Openconnect VPN Client Port Forwarding Problem

hello everyone, i have Ocserv vpn server and openconnect client connected, i want port forwarding from server public ip wan to openconnect client address wich is port forwarding Source zone is WAN and Destination zone selected LAN but not works. anyone can help?

1 Like

Collect the diagnostics and post it to redacting the private parts:

uci show network; uci show firewall; uci show ocserv; \
ip address show; ip route show table all; ip rule show; iptables-save -c
1 Like

Check the port from outside while monitoring the output:

opkg update
opkg install tcpdump
tcpdump -evni any port 8090

See also:

I see both requests and replies, so it appears to be working.
Although you have posted diagnostics from the LAN.
Probably you want to check it from WAN as well.

vgaetera Thank you for your attention, Solved my issue. from luci i add new interface Physical Settings vpns0 and add new firewall zone with this covered networks, and works great.

1 Like

If your problem is solved, please consider marking this topic as [Solved]. See How to mark a topic as [Solved] for a short how-to.

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.