Sorry about the delay, but here is the kernel log:
<5>[ 0.000000] Linux version 2.6.32.9-00022-g411b42a (froyo@ubuntu) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Thu Dec 17 15:00:22 PST 2015
<4>[ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[ 0.000000] Machine: NVIDIA Tely Development System
<4>[ 0.000000] Framebuffer tag with 65536 handle
<4>[ 0.000000] Shmoo tag with 65537 handle
<4>[ 0.000000] Found a warmboot tag!
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 98304
<7>[ 0.000000] free_area_init_node: node 0, pgdat c05c2bc0, node_mem_map c06f3000
<7>[ 0.000000] DMA zone: 768 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 97536 pages, LIFO batch:31
<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c09ff000 s11104 r8192 d13472 u65536
<6>[ 0.000000] pcpu-alloc: s11104 r8192 d13472 u65536 alloc=16*4096
<6>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
<5>[ 0.000000] Kernel command line: mem=384M@0M nvmem=128M@384M vmalloc=256M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc tegrapart=recovery:380:800:1000,boot:b80:800:1000,mbr:1380:100:1000,system:1480:c800:1000,cache:dc80:c800:1000,misc:1a480:200:1000,staging:1a700:1400:1000,userdata:1bb80:4fe80:1000
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 384MB = 384MB total
<5>[ 0.000000] Memory: 382080KB available (5436K code, 1455K data, 176K init, 0K highmem)
<6>[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:416
<4>[ 0.000000] Console: colour dummy device 80x30
<6>[ 3.796881] Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240)
<4>[ 4.066887] Mount-cache hash table entries: 512
<6>[ 4.067271] CPU: Testing write buffer coherency: ok
<6>[ 4.067448] Calibrating local timer... 1.19MHz.
<4>[ 4.176942] CPU1: Booted secondary processor
<6>[ 4.446733] Brought up 2 CPUs
<6>[ 4.446747] SMP: Total of 2 processors activated (3991.14 BogoMIPS).
<7>[ 4.446767] CPU0 attaching sched-domain:
<7>[ 4.446778] domain 0: span 0-1 level CPU
<7>[ 4.446788] groups: 0 1
<7>[ 4.446805] CPU1 attaching sched-domain:
<7>[ 4.446813] domain 0: span 0-1 level CPU
<7>[ 4.446820] groups: 1 0
<6>[ 4.470774] NET: Registered protocol family 16
<4>[ 4.471119] Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x4 SKU: 0x8
<4>[ 4.471771] NVRM Got shmoo boot argument (at 0xd8874004)
<4>[ 4.471782] NVRM corner (2, 1)
<4>[ 4.471983] NVRM CLOCKS: PLLX0: 1000000 Khz
<4>[ 4.471992] NVRM CLOCKS: PLLM0: 666000 Khz
<4>[ 4.471999] NVRM CLOCKS: PLLC0: 600000 Khz
<4>[ 4.472005] NVRM CLOCKS: PLLP0: 216000 Khz
<4>[ 4.472010] NVRM CLOCKS: PLLA0: 11289 Khz
<4>[ 4.472017] NVRM CLOCKS: CPU: 1000000 Khz
<4>[ 4.472022] NVRM CLOCKS: AVP: 240000 Khz
<4>[ 4.472028] NVRM CLOCKS: System Bus: 240000 Khz
<4>[ 4.472036] NVRM CLOCKS: Memory Controller: 333000
<4>[ 4.472043] NVRM CLOCKS: External Memory Controller: 666000
<4>[ 5.288558] ADJUSTED CLOCKS:
<4>[ 5.288573] MC clock is set to 333000 KHz
<4>[ 5.288584] EMC clock is set to 666000 KHz (DDR clock is at 333000 KHz)
<4>[ 5.288592] PLLX0 clock is set to 1000000 KHz
<4>[ 5.288598] PLLC0 clock is set to 600000 KHz
<4>[ 5.288604] CPU clock is set to 1000000 KHz
<4>[ 5.288609] System and AVP clock is set to 240000 KHz
<4>[ 5.288618] GraphicsHost clock is set to 111000 KHz
<4>[ 5.288626] 3D clock is set to 111000 KHz
<4>[ 5.288633] 2D clock is set to 111000 KHz
<4>[ 5.288640] Epp clock is set to 111000 KHz
<4>[ 5.288647] Mpe clock is set to 111000 KHz
<4>[ 5.288654] Vde clock is set to 240000 KHz
<4>[ 5.326720] Local timer scaling factor 2097, shift 24
<6>[ 5.326755] PL310/L2C-310 cache controller enabled
<7>[ 5.346289] kfuse_cache_isvalid=1
<4>[ 5.421394] bio: create slab <bio-0> at 0
<5>[ 5.422278] SCSI subsystem initialized
<6>[ 5.422593] usbcore: registered new interface driver usbfs
<6>[ 5.422808] usbcore: registered new interface driver hub
<6>[ 5.422959] usbcore: registered new device driver usb
<6>[ 5.424122] Bluetooth: Core ver 2.15
<6>[ 5.424277] NET: Registered protocol family 31
<6>[ 5.424284] Bluetooth: HCI device and connection manager initialized
<6>[ 5.424294] Bluetooth: HCI socket layer initialized
<6>[ 5.424529] Switching to clocksource timer_us
<6>[ 5.428892] NET: Registered protocol family 2
<6>[ 5.428969] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 5.429131] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 5.429336] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
<6>[ 5.429549] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 5.429558] TCP reno registered
<6>[ 5.429659] NET: Registered protocol family 1
<6>[ 5.429787] Unpacking initramfs...
<6>[ 5.438760] Freeing initrd memory: 164K
<4>[ 5.439593] tegra_iovmm_register: added iovmm-gart
<6>[ 5.441599] input: Tely Infrared Receiver as /devices/platform/rm-cir.0/input/input0
<6>[ 5.454716] board_id_init called
<6>[ 5.454982] board_id_probe called
<6>[ 5.455131] nvrm_init called
<4>[ 5.455171] nvrm probe
<6>[ 5.461476] ashmem: initialized
<6>[ 5.473021] alg: No test for stdrng (krng)
<6>[ 5.473058] io scheduler noop registered
<6>[ 5.473067] io scheduler anticipatory registered
<6>[ 5.473074] io scheduler deadline registered
<6>[ 5.473322] io scheduler cfq registered (default)
<6>[ 5.475211] tegra_grhost tegra_grhost: initialized
<4>[ 5.475668] nvtegrafb: base address: d9000000 physical: 1fec1000
<4>[ 5.481319] Console: switching to colour frame buffer device 80x30
<6>[ 5.496205] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 5.496746] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
<6>[ 5.987529] console [ttyS0] enabled
<6>[ 6.007241] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
<6>[ 6.013745] Registered UART port ttyHS2
<6>[ 6.017915] Initialized tegra uart driver
<6>[ 6.024806] loop: module loaded
<6>[ 6.028816] PPP generic driver version 2.4.2
<6>[ 6.033347] PPP Deflate Compression module registered
<6>[ 6.038426] PPP BSD Compression module registered
<6>[ 6.043249] usbcore: registered new interface driver asix
<6>[ 6.048764] usbcore: registered new interface driver cdc_ether
<6>[ 6.054824] usbcore: registered new interface driver smsc9500
<6>[ 6.060689] usbcore: registered new interface driver cdc_subset
<6>[ 6.066898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 6.073440] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
<6>[ 6.104746] tegra-ehci tegra-ehci.2: Tegra Ehci host controller
<7>[ 6.110712] /home/froyo/workspace/mydroid/kernel/drivers/usb/core/inode.c: creating file 'devices'
<7>[ 6.110728] /home/froyo/workspace/mydroid/kernel/drivers/usb/core/inode.c: creating file '001'
<6>[ 6.110930] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
<7>[ 6.118514] tegra-ehci tegra-ehci.2: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1
<7>[ 6.118526] tegra-ehci tegra-ehci.2: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
<7>[ 6.118589] tegra-ehci tegra-ehci.2: park 0
<7>[ 6.118602] tegra-ehci tegra-ehci.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
<7>[ 6.118614] tegra-ehci tegra-ehci.2: ...powerdown ports...
<6>[ 6.144705] tegra-ehci tegra-ehci.2: irq 129, io base 0xc5008000
<7>[ 6.150706] tegra-ehci tegra-ehci.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
<7>[ 6.150721] tegra-ehci tegra-ehci.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
<6>[ 6.164686] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
<7>[ 6.170654] usb usb1: default language 0x0409
<7>[ 6.170677] usb usb1: udev 1, busnum 1, minor = 0
<6>[ 6.170685] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 6.177475] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 6.184694] usb usb1: Product: Tegra Ehci host controller
<6>[ 6.190082] usb usb1: Manufacturer: Linux 2.6.32.9-00022-g411b42a ehci_hcd
<6>[ 6.196952] usb usb1: SerialNumber: tegra-ehci.2
<7>[ 6.201698] usb usb1: uevent
<7>[ 6.201818] usb usb1: usb_probe_device
<6>[ 6.201828] usb usb1: configuration #1 chosen from 1 choice
<7>[ 6.207418] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[ 6.207477] usb 1-0:1.0: uevent
<7>[ 6.207595] hub 1-0:1.0: usb_probe_interface
<7>[ 6.207603] hub 1-0:1.0: usb_probe_interface - got id
<6>[ 6.207611] hub 1-0:1.0: USB hub found
<6>[ 6.211374] hub 1-0:1.0: 1 port detected
<7>[ 6.215298] hub 1-0:1.0: standalone hub
<7>[ 6.215305] hub 1-0:1.0: individual port power switching
<7>[ 6.215312] hub 1-0:1.0: individual port over-current protection
<7>[ 6.215319] hub 1-0:1.0: Single TT
<7>[ 6.215326] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[ 6.215334] hub 1-0:1.0: power on to power good time: 20ms
<7>[ 6.215351] hub 1-0:1.0: local power source is good
<7>[ 6.215359] hub 1-0:1.0: enabling power on all ports
<7>[ 6.215552] /home/froyo/workspace/mydroid/kernel/drivers/usb/core/inode.c: creating file '001'
<6>[ 6.215629] tegra-ehci tegra-ehci.2: dmabounce: registered device
<6>[ 6.221951] usbcore: registered new interface driver cdc_acm
<6>[ 6.227615] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 6.236247] usbcore: registered new interface driver cdc_wdm
<6>[ 6.241906] Initializing USB Mass Storage driver...
<6>[ 6.246849] usbcore: registered new interface driver usb-storage
<6>[ 6.252861] USB Mass Storage support registered.
<6>[ 6.257756] usbcore: registered new interface driver usbserial
<6>[ 6.263579] usbserial: USB Serial Driver core
<6>[ 6.268053] USB Serial support registered for GSM modem (1-port)
<6>[ 6.274192] usbcore: registered new interface driver option
<6>[ 6.279775] option: v0.7.2:USB Driver for GSM modems
<6>[ 6.284849] USB Serial support registered for pl2303
<6>[ 6.289925] usbcore: registered new interface driver pl2303
<6>[ 6.295486] pl2303: Prolific PL2303 USB to serial adaptor driver
<6>[ 6.301501] Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
<7>[ 6.314701] tegra-ehci tegra-ehci.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
<7>[ 6.314716] hub 1-0:1.0: port 1: status 0101 change 0001
<6>[ 6.333505] android init
<6>[ 6.336063] android_probe pdata: c0596830
<6>[ 6.340190] android_bind
<7>[ 6.342717] android_bind_config
<4>[ 6.342724] Gadget Android: controller 'tegra-udc' not recognized
<6>[ 6.348821] android_usb gadget: android_usb ready
<6>[ 6.353514] tegra-udc: bind to driver android_usb
<6>[ 6.360839] f_adb init
<6>[ 6.363192] android_register_function adb
<6>[ 6.367208] f_mass_storage init
<6>[ 6.370341] android_register_function usb_mass_storage
<6>[ 6.375475] mass_storage_bind_config
<6>[ 6.379304] fsg_probe pdata: c0596a58
<6>[ 6.383270] android_usb gadget: Number of LUNs=1
<6>[ 6.387909] adb_bind_config
<6>[ 6.391508] mice: PS/2 mouse device common for all mice
<6>[ 6.397377] input: gpio-keys as /devices/platform/gpio-keys.3/input/input1
<6>[ 6.404802] input: nvodm_touch as /devices/virtual/input/input2
<6>[ 6.411051] nvodm_touch: Successfully registered the ODM touch driver d8b86004
<7>[ 6.414734] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
<7>[ 6.414753] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<6>[ 6.465018] using rtc device, tegra_rtc, for alarms
<6>[ 6.469735] tegra_rtc tegra_rtc: rtc core: registered tegra_rtc as rtc0
<5>[ 6.476567] tegra_rtc tegra_rtc: Tegra internal Real Time Clock
<6>[ 6.486705] tegra_rtc_odm tegra_rtc_odm: rtc core: registered tegra_rtc_odm as rtc1
<6>[ 6.494481] i2c /dev entries driver
<6>[ 6.500172] Linux video capture interface: v2.00
<6>[ 6.505130] usbcore: registered new interface driver uvcvideo
<6>[ 6.510871] USB Video Class driver (v0.1.0)
<6>[ 6.515948] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
<6>[ 6.524412] Bluetooth: HCI UART driver ver 2.2
<6>[ 6.528929] Bluetooth: HCI H4 protocol initialized
<6>[ 6.533711] Bluetooth: HCI BCSP protocol initialized
<6>[ 6.538681] Bluetooth: HCILL protocol initialized
<6>[ 6.543376] Bluetooth: BlueSleep Mode Driver Ver 1.1
<6>[ 6.548480] usb 1-1: new high speed USB device using tegra-ehci and address 2
<6>[ 6.556058] cpuidle: using governor ladder
<6>[ 6.560794] cpuidle: using governor menu
<6>[ 6.564825] sdhci: Secure Digital Host Controller Interface driver
<6>[ 6.571004] sdhci: Copyright(c) Pierre Ossman
<7>[ 6.580656] usb 1-1: default language 0x0409
<7>[ 6.581032] usb 1-1: udev 2, busnum 1, minor = 1
<6>[ 6.581041] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
<6>[ 6.587790] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>[ 6.594936] usb 1-1: Product: USB2.0 Hub
<7>[ 6.599008] usb 1-1: uevent
<7>[ 6.599144] usb 1-1: usb_probe_device
<6>[ 6.599155] usb 1-1: configuration #1 chosen from 1 choice
<7>[ 6.604911] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
<7>[ 6.604970] usb 1-1:1.0: uevent
<7>[ 6.605109] hub 1-1:1.0: usb_probe_interface
<7>[ 6.605118] hub 1-1:1.0: usb_probe_interface - got id
<6>[ 6.605126] hub 1-1:1.0: USB hub found
<6>[ 6.609282] hub 1-1:1.0: 4 ports detected
<7>[ 6.613297] hub 1-1:1.0: compound device; port removable status: RRRF
<7>[ 6.613305] hub 1-1:1.0: individual port power switching
<7>[ 6.613312] hub 1-1:1.0: individual port over-current protection
<7>[ 6.613693] hub 1-1:1.0: TT per port
<7>[ 6.613702] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
<7>[ 6.613709] hub 1-1:1.0: Port indicators are supported
<7>[ 6.613717] hub 1-1:1.0: power on to power good time: 100ms
<7>[ 6.614153] hub 1-1:1.0: local power source is good
<7>[ 6.614163] hub 1-1:1.0: enabling power on all ports
<4>[ 6.614193] mmc0: Invalid maximum block size, assuming 512 bytes
<6>[ 6.620379] mmc0: SDHCI controller on tegra-sdhci.0 [tegra-sdhci.0] using ADMA
<7>[ 6.621051] /home/froyo/workspace/mydroid/kernel/drivers/usb/core/inode.c: creating file '002'
<7>[ 6.621115] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
<6>[ 6.627616] tegra-sdhci tegra-sdhci.0: probe complete
<4>[ 6.676096] mmc1: Invalid maximum block size, assuming 512 bytes
<6>[ 6.682337] mmc1: SDHCI controller on tegra-sdhci.2 [tegra-sdhci.2] using ADMA
<6>[ 6.689633] tegra-sdhci tegra-sdhci.2: probe complete
<4>[ 6.715845] mmc2: Invalid maximum block size, assuming 512 bytes
<6>[ 6.721996] mmc2: SDHCI controller on tegra-sdhci.3 [tegra-sdhci.3] using ADMA
<7>[ 6.726157] hub 1-1:1.0: port 4: status 0101 change 0001
<6>[ 6.729221] tegra-sdhci tegra-sdhci.3: probe complete
<6>[ 6.738776] usbcore: registered new interface driver usbhid
<6>[ 6.744343] usbhid: v2.6:USB HID core driver
<6>[ 6.749056] logger: created 64K log 'log_main'
<6>[ 6.753644] logger: created 256K log 'log_events'
<6>[ 6.758529] logger: created 64K log 'log_radio'
<6>[ 6.763206] logger: created 64K log 'log_system'
<6>[ 6.764043] android_usb gadget: high speed config #1: android
<4>[ 6.774126] nf_conntrack version 0.5.0 (5977 buckets, 23908 max)
<4>[ 6.780636] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 6.788081] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 6.796049] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[ 6.802538] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 6.808025] TCP cubic registered
<6>[ 6.812419] NET: Registered protocol family 10
<6>[ 6.817371] IPv6 over IPv4 tunneling driver
<6>[ 6.821946] NET: Registered protocol family 17
<7>[ 6.824713] usb 1-1: link qh256-0001/d786cf00 start 1 [1/0 us]
<7>[ 6.824742] hub 1-1:1.0: state 7 ports 4 chg 0010 evt 0000
<7>[ 6.825173] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
<6>[ 6.826403] Bluetooth: L2CAP ver 2.14
<6>[ 6.830080] Bluetooth: L2CAP socket layer initialized
<6>[ 6.835127] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 6.839658] Bluetooth: SCO socket layer initialized
<6>[ 6.844602] Bluetooth: RFCOMM TTY layer initialized
<6>[ 6.849502] Bluetooth: RFCOMM socket layer initialized
<6>[ 6.854629] Bluetooth: RFCOMM ver 1.11
<6>[ 6.858377] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 6.863680] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<5>[ 6.869745] Registering SWP/SWPB emulation handler
<6>[ 6.874541] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
<6>[ 6.882984] tegra_rtc tegra_rtc: setting system clock to 1970-01-01 00:00:06 UTC (6)
<6>[ 6.890777] Freeing init memory: 176K
<4>[ 6.895644] mmc2: card is mmc v4 but doesn't support any high-speed modes.
<3>[ 6.895994] init: /init.rc: 179: invalid option 'chmod'
<3>[ 6.896009] init: /init.rc: 179: invalid option 'start'
<3>[ 6.896023] init: /init.rc: 179: invalid option 'chmod'
<7>[ 6.899725] usb usb1: uevent
<7>[ 6.900002] usb 1-0:1.0: uevent
<7>[ 6.900661] usb 1-1: uevent
<7>[ 6.900949] usb 1-1:1.0: uevent
<6>[ 6.918347] mmc2: new MMC card at address 0001
<6>[ 6.923322] mmcblk3: mmc2:0001 HYNIX 1.68 GiB
<6>[ 6.928377] usb 1-1.4: new high speed USB device using tegra-ehci and address 3
<6>[ 6.935838] mmcblk3: p1 p2 p3 p4 < p5 p6 >
<3>[ 6.952719] init: Cannot mount the device none at /acct as cgroup file system...retrying
<7>[ 6.988658] usb 1-1.4: default language 0x0409
<7>[ 6.998911] usb 1-1.4: udev 3, busnum 1, minor = 2
<6>[ 6.998920] usb 1-1.4: New USB device found, idVendor=0b95, idProduct=772a
<6>[ 7.005856] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 7.013165] usb 1-1.4: Product: AX88772A
<6>[ 7.017101] usb 1-1.4: Manufacturer: ASIX Elec. Corp.
<6>[ 7.022157] usb 1-1.4: SerialNumber: 000001
<7>[ 7.026602] usb 1-1.4: uevent
<7>[ 7.026748] usb 1-1.4: usb_probe_device
<6>[ 7.026760] usb 1-1.4: configuration #1 chosen from 1 choice
<7>[ 7.033035] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
<7>[ 7.034045] usb 1-1.4:1.0: uevent
<7>[ 7.034178] asix 1-1.4:1.0: usb_probe_interface
<7>[ 7.034189] asix 1-1.4:1.0: usb_probe_interface - got id
<6>[ 7.691031] ASIX USB Ethernet Adapter:v4.2.0 14:52:19 Dec 17 2015
<6>[ 7.691037] <6> http://www.asix.com.tw
<4>[ 7.701149] eth%d: status ep1in, 8 bytes period 11
<6>[ 7.706424] eth0: register 'asix' at usb-tegra-ehci.2-1.4, ASIX AX88772A USB 2.0 Ethernet, 54:20:18:00:4a:e6
<7>[ 7.716420] /home/froyo/workspace/mydroid/kernel/drivers/usb/core/inode.c: creating file '003'
<7>[ 7.716497] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0010
<3>[ 7.961330] init: Cannot mount the device none at /acct as cgroup file system...retrying
<3>[ 8.969760] init: Cannot mount the device none at /acct as cgroup file system...retrying
<3>[ 9.978068] init: Cannot mount the device none at /acct as cgroup file system...retrying
<3>[ 10.986405] init: Cannot mount the device none at /acct as cgroup file system...retrying
<3>[ 11.994571] init: Mount failed - Giving up
<3>[ 11.999390] init: Cannot mount the device none at /dev/cpuctl as cgroup file system...retrying
<3>[ 13.008275] init: Cannot mount the device none at /dev/cpuctl as cgroup file system...retrying
<3>[ 14.017195] init: Cannot mount the device none at /dev/cpuctl as cgroup file system...retrying
<3>[ 15.026046] init: Cannot mount the device none at /dev/cpuctl as cgroup file system...retrying
<3>[ 16.034914] init: Cannot mount the device none at /dev/cpuctl as cgroup file system...retrying
<3>[ 17.043591] init: Mount failed - Giving up
<4>[ 17.050417] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
<6>[ 18.826415] kjournald starting. Commit interval 5 seconds
<4>[ 18.826449] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
<6>[ 18.843496] EXT3 FS on mmcblk3p6, internal journal
<7>[ 18.848346] ext3_orphan_cleanup: deleting unreferenced inode 262429
<7>[ 18.848455] ext3_orphan_cleanup: deleting unreferenced inode 262428
<6>[ 18.848494] EXT3-fs: mmcblk3p6: 2 orphan inodes deleted
<6>[ 18.853724] EXT3-fs: recovery complete.
<6>[ 19.582352] EXT3-fs: mounted filesystem with journal data mode.
<6>[ 19.620774] kjournald starting. Commit interval 5 seconds
<4>[ 19.620788] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
<6>[ 19.637358] EXT3 FS on mmcblk3p2, internal journal
<6>[ 19.642146] EXT3-fs: recovery complete.
<6>[ 19.649823] EXT3-fs: mounted filesystem with journal data mode.
<6>[ 19.681751] kjournald starting. Commit interval 5 seconds
<4>[ 19.681761] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
<6>[ 19.698628] EXT3 FS on mmcblk3p3, internal journal
<6>[ 19.703415] EXT3-fs: recovery complete.
<6>[ 19.711138] EXT3-fs: mounted filesystem with journal data mode.
<3>[ 19.793176] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<3>[ 19.811323] init: property name too long in trigger property:persist.service.adb.enable_NV_DISABLED=1
<6>[ 19.885445] enabling adb
<6>[ 19.904858] adb_open(adbd)
<6>[ 20.010091] adb_release
<6>[ 20.012584] adb_open(adbd)
<4>[ 20.083168] DTT: T = 41, Range = 1 (-64 : 60)
<4>[ 20.112310] NvRmIoctls_NvRmFbControl: deprecated
<6>[ 20.142308] android_usb gadget: high speed config #1: android
<3>[ 20.148200] NvRmGpioAcquirePinHandle: gpio_request for 173 (V.5) failed (-16)
<6>[ 20.308768] warning: `rild' uses 32-bit capabilities (legacy support in use)
<3>[ 20.588912] NvRmGpioAcquirePinHandle: gpio_request for 173 (V.5) failed (-16)
<3>[ 20.614776] NvRmGpioAcquirePinHandle: gpio_request for 173 (V.5) failed (-16)
<6>[ 21.241382] ioModule=30, instance=0, config=2, enable=0
<6>[ 22.484617] ioModule=30, instance=0, config=2, enable=1
<6>[ 22.519777] nvrm_notifier_store: nvrm_daemon=850
<6>[ 22.525388] nvrm_notifier_show: blocking
<6>[ 36.281196] request_suspend_state: wakeup (3->0) at 32476523328 (1970-01-01 00:00:35.898214138 UTC)
<4>[ 36.764737] ## wifi_probe
<4>[ 36.767375] wifi_set_power = 1
<4>[ 37.206861] wifi_set_carddetect = 1
<4>[ 37.212962]
<4>[ 37.212966] Dongle Host Driver, version 4.218.223.1
<7>[ 37.534453] mmc0: queuing CIS tuple 0x80 length 50
<7>[ 37.564715] mmc0: queuing CIS tuple 0x80 length 7
<7>[ 37.575615] mmc0: queuing CIS tuple 0x80 length 7
<7>[ 37.676177] mmc0: queuing CIS tuple 0x02 length 1
<6>[ 37.681459] mmc0: new SDIO card at address 0001
<4>[ 37.690329] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 38.315602] Firmware version = wl0: Jan 12 2011 13:49:20 version 4.218.248.20
<4>[ 38.471360] wlan0: Broadcom Dongle Host Driver mac=4c:aa:16:25:45:e5
<4>[ 38.479311] Enter wl_control_wl_start
<4>[ 38.483087] Exited wl_control_wl_start
<4>[ 40.343024] Unkown PRIVATE command, ignored
<4>[ 40.349639] Unkown PRIVATE command, ignored
<4>[ 40.356176] Unkown PRIVATE command, ignored
<4>[ 40.360749] Unkown PRIVATE command, ignored
<4>[ 40.366361] Unkown PRIVATE command, ignored
<7>[ 48.576047] wlan0: no IPv6 routers present
This was gotten over ADB. I couldn't identify a serial port header. There seems to be an unsoldered and very tiny JTAG port but I don't have JTAG equipment.