OpenWrt 21.02.3 Third service release

This is why I never use those. I stick to the original drivers.

I swapped out my cable modem, and splitter leading to the cable modem. No more disconnections have appeared in about 24 hours, so I am considering this issue solved and not related to the firmware.

1 Like

Many imagebuilder packages do not contain a profiles folder...

make info does not show any profile:

Current Target: "ath79/generic"
Current Revision: "r16554-1d4dea6d4f"
Default Packages: base-files ca-bundle dropbear fstools libc libgcc libustream-wolfssl logd mtd netifd opkg uci uclient-fetch urandom-seed urngd busybox procd kmod-gpio-button-hotplug swconfig kmod-ath9k uboot-envtools wpad-basic-wolfssl dnsmasq firewall ip6tables iptables kmod-ipt-offload odhcp6c odhcpd-ipv6only ppp ppp-mod-pppoe
Available Profiles:

make manifest yields an error:

Profile "linksys_wrt3200acm" does not exist!
Use "make info" to get a list of available profile names.
make[1]: *** [Makefile:216: _check_profile] Error 1
make: *** [Makefile:249: manifest] Error 2

Is this an error? Or did I miss something? Thanks!

With TP-Link AC2600 things were fine after the upgrade. But I pushed the reset button accidentally which caused 5GHz wify to become stuck in disable mode and no restarting or configuration helped.

I removed the network from luci, then configured again and it started to work. If that matters, I used 60th channel with 80MHz width.

Release notes at https://openwrt.org/releases/22.03/notes-22.03.0-rc1 say:

OpenWrt 22.03.0-rc1 - First Release Candidate - 24 April 2021

Should this be 24 April 2022 ?

1 Like

Sure an error !!!

Tested on Belkin RT3200. Basic use. Works.

1 Like

On TP-Link Archer A7 v5, when I scan wifi (using either "iw wlan0 scan" or luci wifi interface scan), the kernel logs a firmware crash for ath10k_pci. I'm pretty sure that didn't happen prior to this point release.

[1699538.162439] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699538.264859] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699538.367246] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699538.469646] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699538.572035] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699538.674457] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699538.776842] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699538.879254] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699538.981664] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.084058] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.186459] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.288848] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.391266] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.493665] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.596208] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.698466] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.800866] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699539.903286] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.005661] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.108075] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.210476] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.312864] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.415272] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.517665] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.620066] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.722476] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.824864] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699540.927272] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.029696] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.132084] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.234477] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.311471] ath10k_pci 0000:00:00.0: Cannot communicate with firmware, previous wmi cmds: 36904:424813344 36954:424813344 36904:424813326 36954:424813301, jiffies: 424814144, attempting to fake crash and restart firmware, dev-flags: 0x42
[1699541.333485] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -11
[1699541.341872] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.350285] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.358137] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.366660] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.375170] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.383730] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.392158] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.400678] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.409216] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.418150] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.426652] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.435153] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.443615] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.451623] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.460146] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -143
[1699541.471941] ath10k_pci 0000:00:00.0: failed to send wmi nop: -143
[1699541.478626] ath10k_pci 0000:00:00.0: could not request stats (type -268435456 ret -143 specifier 1)
[1699541.488248] ath10k_pci 0000:00:00.0: failed to submit wmi echo: -143
[1699541.495034] ath10k_pci 0000:00:00.0: failed to ping firmware: -143
[1699541.501769] ath10k_pci 0000:00:00.0: failed to install key for vdev 0 peer [redacted]: -143
[1699541.511373] wlan0: failed to remove key (0, [redacted]) from hardware (-143)
[1699541.520047] ath10k_pci 0000:00:00.0: firmware crashed! (guid [redacted])
[1699541.529641] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[1699541.539448] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[1699541.549292] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.559827] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f
[1699541.591535] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[1699541.599371] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[1699541.609513] ath10k_pci 0000:00:00.0: firmware register dump:
[1699541.615613] ath10k_pci 0000:00:00.0: [00]: 0x00940750 0x00400C00 0x00980000 0x009AF0DC
[1699541.624009] ath10k_pci 0000:00:00.0: [04]: 0x009AF148 0x009AF264 0x00941B6C 0x00941B20
[1699541.632448] ath10k_pci 0000:00:00.0: [08]: 0x00941B00 0x009423A4 0x009422DC 0x009422C4
[1699541.640864] ath10k_pci 0000:00:00.0: [12]: 0x00941B90 0x009423F4 0x009423D4 0x009423DC
[1699541.649294] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.657234] ath10k_pci 0000:00:00.0: [16]: 0x009423E4 0x009423EC 0x00942888 0x00942520
[1699541.665725] ath10k_pci 0000:00:00.0: [20]: 0x009424FC 0x0094241C 0x00942540 0x00942498
[1699541.674208] ath10k_pci 0000:00:00.0: [24]: 0x00942450 0x0094250C 0x009424D0 0x00942750
[1699541.682611] ath10k_pci 0000:00:00.0: [28]: 0x00942798 0x00942844 0x009428C4 0x00942594
[1699541.690999] ath10k_pci 0000:00:00.0: [32]: 0x0094258C 0x00942C28 0x00942F4C 0x00942F7C
[1699541.699507] ath10k_pci 0000:00:00.0: [36]: 0x00942F90 0x00942FE4 0x00942FF8 0x00943040
[1699541.707975] ath10k_pci 0000:00:00.0: [40]: 0x0094077C 0x00940790 0x00943084 0x00942F00
[1699541.716457] ath10k_pci 0000:00:00.0: [44]: 0x009AF290 0x00942A80 0x00942D40 0x00942D64
[1699541.725086] ath10k_pci 0000:00:00.0: [48]: 0x00942D78 0x00942D9C 0x00957E18 0x00957E28
[1699541.733718] ath10k_pci 0000:00:00.0: [52]: 0x00957E20 0x00940788 0x009430EC 0x00000000
[1699541.742154] ath10k_pci 0000:00:00.0: [56]: 0x00000000 0x00000000 0x00000000 0x00000000
[1699541.750581] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.758448] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[1699541.764887] ath10k_pci 0000:00:00.0: [00]: 0x00057400   8   8   3   3
[1699541.771766] ath10k_pci 0000:00:00.0: [01]: 0x00057800  29  29 447 448
[1699541.778628] ath10k_pci 0000:00:00.0: [02]: 0x00057c00  18  18  81  82
[1699541.785474] ath10k_pci 0000:00:00.0: [03]: 0x00058000  15  15  15  15
[1699541.792317] ath10k_pci 0000:00:00.0: [04]: 0x00058400 6969 6969 198 158
[1699541.799340] ath10k_pci 0000:00:00.0: [05]: 0x00058800   6   6  69  70
[1699541.806186] ath10k_pci 0000:00:00.0: [06]: 0x00058c00   2   2   2   2
[1699541.813031] ath10k_pci 0000:00:00.0: [07]: 0x00059000   0   0   0   0
[1699541.820133] ath10k_pci 0000:00:00.0: debug log header, dbuf: 0x411ac0  dropped: 0
[1699541.828145] ath10k_pci 0000:00:00.0: [0] next: 0x411aa8 buf: 0x40fefc sz: 1500 len: 704 count: 44 free: 0
[1699541.838583] ath10k_pci 0000:00:00.0: ath10k_pci ATH10K_DBG_BUFFER:
[1699541.845327] ath10k: [0000]: 64E1BA07 204CFC0B 08000000 0B000000 78E1BA07 204CFC0B 08000000 0B000000
[1699541.854938] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.862930] ath10k: [0008]: 8DE1BA07 204CFC0B 08000000 0B000000 A1E1BA07 204CFC0B 08000000 0B000000
[1699541.872549] ath10k: [0016]: B6E1BA07 204CFC0B 08000000 0B000000 CAE1BA07 204CFC0B 08000000 0B000000
[1699541.882173] ath10k: [0024]: DFE1BA07 204CFC0B 08000000 0B000000 F3E1BA07 204CFC0B 08000000 0B000000
[1699541.891722] ath10k: [0032]: 08E2BA07 204CFC0B 08000000 0B000000 1CE2BA07 204CFC0B 08000000 0B000000
[1699541.901385] ath10k: [0040]: 31E2BA07 204CFC0B 08000000 0B000000 45E2BA07 204CFC0B 08000000 0B000000
[1699541.911002] ath10k: [0048]: 5AE2BA07 204CFC0B 08000000 0B000000 6EE2BA07 204CFC0B 08000000 0B000000
[1699541.920639] ath10k: [0056]: 83E2BA07 204CFC0B 08000000 0B000000 97E2BA07 204CFC0B 08000000 0B000000
[1699541.930252] ath10k: [0064]: ACE2BA07 204CFC0B 08000000 0B000000 C0E2BA07 204CFC0B 08000000 0B000000
[1699541.939940] ath10k: [0072]: D5E2BA07 204CFC0B 08000000 0B000000 E9E2BA07 204CFC0B 08000000 0B000000
[1699541.949618] ath10k: [0080]: FEE2BA07 204CFC0B 08000000 0B000000 12E3BA07 204CFC0B 08000000 0B000000
[1699541.959227] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699541.967152] ath10k: [0088]: 27E3BA07 204CFC0B 08000000 0B000000 3BE3BA07 204CFC0B 08000000 0B000000
[1699541.976803] ath10k: [0096]: 50E3BA07 204CFC0B 08000000 0B000000 64E3BA07 204CFC0B 08000000 0B000000
[1699541.986440] ath10k: [0104]: 79E3BA07 204CFC0B 08000000 0B000000 8DE3BA07 204CFC0B 08000000 0B000000
[1699541.996095] ath10k: [0112]: A2E3BA07 204CFC0B 08000000 0B000000 B6E3BA07 204CFC0B 08000000 0B000000
[1699542.005728] ath10k: [0120]: CBE3BA07 204CFC0B 08000000 0B000000 DFE3BA07 204CFC0B 08000000 0B000000
[1699542.015396] ath10k: [0128]: F4E3BA07 204CFC0B 08000000 0B000000 08E4BA07 204CFC0B 08000000 0B000000
[1699542.025130] ath10k: [0136]: 1DE4BA07 204CFC0B 08000000 0B000000 31E4BA07 204CFC0B 08000000 0B000000
[1699542.034752] ath10k: [0144]: 46E4BA07 204CFC0B 08000000 0B000000 5AE4BA07 204CFC0B 08000000 0B000000
[1699542.044362] ath10k: [0152]: 6FE4BA07 204CFC0B 08000000 0B000000 83E4BA07 204CFC0B 08000000 0B000000
[1699542.053970] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699542.061788] ath10k: [0160]: 98E4BA07 204CFC0B 08000000 0B000000 ACE4BA07 204CFC0B 08000000 0B000000
[1699542.071466] ath10k: [0168]: C1E4BA07 204CFC0B 08000000 0B000000 D5E4BA07 204CFC0B 08000000 0B000000
[1699542.081071] ath10k_pci 0000:00:00.0: ATH10K_END
[1699542.086067] ath10k_pci 0000:00:00.0: [1] next: 0x411ac0 buf: 0x40f90c sz: 1500 len: 112 count: 7 free: 0
[1699542.096223] ath10k_pci 0000:00:00.0: ath10k_pci ATH10K_DBG_BUFFER:
[1699542.102948] ath10k: [0000]: 65E5BA07 204CFC0B 08000000 0B000000 79E5BA07 204CFC0B 08000000 0B000000
[1699542.112563] ath10k: [0008]: 8EE5BA07 204CFC0B 08000000 0B000000 A2E5BA07 204CFC0B 08000000 0B000000
[1699542.122198] ath10k: [0016]: B7E5BA07 204CFC0B 08000000 0B000000 CBE5BA07 204CFC0B 08000000 0B000000
[1699542.131793] ath10k: [0024]: E0E5BA07 204CFC0B 08000000 0B000000
[1699542.138187] ath10k_pci 0000:00:00.0: ATH10K_END
[1699542.155737] ath10k_pci 0000:00:00.0: cipher 0 is not supported
[1699542.161999] ath10k_pci 0000:00:00.0: failed to remove peer wep key 0: -122
[1699542.169354] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699542.177319] ath10k_pci 0000:00:00.0: failed to clear all peer wep keys for vdev 0: -122
[1699542.185851] ath10k_pci 0000:00:00.0: failed to disassociate station: [redacted] vdev 0: -122
[1699542.195550] ath10k_pci 0000:00:00.0: failed to delete peer [redacted] for vdev 0: -143
[1699542.204702] ath10k_pci 0000:00:00.0: found sta peer [redacted] (ptr ccce2214 id 146) entry on vdev 0 after it was supposedly removed
[1699542.220627] ath10k_pci 0000:00:00.0: failed to clear all peer wep keys for vdev 0: -2
[1699542.229072] ath10k_pci 0000:00:00.0: failed to disassociate station: [redacted] vdev 0: -2
[1699542.258511] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[1699542.282764] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 1745729a vdev: 0 addr: [redacted] 
[1699542.294328] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 4a15764a vdev: 0 addr: [redacted] 
[1699542.305848] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer 4f0570a2 vdev: 0 addr: [redacted] 
[1699542.420909] ieee80211 phy0: Hardware restart was requested
[1699543.373519] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[1699543.390513] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[1699543.397173] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[1699543.405672] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672'
[1699543.469298] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[1699543.483749] ath10k_pci 0000:00:00.0: rts threshold -1
[1699543.498663] ath10k_pci 0000:00:00.0: device successfully recovered
[1699543.505423] net_ratelimit: 1 callbacks suppressed
[1699543.505437] ath10k_pci 0000:00:00.0: failed to transmit packet, dropping: -19
[1699543.505449] ath10k_pci 0000:00:00.0: failed to submit frame: -19
[1699543.505456] ath10k_pci 0000:00:00.0: failed to push frame: -19

Otherwise everything is working fine.

Problem encryption = none with luci & mesh / SAE

There seems to be an issue with mesh (802.11s) and DFS channels on ETSI domains, in 21.02.3 that was not present in 21.02.2. My mesh continues to work fine with channel 108 when the regulatory domain is set to a non-ETSI country (e.g. US), but not with EU countries.

Similar symptoms have previously reported for 19.07.3, but I think it is likely that the underlying cause was different.

Working well on the Ubiquiti EdgeRouter X with the stman 19.07.2 kernel factory tar + the stock 21.02.3 squashfs image.

Far and away the best performance and consistency I've had thus far on my RPi 4B, best release I could ask for.

This release has worked well on my Netgear R7800. Nice work.

Will there be a new release in this development branch?

bump
any info?

I second this question. There have been 80+ commits since 21.02.3.

Since 22.03.0 was just released, the 21.02 series will eventually be EOL'd. As of now, there has been no such announcement. I don't have any insight into when the dev team will officially EOL 21.02, but what I can say is that, if 19.07 is a reasonable precedent, the n-1 version may be updated for a little while longer for bug fixes and security patches, often in tandem with (or nearly so) with newest version.

2 Likes

21.02.4 has been released.

Similarly, the first service release for 22.03 has been released.

4 Likes