OpenWrt 22.03.5 fifth service release

spence · 2023-05-06T14:14:55.654Z

ray308:

there is apparently no package for dns-https-proxy for 22.03.5...

Is luci-app-https-dns-proxy and https-dns-proxy what you are looking for?

luci-app-https-dns-proxy - 2022-10-15-11 - Provides Web UI for DNS Over HTTPS Proxy
https-dns-proxy - 2022-10-15-11 - Light-weight DNS-over-HTTPS, non-caching translation proxy for the RFC 8484 DoH standard. It receives regular (UDP) DNS requests and resolves them via DoH resolver. Please see https://docs.openwrt.melmac.net/https-dns-proxy/ for more information.

ray308 · 2023-05-06T14:27:55.966Z

Yes, I spelled it wrong ;-). But the problem is that from version .4 to .5 it's not working for some reason.
I'll check it out when I find the time.

spence · 2023-05-06T14:30:39.874Z

Remember to do opkg update before attempting to search for or install a package. :-)

goppinath · 2023-05-06T14:32:17.929Z

@CakeConnoisseur At least I can confirm that updating from 22.03.3 to 22.03.4 worked successfully on an RPi 4 and an RPi Compute Module 4. The issue should be either in 22.03.4 or in 22.03.5.

Wallbanger · 2023-05-06T14:36:47.883Z

Cudy WR1300 Upgrade including settings from 22.03.3 without issues.

hnyman · 2023-05-07T05:41:23.843Z

2 posts were merged into an existing topic: Belkin RT3200/Linksys E8450 WiFi AX discussion

bibibu99 · 2023-05-07T07:12:03.268Z

I have installed OpenWRT on my brand-new Belkin RT3200 router. The installation and configuration of VPN/RBS took less than 15 minutes. I am really happy. Thank you very much for all your hard work!

eginnc · 2023-05-08T00:31:24.212Z

22.03.5 installed on Askey RT4230W REV6 (ipq8065).

Issues:

5 GHz txpower is now limited to 23 dBm with country code set to US. Previously txpower up to 30 dBm was supported on this device (allowed in US for U-NII-1 and U-NII-3).

Fremont · 2023-05-08T17:00:23.079Z

I upgrade to version 22.03.5 on 12 devices today, of different types (routers, switches) and brands, and everything went well.

Thank you very much for the very good work!!!

andre991 · 2023-05-08T17:44:00.440Z

Do you know if it's possible to add the compatibility in TPLink Archer Ax6000 V1?

odrt · 2023-05-08T21:54:45.219Z

andre991:

Archer Ax6000 V1

Please continue to read more about OpenWrt on Broadcom devices like TP-Link Archer AX6000 v1 here:

TP-Link Archer AX6000 V1 releases GPL Code
https://openwrt.org/meta/infobox/broadcom_wifi

97gerard_216 · 2023-05-10T08:40:03.751Z

Hello,

Totolink X5000R, Installation 22.03.5,not possible with LuCI Attendedsysupgrade.

Downloading Firmware from server to browser, but installing browser to router does not work. The router does not receive any information, the lights do not flash.

Firmware download, SHA-256 verification.
On installation, without keeping the configuration, display of the red banner, I checked "Force installation if verification of the image is compliant". The lights are flashing. After installation, I no longer have access to LuCI.

Installing luci-ssl with PuTTy, I found that version 22.03.5 was installed.

With LuCI, I restored my configuration. X500R is operational.

Apart from this little incident, thank you for the wonderful work you are doing.

Have a nice day

AJCxZ0 · 2023-05-11T02:01:17.001Z

TP-LINK Archer C2600 v1 (which still shows links to 22.03.3) and two Archer A7s updated using Luci from 22.03.3 with settings kept, missing packages installed and devices rebooted.
So far all appears to be working normally.

Thanks again to all who do the work to make this not just possible, but easy.

Dock · 2023-05-12T10:58:47.611Z

Been using sysupgrade for upgrading Sitecom WLR-7100, WLR-8100 (v1 and v2) from 22.03.4 to 22.03.5 with settings preserved.

So far no issues (four days running). Thanks for the continued support of these Sitecom devices!

rygle · 2023-05-12T12:09:01.880Z

eehmke:

Linksys WRT3200ACM still not available at all? Have to use the snapshot.

There are bugs with the switch acting like a hub on a bunch of devices including many of the Linksys WRT devices that are fine with the 5.15 kernel in the snapshots and the upcoming 23.x, but the 5.10 kernel in the 22.3.x releases had a bug that nobody has fully gotten to the bottom of yet and from what I've read as 5.15 kernels are known to fix it and are about ready to go live soon in 23.x nobody is willing to put in massive effort to fix something that week be fixed very soon (next month probably) by the next major release.

wolfgangrupprecht · 2023-05-12T17:29:56.827Z

Installed on a Netgear WNDR3700 v4 and Linksys E8450 (UBI) with both configured as dumb AP's. It works flawlessly at boot and for a few days. After that an android phone gets stuck at the "obtaining IP address" phase of connecting to the netgear. Since the netgear router is just a dumb AP it requires a network connection back to the main router, which didn't happen. Unfortunately the netgear router was needed so I didn't have time to investigate more. The fact that it only happened on the netgear and not the identically configured linksys made me wonder if I should have quickly checked the memory used. The netgear has a lot less than the linksys and any leak would show up there first.

jbrossard · 2023-05-12T21:26:10.186Z

rygle:

There are bugs with the switch acting like a hub on a bunch of devices including many of the Linksys WRT devices that are fine with the 5.15 kernel in the snapshots and the upcoming 23.x, but the 5.10 kernel in the 22.3.x releases had a bug that nobody has fully gotten to the bottom of yet and from what I've read as 5.15 kernels are known to fix it and are about ready to go live soon in 23.x nobody is willing to put in massive effort to fix something that week be fixed very soon (next month probably) by the next major release.

While this is true there is a bug with the snapshot builds where software flow offload in firewall (an experimental feature) is broken on mevbu systems. Make sure that option isn't checked and the snapshot will work fine.

github.com/openwrt/openwrt

Comment by borkra to kernel: mvebu: add Linux 5.15 support

openwrt:master ← rsalvaterra:mvebu-515

Flow offload is broken on this, NAT does not let ethernet ipv4 packets through w…hen enabled.

rygle · 2023-05-12T23:31:18.733Z

Good to know. Thanks to all our devs who are doing amazing work!

_Searcher · 2023-05-13T12:20:19.807Z

Some update for DIR-885L HW A1: I have switched to this FW Version: 10.10.122.45 CRC: 964bc676 Date: Wed 2017-05-31
md5sum ./brcmfmac4366b-pcie.bin 92d1baab27d88b3ff1c9b9a39c33b0b4
from here:

github.com

hurrian/ea9500_openwrt/blob/master/package/brcmfmac-firmware-4366b1-pcie-panamera/files/brcmfmac4366b-pcie.bin

This file is binary. show original

and it looks pretty stable and better than any one from Openwrt repos.

Pico · 2023-05-13T13:00:53.111Z

Your dir-885 custom firmware engagement is awesome.
But if you are interested in maintaining currated news about custom builds of the dir-885, my recommendation would be, you open up a new dedicated thread e.g. „dir-885 custom builds“ in the community builds section of the forum.

That would give such dir-885 custom firmware news some needed structure instead of occasional „look here, I found something new“ shotgun postings in various threads. Users are aware to search for a device via Google, Wiki or forum search and would eventually find such a thread, in case you are worrying that people might miss your news.