I have noticed that the Radio on my TP-Link CPE610 V1 is running at a lower power level on 21.02 RC3 than it used to. I noticed that in the Bootup messaged that Its Reporting ‘EEPROM regdomain sanitized’ whereas before it reported ‘EEPROM regdomain 0x0’. How do I fix this?
See Log Snippets below
Openwrt 21.02 RC3
[ 10.662123] Loading modules backported from Linux version v5.10.42-0-g65859ec
a4dff
[ 10.669889] Backport generated by backports.git v5.10.42-1-0-gbee5c545
[ 10.743865] xt_time: kernel timezone is -0000
[ 10.763802] urngd: v1.0.2 started.
[ 10.992433] PPP generic driver version 2.4.2
[ 11.005619] NET: Registered protocol family 24
[ 11.135594] ath: EEPROM regdomain sanitized
[ 11.135609] ath: EEPROM regdomain: 0x64
[ 11.135613] ath: EEPROM indicates we should expect a direct regpair map
[ 11.135640] ath: Country alpha2 being used: 00
[ 11.135644] ath: Regpair used: 0x64
[ 11.150472] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.153134] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12
Code Based on 19.07
[ 7.725388] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
[ 7.750243] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 7.936844] xt_time: kernel timezone is -0000
[ 8.147163] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.216578] urngd: v1.0.2 started.
[ 8.454193] ath: EEPROM regdomain: 0x0
[ 8.454205] ath: EEPROM indicates default country code should be used
[ 8.454208] ath: doing EEPROM country->regdmn map search
[ 8.454226] ath: country maps to regdmn code: 0x3a
[ 8.454233] ath: Country alpha2 being used: US
[ 8.454237] ath: Regpair used: 0x3a
[ 8.471263] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.473135] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12