Sure. Couldn't find where to PM to. Could you write me sth, please?
Because you just joined 30 minutes ago.
SSH in to the router and run cat /etc/config/firewall
Post the results in preformatted text, by using the icon highlighted in red...
Repeat that process for the fw4 flush and fw4 start results.
1 Like
Or just mail him, you'll find the address in the git repos, e.g. https://github.com/openwrt/luci/commit/180d39dcd2427e3c32c0ec7ecc3c7bfb48c0d0ab.
1 Like
i'd prefer not to share it right here. There's no errors and i see created rules. But it starts working only if i flush all rules and add nat postrouting masquerade manually. The errors i see while trying fw4 upgrade: The installed version of package ucode is not compatible, require > = 2022-03-22 while 2022-02-11-a29bad94-1 is installed.
Easy to fix with:
opkg update && opkg install libucode20220322
1 Like
upgraded two devices, R7800 and NBG6817, configuration kept on both.
Up and running fine till now, but, as mentioned before, problems arise with package updates of fw4. It requires an older version of ucode.
Installing libucode_20220322 doesn't solve the problem.
New installation on D-Link DIR-2660-A1 with following warns. :-
Any idea what this warning for??
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 0.182625] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 0.304964] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 0.424137] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 3.865178] This architecture does not have kernel memory protection.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 5.492844] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 5.507881] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator
logread | grep -i fail && logread | grep -i err && logread | grep -i warn
Wed Apr 20 10:37:43 2022 kern.err kernel: [ 2.068639] mt7621-pci 1e140000.pcie: Parsing DT failed
Wed Apr 20 10:37:43 2022 kern.err kernel: [ 2.420840] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22
Wed Apr 20 10:37:43 2022 kern.info kernel: [ 3.235803] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Wed Apr 20 10:37:43 2022 kern.info kernel: [ 3.262850] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
Wed Apr 20 10:38:01 2022 daemon.err odhcpd[1807]: Failed to send to ff02::1%lan@br-lan (Address not available)
Wed Apr 20 10:38:02 2022 daemon.err odhcpd[1807]: Failed to send to ff02::1%lan@br-lan (Address not available)
Wed Apr 20 10:38:02 2022 daemon.err odhcpd[1807]: Failed to send to fe80::3736:d000:376:65dd%lan@br-lan (Address not available)
Wed Apr 20 10:38:03 2022 daemon.err odhcp6c[2630]: Failed to send RS (Address not available)
Wed Apr 20 10:38:03 2022 daemon.err odhcp6c[2630]: Failed to send SOLICIT message to ff02::1:2 (Address not available)
Wed Apr 20 10:37:43 2022 kern.info kernel: [ 0.000000] Writing ErrCtl register=00026210
Wed Apr 20 10:37:43 2022 kern.info kernel: [ 0.000000] Readback ErrCtl register=00026210
Wed Apr 20 10:37:43 2022 kern.err kernel: [ 2.068639] mt7621-pci 1e140000.pcie: Parsing DT failed
Wed Apr 20 10:37:43 2022 kern.err kernel: [ 2.316068] rt2880-pinmux pinctrl: pcie is already enabled
Wed Apr 20 10:37:43 2022 kern.err kernel: [ 2.420840] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22
Wed Apr 20 10:37:43 2022 kern.err kernel: [ 2.657661] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
Wed Apr 20 10:38:01 2022 daemon.err odhcpd[1807]: Failed to send to ff02::1%lan@br-lan (Address not available)
Wed Apr 20 10:38:02 2022 daemon.err odhcpd[1807]: Failed to send to ff02::1%lan@br-lan (Address not available)
Wed Apr 20 10:38:02 2022 daemon.err odhcpd[1807]: Failed to send to fe80::3736:d000:376:65dd%lan@br-lan (Address not available)
Wed Apr 20 10:38:03 2022 daemon.err odhcp6c[2630]: Failed to send RS (Address not available)
Wed Apr 20 10:38:03 2022 daemon.err odhcp6c[2630]: Failed to send SOLICIT message to ff02::1:2 (Address not available)
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 0.182625] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 0.304964] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 0.424137] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 3.865178] This architecture does not have kernel memory protection.
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 5.492844] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator
Wed Apr 20 10:37:43 2022 kern.warn kernel: [ 5.507881] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator
Wed Apr 20 10:37:43 2022 user.warn kernel: [ 11.549317] urandom-seed: Seed file not found (/etc/urandom.seed)
Wed Apr 20 10:37:43 2022 kern.notice kernel: [ 13.867666] random: 7 urandom warning(s) missed due to ratelimiting
Wed Apr 20 10:37:44 2022 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Upgraded TP-Link C2600 and Zyxel NBG6616 - both with no problems. Only basic testing though
@tboege I had problems on my C2600 starting around v 20 and eventually went back to the stock firmware which is woefully out of date.
I'd be interested to hear back from you in a week or 2 as to whether the RC version is working fine with no restarts or wifi issues.
Do you know an estimated 'installed size difference' between this release and 21.02.3?
No, I did nok look before I installed:
luci-app-statistics
collectd-mod-uptime
after that the free space is:
dev/root 4.0M 4.0M 0 100% /rom
tmpfs 233.1M 2.0M 231.2M 1% /tmp
/dev/mtdblock13 21.0M 1.2M 19.8M 6% /overlay
overlayfs:/overlay 21.0M 1.2M 19.8M 6% /
tmpfs 512.0K 0 512.0K 0% /dev
I will try to rember. If I forget, send a pm
That's OK got it...
it looks like the initial TP-Link C2600 /overlay free space has shrunk from 21.4M to 21.0M ?
Hey everyone, I've updated successfully on a couple of devices. (no luci though)
tplink tl-wdr4900-v2 (ath79)
tplink c2600 (ipq806x)
netgear r7800 (ipq806x)
totolink x5000r (ramips/mt7621)
@Sebbo the Totolink supports WLAN 6 on two bands.
1 Like
Hi,
Upgraded here a WRT1900ACS v1 from 21.02.3 with config preserved, everything run well for about a week.
Thanks Openwrt team
1 Like
Tried with traffic rule, but it does not work as expected.
Now I am desperately needed a way to get the same result, with nftables.
Hi, did you have any problems by switching to nftables?