan: port 2(phy1-ap0) entered blocking state
[ 83.357546] br-lan: port 2(phy1-ap0) entered forwarding state
[ 147.592279] urngd: v1.0.2 started.
[ 372.841600] usb 1-1: USB disconnect, device number 2
[ 376.004912] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 420.916573] usb 1-1: USB disconnect, device number 3
[ 421.967238] usb 1-1: new high-speed USB device number 4 using ehci-platform
root@OpenWrt:~#
[ 372.841600] usb 1-1: USB disconnect, device number 2
[ 376.004912] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 420.916573] usb 1-1: USB disconnect, device number 3
[ 421.967238] usb 1-1: new high-speed USB device number 4 using ehci-platform
[ 477.549452] usb 1-1: USB disconnect, device number 4
[ 501.098871] usb 1-1: new high-speed USB device number 5 using ehci-platform
[ 504.508730] usb 1-1: USB disconnect, device number 5
[ 505.108392] usb 1-1: new high-speed USB device number 6 using ehci-platform

lsusb

root@OpenWrt:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux 6.6.86 ehci_hcd EHCI Host Controller
Bus 001 Device 007: ID 12d1:14db HUAWEI_MOBILE HUAWEI_MOBILE
Bus 002 Device 001: ID 1d6b:0001 Linux 6.6.86 ohci_hcd Generic Platform OHCI controller

USB LTE E3372H -320 Hilink not working!( OpenWRT 24.10.1

acid8000 · 2025-04-23T09:22:24.503Z

I have now upgraded to 24.10.1 using Attended Sysupgrade and confirm having to change back from eth4 and eth5 to usb0 and usb1 for a couple of USB connected Raspberry Pi Zero devices to continue working. Essentially reversing a configuration change I made for my br-lan device with 24.10.

Note, I had to remove all Avahi related packages before Attended Sysupgrade would work on my x86/64 APU4D4, but I just reinstalled the ones I had manually after upgrading.

acid8000 · 2025-04-23T09:27:26.296Z

If you're remote, perhaps you could create a temporary bridge device containing both eth0 (exists on 24.10) and manually add usb0 (inexistent on 24.10) to it before upgrading, so that after upgrading to 24.10.1 things will still work? A bit risky playing around with that kinda thing from such a distance, though. I suspect that even just adding both devices to a bridge will break any current connections to it.

rmappleby · 2025-04-23T10:15:13.103Z

Thanks for confirming the reversion. Fortunately I only have a single device attached, so in my case I know that my change will be limited to my eth0 device changing back to usb0. So I just need to make a pretty simple text substitution in /etc/config/network and then trigger a reboot.

I started out wondering if I could add my own uci-defaults script, that only gets executed once after the reflash. But then it dawned on me I don't need anything that clever - I can just add some idempotent code into /etc/rc.local, make sure its preserved across the reflash, and it will be executed at the end of every reboot.

So I think I have a plan that doesn't involve a road trip - hooray!