OpenWrt 23.05.5 - Service Release

elatllat · 2024-09-26T01:12:05.377Z

Linksys EA8500 continues to work well with OpenWrt version 23.05.5.

timur.davletshin · 2024-09-26T04:00:20.666Z

Do we have bugtracker link so I can read more about it?

GetVladimir · 2024-09-26T04:36:12.633Z

If that is indeed the cause, it's not really a bug, as hardware offload usually works by offloading a lot of the NAT away from the CPU.

This also means that the offloaded traffic can't really be tracked or accounted as properly as before.

I don't know if there is an official bug tracker for it, but you can check the shortlog for the updates added since the previous version: https://git.openwrt.org/?p=openwrt/openwrt.git;a=shortlog;h=refs/tags/v23.05.5

Axxel · 2024-09-26T05:31:27.521Z

AP-only WAX202 upgrading via luci to 23.05.5 seems to fail to boot with my existing config. No WiFi networks, no response to the configured IPs on Ethernet. Using the reset button doesn't consistently work, 9 times out of 10 pressing the reset has main LED turn off instead of flashing orange to indicate a reset.

After a lot of power cycling I got a reset, and it boots to 23.05.5, but restoring my config backup takes it right back to the boot issue. A rollback to 23.05.4 with the same restored backup is working fine.

Not sure how to debug this, it seem like the thread thinks some packages are missing in the default 23.05.5 image for WAX202?

fkl7834456 · 2024-09-26T10:20:26.564Z

yes this is a large-scale failure, do not update through the selector yet

lleachii · 2024-09-26T10:45:00.244Z

You missed my post:

OpenWrt 23.05.5 - Service Release Release and security announcements

Same for the WAX202. I had to add kmod-mt7915-firmware to my Firmware Selector package recipe. These recipe changes should be noted somewhere.

Also see:

The OpenWrt Firmware Selector Release and security announcements

It's an issue specific with the firmware selector since the device packages are in the JSON responses, but they're not parsed correctly I guess. I also wrote about this at OpenWrt 23.05.5 - Service Release - #55 by dannil. Note the missing device packages in the list. [Screenshot_21]

axreios · 2024-09-26T13:01:14.210Z

23.05.5 failed to boot on my WRT1900ACS-mvebu-cortexa9 Linksys router after sysupgrade. The 26 Sept development release is up and running.

vortex-5 · 2024-09-26T13:04:59.346Z

Working great on WNDR4300v1 upgraded from 23.05.4

trinidude4 · 2024-09-26T13:32:57.266Z

Building my custom image for WRT32X went fine using the imagebuilder. I still have to test it, but there were no errors building it.

Compiling custom packages using the SDK had errors. I had to copy the files from feeds/base/package to feeds/base to get the custom package to compile. I haven't had time to look into it much, but I think it's related to commit 10cc5fc, but I'm not sure.

oauestad · 2024-09-26T14:54:17.198Z

Upgraded main router WRT1900ACS and 3x WSM20 APs via Attended Sysupgrade from 23.05.4 to 23.05.5.

All OK, no issues.

donjoe · 2024-09-26T15:00:29.864Z

Hello,

I know I'm stupid, but does the firmware selector issue discussed in this thread affect attended system upgrade? Is it safe to do ASU from Luci and expect it to generate a working image (as far as required packages go)?

brada4 · 2024-09-26T15:06:26.213Z

web ASU and not customized sysupgrade files from firmware-selector are ok.

knacht · 2024-09-26T17:06:45.488Z

Stable version installed via attended sys upgrade on Linksys EA8300.
Extras include full adblock and collectd with apcupsd for APC ups.
All is well after 24 hrs.
All wifi radios working well.

anon77964608 · 2024-09-26T17:22:20.726Z

upgraded960×282 39.6 KB

Xiaomi Mi 4A Gigabit Edition
No WiFi
Upgraded using firmware-selector and added my packages to the list
Will try the latest snapshot

Unsupported branch: SNAPSHOTS

mmm

EDIT: Downgrading the 23.05.4 then upgrading to 23.05.5 without any kind of package added (tried both ASU and firmware-selector) fixed the wifi issue.
I just installed all my packages using opkg and everything is still working.

donjoe · 2024-09-26T17:45:47.404Z

Just upgraded via ASU:

WRT3200ACM
D-Link DIR825B1
ZyXEL NWA50AX Pro

Can't immediately spot any issues.

Thanks again everyone involved for making this happen!

brada4 · 2024-09-26T17:53:27.826Z

I think pppoe offload started to work in 23.05.4 and now it does not update interim interface counters, like pppoe-wan and br-lan as packets are copied end to end.

efahl · 2024-09-26T18:47:54.318Z

donjoe:

but does the firmware selector issue discussed in this thread affect attended system upgrade?

To be completely clear about this...

There are four clients of the ASU server (which performs the builds for the clients):

Firmware Selector
LuCI Attended Sysupgrade
auc - up to and including all 23.05 releases, dropped in 24.10.
owut - which doesn't count because it's SNAPSHOT-only, will be included in 24.10.

The bug is in the Firmware Selector client only, not the ASU server and not in any of the other clients. It appears that aparcar merged a fix a few hours ago, but it has not made its way to either the production or staging servers, so there's no way to (easily) test it.

@mwarning Does your commit https://github.com/openwrt/firmware-selector-openwrt-org/commit/389605be2f026b3aa1d73844f4b1601b916da137 contain the fix for the missing default packages?

EDIT: add 24.10 updates

happydashery · 2024-09-26T21:42:34.297Z

Tested on my iPhone, getting much better speeds. No idea what I'm doing wrong from laptop but definitely a PICNIC moment. 23.05.5 working a treat on Flint 2 GL-MT6000

zandatsu07 · 2024-09-27T00:05:02.357Z

I have the same device, next time try to use attendedsysupgrade. I upgraded mine without any issues using attendedsysupgrade method

GetVladimir · 2024-09-27T02:25:21.422Z

Just to confirm, upgraded Xiaomi AX3200 from OpenWrt 23.05.3 to OpenWrt 23.05.5 using sysupgrade image and clean install (without keeping settings) and it seems to work properly.

I've used the standard sysupgrade image from the firmware selector here:
https://firmware-selector.openwrt.org/?version=23.05.5&target=mediatek%2Fmt7622&id=xiaomi_redmi-router-ax6s

Nothing customized, just the defaults and without keeping settings. Updated via Luci web interface and setup everything from beginning.

Network and WiFi seems to work properly.

Few things to note before doing the sysupgrade specific for the Xiaomi AX3200:

Login via SSH and check the partition boot table with:
hexdump /dev/mtd8 | head
It needs to start with 0000000 0dd0 edfe in order for the sysupgrade to work. If it starts with anything else, sysupgrade might brick the router
Check the boot flags in order to avoid the soft brick that can happen after every 6th reboot:
fw_printenv
It should have these options:

boot_fw0=run boot_rd_img;bootm
boot_fw1=run boot_rd_img;bootm
flag_try_sys1_failed=0
flag_try_sys2_failed=0

If it doesn't, follow this post to set them before doing the upgrade:
https://forum.openwrt.org/t/adding-openwrt-support-for-xiaomi-redmi-router-ax6s-xiaomi-router-ax3200/111085/1891

Big thanks again to the Developers for maintaining and updating OpenWrt and to the amazing community for providing help and support for users, and for sharing their experience