Hi,
I configured LuCi as usual but this time i don't have any wireless associated on my device. I use linksys ea8500.
root@OpenWrt:~# cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option path 'soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
option country 'CA'
option cell_density '0'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'xxxxxx'
option encryption 'psk2'
option key 'xxxxx'
config wifi-device 'radio1'
option type 'mac80211'
option path 'soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0'
option band '5g'
option htmode 'VHT80'
option channel '157'
option country 'CA'
option cell_density '0'
option txpower '30'
option disabled '0'
config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'xxxx'
option encryption 'psk2'
option key 'xxxxxx'
config wifi-iface 'guest'
option device 'radio1'
option mode 'ap'
option network 'guest'
option ssid 'xxxxxx'
option encryption 'psk2'
option key 'xxxxxx'
root@OpenWrt:~# cat /etc/config/network
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdd0:c268:2a32::/48'
config device
option name 'br-lan'
option type 'bridge'
list ports 'eth1.1'
config device
option name 'eth1.1'
option macaddr 'c0:xxxxxxx'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config device
option name 'eth0.2'
option macaddr 'c0:56xxxxxx'
config interface 'wan'
option device 'eth0.2'
option proto 'dhcp'
option metric '5'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '1 2 3 4 6t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '5 0t'
config device 'guest_dev'
option type 'bridge'
option name 'br-guest'
config interface 'guest'
option proto 'static'
option device 'br-guest'
option ipaddr '192.168.3.1'
option netmask '255.255.255.0'
config interface 'wg0'
option proto 'wireguard'
option force_link '1'
option private_key 'WOAZLAb+2DRZi4xxxxxxxxxxxxxxxx'
list addresses 'xxxxxxxx/16'
option mtu '1390'
option metric '10'
config wireguard_wg0
option description 'mtl'
option public_key 'xxxxxxxxxxxxxxxxxxxx'
list allowed_ips '0.0.0.0/0'
option route_allowed_ips '1'
option endpoint_host 'xxxxxxxx'
option persistent_keepalive '25'
root@OpenWrt:~# cat /etc/config/dhcp
config dnsmasq
option domainneeded '1'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option localservice '1'
option noresolv '1'
option ednspacket_max '1232'
option confdir '/tmp/dnsmasq.d'
list server '/pool.ntp.org/1.1.1.1'
list server '/time.cloudflare.com/1.1.1.1'
list server '127.0.0.1#5353'
config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '12h'
option dhcpv4 'server'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
config odhcpd 'odhcpd'
option maindhcp '0'
option leasefile '/tmp/hosts/odhcpd'
option leasetrigger '/usr/sbin/odhcpd-update'
option loglevel '4'
config dhcp 'guest'
option interface 'guest'
option start '100'
option limit '150'
option leasetime '1h'
option netmask '255.255.255.0'
