OpenWrt 23.05.2 - Service Release

[94121-usr]

Hi all

OpenWrt 23.05.0-rc3 - Third Release Candidate

Hi 23.05-rc3: Three MR8300, AP only, wired backhaul, 802.11r, wifi up/down works, no issues, works great. RPi4, router on a stick, still has kernel crash, using the following workaround in /etc/rc.local: /usr/sbin/ethtool -K eth0 rx off, otherwise it works great WRT1900ACSv2, using a configuration similar to #2, multiple bridged networks, it works great. However, if using a configuration similar to #3, multiple networks using VLANS, android phones acquires IPv6 addresses from other subnet.…

On the above link, I had reported that the multiple bridged network works, however with the upgrade to 23.05.2, I had noticed some 'weirdness' with the WRT1900ACSv2.

An ACER laptop (Win10) would crash. (TaskManager/Windows Explorer)
Android devices would not acquire an IPv6 address.
Both on the second bridge (wireless)

Switching boot partitions to the Master-r24238 (6.1.60 testing kernel), everything works (multiple vlans using bridge vlan filtering)

When you create another bridge under Network/Interfaces/Devices, the same MAC address will be used as the default BR-LAN bridge. After much exploring, change the MAC address (i.e. +1) on the new bridge, and everything works as expected.