OpenWrt 23.05.0-rc1 first release candidate

Archer C6 V3, it's been running for over an hour now, OK so far :slight_smile:

1 Like

That's not the HTTP server the u-boot is supposed to have.

ok, downgraded the TP-Link firmware to 2.0.1, can now ssh in and Barrier Breaker loaded.
scp the initramfs in /tmp and did a sysupgrade but no luck.

etc/uhttpd.crt

killall: watchdog: no process killed

/sbin/sysupgrade: eval: line 272: status_led_blink_preinit_regular: not found

Sending TERM to remaining processes ... nginx nginx portal_mgmt_mon ifstat-mini ipstat balance_loop cmxddnsd ntpd arpreq speedtest sys_monitor sleep omadad cloud-brd crond loggerd klogd sleep sleep sleep sleep netifd tddpd tmngtd ippoold dnsmasq improxy dnsproxyd ubusd queueventd uhttpd monitor pptpd xl2tpd online_check

Sending KILL to remaining processes ... ntpd

Switching to ramdisk...

/lib/ld-musl-mipsel.so.1: /sbin/snapshot: Not a valid dynamic program

Performing system upgrade...

Unlocking firmware ...

Writing from to firmware ...

Upgrade completed

Rebooting system...

so…
unable to change firmware to latest openwrt, and now can neither upgrade the TP-Link firmware neither! all upgrade fails in browser, and all upgrade via cli neither good!

device is now stuck with firmware version 2.0.1 from TP-Link

Also the web page loads now as WVR450G instead of ER605!!

This seems to be a chineese only device, are chineese dev doing wrong file definition in openwrt firmwares?

can I still safely use this device? NON upgradable, neither can I restored my configs unless manually!

Device bricked, only port 5 working.

help most welcome if anyone got a solution for me please.

thank you

Hey, just installed on mvebu-cortexa9-cznic_turris-omnia via custom image builder w/ a bunch of the less popular packages (e.g., chrony, gpsd, dump1090, lxc containers, etc) and ran it on my primary router for a day. The good news is that it runs as well as 22.03, which is also the bad news. Basically I suffer from a few of the iptables incompatibility issues w/ fwknopd, mwan3, and pbr (the latter two documented in Implementing policy routing in (or compatible with) mwan3) so I reverted to 21.02.

Also perhaps of interest is I recently acquired a mt7922 WiFi6 card (using the mt7921e driver). In 21.02 it doesn't have AP support but in 23.05 iw recognizes its features and LuCi will try to configure it as an AP w/ a 6GHz option. Unfortunately I suspect the driver is still not up to the task as the card eventually hangs as an AP with various options that ought to work, and badly enough that a reboot won't fix it -- it needs power cycled.

someone tested the mt7915e driver?

for me it seems to fail on Mochabin, I installed these packages and rebooted:

kmod-mt7915e, hostapd-openssl

but no wireless tab shows, when I check with lspci this is what I read:

root@OpenWrt:~# lspci
00:00.0 PCI bridge: Marvell Technology Group Ltd. 88F60x0/88F70x0/88F80x0/CN913x ARM SoC
01:00.0 Unclassified device [0002]: MEDIATEK Corp. MT7915E 802.11ax PCI Express Wireless Network Adapter

I did however read in the kernel log it asks for a mt7915 firmware image so I downloaded it but I still have to restart to check this.

for reference: this is a asiarf AW7915-NPD wireless card.

-edit-
its still unclassified, it works after I re-logged into luci so far the only change was this firmware image :slight_smile:

Installed the rc1 on a WRT3200ACM. Installation and reinstalling additional packages without problems. But a number of internal devices were not able anymore to open TLS connections to internet servers. Also port forwarding to internal reverse proxy failed, that might be the same problem. It's only TLS on port 443 causing problems. The device is unusable with this problem.
I will try another clean installation the next days. Went back to Fritzbox 4040 with 22.03 for now.

Hmm, maybe missing mbedtls packages or wrong luci-ssl? If opkg install still works (may not if mbedtls is borked), then try reinstalling the luci-ssl package and see if 443 comes back to life.

EDIT: Did I get that wrong? Do you mean 443 on the router itself? That's what above applies to...

This is why I predicted that I will never use attended-sysupgrade, at least in its current form. It just won't do what most people want.

I don't want to upgrade all my packages. I want default packages, plus X Y Z (and their dependencies) and while I am at it, minus A, B and C (to save some storage space/RAM/boot time).

What I do is I use the firmware configurator to edit the package list. I save my list of packages to include in the config (which is different than the list of all installed packages) for next time.

I'm glad 23.05 looks like the end of the purgatory for MV88E6176 devices which were stuck on 22.03.2 as their last stable release.

not sure if this is the "problems" thread however when installing snort3 (wrt32x) the router will crash and have to hard reset. This problem is also in development releases, thank you releasing this and all your continuous support!

Hi
No, it applies to TLS connection made from some internal devices to internet servers. I did try restarts, it didn't work. Switching back to the FB 4040 with 22.03 everything worked. I know it sounds weird. Maybe some conntrack problem?

Archer C6U (MT7621 + MT7603 + MT7613)

Running for 24 hours as dumb AP with no regressions.

Memory usage increased from 40 to 55 as expected.

Looking forward to the next RC's!

2 Likes

That's for sure. Are you going to chase it down? Maybe tcpdump -i eth0 port 443 would provide some insight (both on the working release, so you can get a sense for what's normal, then on the broken release to see what's different; gonna be a mess though, as there's always so much junk flowing on that port).

1 Like

Installed on newly purchased E8450. Running wired only with VLANs. Getting 935Mbps. Very happy. Many thanks to all.

2 Likes

Hi,
tried 23.05.0-rc1 on ZTE MF289F > it´working so far, expect WLAN:
I see only Qualcomm Atheros IPQ4019 802.11ac/n device, but not the 2,5Ghz device. Seems something is crashing in ath10k.

[   18.971532] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[   18.971602] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   18.983435] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[   19.043011] ath10k_ahb a000000.wifi: Loading BDF type 0
[   19.189522] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 d140cd7d
[   21.517514] ath10k_ahb a000000.wifi: failed to receive control response completion, polling..
[   22.557323] ath10k_ahb a000000.wifi: ctl_resp never came in (-110)
[   22.557706] ath10k_ahb a000000.wifi: failed to connect to HTC: -110
[   22.616399] ------------[ cut here ]------------
[   22.616450] WARNING: CPU: 2 PID: 9 at kernel/workqueue.c:3084 __flush_work+0x2d8/0x310
[   22.620107] Modules linked in: ath10k_pci(+) ath10k_core ath xt_state xt_conntrack wireguard usb_wwan qmi_wwan pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_compat nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 libchacha20poly1305 iptable_mangle iptable_filter ipt_REJECT ipt_ECN ip_tables curve25519_neon cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY x_tables usbserial usbnet slhc sch_cake poly1305_arm nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcurve25519_generic libcrc32c hwmon crc_ccitt compat chacha_neon cdc_wdm sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic
[   22.620579]  act_skbedit act_mirred act_gact ip6_gre ip_gre gre ifb ip6_tunnel tunnel6 ip_tunnel vxlan udp_tunnel ip6_udp_tunnel sha512_arm ghash_arm_ce cmac leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug mii crc32c_generic
[   22.715428] CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 5.15.113 #0
[   22.737638] Hardware name: Generic DT based system
[   22.744063] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
[   22.748673] [<c030d488>] (unwind_backtrace) from [<c030986c>] (show_stack+0x10/0x14)
[   22.755525] [<c030986c>] (show_stack) from [<c0602da0>] (dump_stack_lvl+0x40/0x4c)
[   22.763251] [<c0602da0>] (dump_stack_lvl) from [<c032274c>] (__warn+0x8c/0x100)
[   22.770628] [<c032274c>] (__warn) from [<c0322828>] (warn_slowpath_fmt+0x68/0x78)
[   22.777834] [<c0322828>] (warn_slowpath_fmt) from [<c033c9a8>] (__flush_work+0x2d8/0x310)
[   22.785474] [<c033c9a8>] (__flush_work) from [<c033cb9c>] (__cancel_work_timer+0xe0/0x1d0)
[   22.793631] [<c033cb9c>] (__cancel_work_timer) from [<bf4ce350>] (ath10k_htc_stop_hl+0x18/0x4c [ath10k_core])
[   22.801831] [<bf4ce350>] (ath10k_htc_stop_hl [ath10k_core]) from [<bf4d7010>] (ath10k_htt_tx_free+0x14/0x48 [ath10k_core])
[   22.811782] [<bf4d7010>] (ath10k_htt_tx_free [ath10k_core]) from [<bf4cae54>] (ath10k_core_start+0xb0c/0x15b8 [ath10k_core])
[   22.822720] [<bf4cae54>] (ath10k_core_start [ath10k_core]) from [<bf4cc75c>] (ath10k_core_register_work+0x638/0xb74 [ath10k_core])
[   22.834088] [<bf4cc75c>] (ath10k_core_register_work [ath10k_core]) from [<c033b608>] (process_one_work+0x210/0x478)
[   22.845634] [<c033b608>] (process_one_work) from [<c033c184>] (worker_thread+0x4c/0x598)
[   22.855958] [<c033c184>] (worker_thread) from [<c0342b08>] (kthread+0x148/0x164)
[   22.864292] [<c0342b08>] (kthread) from [<c0300110>] (ret_from_fork+0x14/0x24)
[   22.871668] Exception stack(0xc1061fb0 to 0xc1061ff8)
[   22.878699] 1fa0:                                     00000000 00000000 00000000 00000000
[   22.883829] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   22.891986] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   22.900189] ---[ end trace 93d8523097d51500 ]---
[   22.906579] ------------[ cut here ]------------
[   22.911419] WARNING: CPU: 2 PID: 9 at kernel/workqueue.c:3084 __flush_work+0x2d8/0x310
[   22.916027] Modules linked in: ath10k_pci(+) ath10k_core ath xt_state xt_conntrack wireguard usb_wwan qmi_wwan pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_compat nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 libchacha20poly1305 iptable_mangle iptable_filter ipt_REJECT ipt_ECN ip_tables curve25519_neon cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY x_tables usbserial usbnet slhc sch_cake poly1305_arm nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcurve25519_generic libcrc32c hwmon crc_ccitt compat chacha_neon cdc_wdm sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic
[   22.916501]  act_skbedit act_mirred act_gact ip6_gre ip_gre gre ifb ip6_tunnel tunnel6 ip_tunnel vxlan udp_tunnel ip6_udp_tunnel sha512_arm ghash_arm_ce cmac leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug mii crc32c_generic
[   23.011343] CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G        W         5.15.113 #0
[   23.033561] Hardware name: Generic DT based system
[   23.041369] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
[   23.045977] [<c030d488>] (unwind_backtrace) from [<c030986c>] (show_stack+0x10/0x14)
[   23.052833] [<c030986c>] (show_stack) from [<c0602da0>] (dump_stack_lvl+0x40/0x4c)
[   23.060559] [<c0602da0>] (dump_stack_lvl) from [<c032274c>] (__warn+0x8c/0x100)
[   23.067936] [<c032274c>] (__warn) from [<c0322828>] (warn_slowpath_fmt+0x68/0x78)
[   23.075140] [<c0322828>] (warn_slowpath_fmt) from [<c033c9a8>] (__flush_work+0x2d8/0x310)
[   23.082782] [<c033c9a8>] (__flush_work) from [<c033cb9c>] (__cancel_work_timer+0xe0/0x1d0)
[   23.090940] [<c033cb9c>] (__cancel_work_timer) from [<bf4ce360>] (ath10k_htc_stop_hl+0x28/0x4c [ath10k_core])
[   23.099107] [<bf4ce360>] (ath10k_htc_stop_hl [ath10k_core]) from [<bf4d7010>] (ath10k_htt_tx_free+0x14/0x48 [ath10k_core])
[   23.109089] [<bf4d7010>] (ath10k_htt_tx_free [ath10k_core]) from [<bf4cae54>] (ath10k_core_start+0xb0c/0x15b8 [ath10k_core])
[   23.120027] [<bf4cae54>] (ath10k_core_start [ath10k_core]) from [<bf4cc75c>] (ath10k_core_register_work+0x638/0xb74 [ath10k_core])
[   23.131398] [<bf4cc75c>] (ath10k_core_register_work [ath10k_core]) from [<c033b608>] (process_one_work+0x210/0x478)
[   23.142942] [<c033b608>] (process_one_work) from [<c033c184>] (worker_thread+0x4c/0x598)
[   23.153267] [<c033c184>] (worker_thread) from [<c0342b08>] (kthread+0x148/0x164)
[   23.161601] [<c0342b08>] (kthread) from [<c0300110>] (ret_from_fork+0x14/0x24)
[   23.168976] Exception stack(0xc1061fb0 to 0xc1061ff8)
[   23.176009] 1fa0:                                     00000000 00000000 00000000 00000000
[   23.181136] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   23.189295] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   23.197484] ---[ end trace 93d8523097d51501 ]---
[   23.204055] ath10k_ahb a000000.wifi: could not init core (-110)
[   23.208999] ath10k_ahb a000000.wifi: could not probe fw (-110)
[   24.170752] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[   24.170825] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   24.184187] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[   24.242187] ath10k_ahb a800000.wifi: Loading BDF type 0
[   24.254223] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:21 crc32 d140cd7d
[   25.550926] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   25.551005] ath10k_ahb a800000.wifi: msdu-desc: 2500  skid: 32
[   25.600122] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   25.601889] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[   25.741679] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
[   25.909531] ath: EEPROM regdomain: 0x0
[   25.909610] ath: EEPROM indicates default country code should be used
[   25.909617] ath: doing EEPROM country->regdmn map search
[   25.909626] ath: country maps to regdmn code: 0x3a
[   25.909634] ath: Country alpha2 being used: US
[   25.909641] ath: Regpair used: 0x3a

maybe someone can have a look into this issue.
br
chris

I rechecked the config and don't see problems.
Testing my site with connection tester from outside showed the call on port 80 with the redirect 301 in the reverse proxy's log. But no connection from outside on port 443 comes through.
I will do an deeper analysis on the fw4 rules.
Maybe something caused by mhttp sitting on port 443?

Thanks to the developers.
Works so far on x86 (Router) + dir-1960(mt7621, as AP), both had no issues with restoring the 22.03 config files.

Nice work, but I think this commit should land before final version, or there would be a serious wireless speed problem on mt76 AX devices: https://github.com/openwrt/mt76/pull/768

5 Likes

Successfully upgraded a WRT1900ACS here, running well so far.
On my debian 11, freshly upgraded to 12.0, I was missing python3-distutils dependency to be able to run image-builder.

thanks openwrt team