OpenWrt 18.06 TP-Link TL-WR841N(D) v9 (4/32)

Hi everyone,
According to Table of Hardware:[Model*~]=WR841N OpenWRT 18.06_ does support TP-Link TL-WR841N(D) v9.
However, I remember about 4/32 warning:

does anyone know/actually tried if OpenWRT 18.06 will work stable on TP-Link TL-WR841N(D) v9 which is 4/32MB?

I tried it on v8, v9, v11. And they work stable.

All 4/32 Tp-Link devices work well on 18.06 and trunk if you don't install too much software.
The basic config with LuCI fits with no problems.

The wan port on my TL-WR841ND v9(with 18.06.x) is unstable, sometimes I have to reboot several times until the port connects properly.

With the snapshot version for ath79, it works better.

1 Like

Hi, I have tried to run 18.06.1 on my TP-Link TL-WR841N(D) v9 and unfortunately in my case it is unstable.
It wont keep configuration after reboot and also hang ups/reboots every once in a while.

Also - what surprised me - I tried to install latest available snapshot of 15.05.1 and it also does not work stable.
Only official release 15.05.1 works for me.

1 Like

It's the same for me. 15.05.1 is stable and 18.06.1 keeps freezzing

1 Like

This means you're out of space after flashing. There's not enough room for configs.

This seems normal for a 4/32 device nearing its end, have you tried a Snapshot release, without LuCI?

A post was split to a new topic: TL-WR841N v9 / 15.05: unable to log in